Supply, Installation and Maintenance of SCADA system for Chhapi Dam District-Jhalawar, Rajasthan

Local Control System for Chapi Dam

Supply of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, 7” or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification. (Including 1 KVA UPS for Power back up of minimum 2 hours)

Supply of Shaft Encoder based rotary position sensor with local digital Display & Proximity limit switches type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Supply of 3 Phase VFD Starter panel for each motor of dam & head regulator gates which shall consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Supply of Pan Tilt Zoom (PTZ) 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP based (DIGITAL) Camera, 500 meters. Night Vision (Multiple Intelligent Array system) in IP 66, Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling required for monitoring. As per technical specifications.

Supply of Bullet Camera (Fixed Type)- IP DIGITAL Night Vision (I.R.) Outdoor Weather Resistant, 2 Mega Pixel, 72 LED Color Camera. 6 or 8 or 12 MM (According to site suitability) 2 MP Auto Iris Lens in Elegant Metal Die Cast Housing. Outdoor weather resistant IP 66, for monitoring the gates operation complete as per technical specifications.

Supply of Water Level transmitter non-contact Ultrasonic/RADAR type having 10m range for measuring downstream discharge of RMC head regulator, including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications

Supply of Water Level transmitter non-contact RADAR type having 35 m range for Inflow & Outflow measurement level cum discharge at remote monitoring stations, including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Supply of Datalogger/RTU with 2 channel input type with GPRS/GSM based telemetry including antenna, Enclosure, and all necessary equipment for data transmission for remote monitoring stations, as per technical specifications.

Supply of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing uninterrupted power supply to remote monitoring stations per technical specifications.

Chhapi Dam Control Room Equipment’s Supply of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. All the Electrical fittings will be Industrial type. Including suitable switch mode power supply (SMPS), 12” display & interconnection with related remote PLC/RTU’s, complete as per technical specification.

Supply, engineering and development of customized SCADA software for complete System for Chhapi Dam & Head regulator automation with lifetime licensed version as per technical specifications.

Supply of Master server which includes Server with server Rack and industrial grade monitor with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications.

NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format with dedicated sufficient Hard Drive to have memory of at least 30 days as per technical Specifications

Supply of IT Hardware which includes required Static IP, Router, Switch, firewall system and A3 color printer as per technical specifications.

Supply of 86” or above LED Display/ Video wall System for monitoring of SCADA & Surveillance system at Dam Control Room as per technical specifications

Supply of laptops & 4G/3G internet dongle along with licensed version of Client SCADA software for remote viewing & monitoring of system as per technical specifications

Supply of online 3 KVA UPS with Battery system for power backup of Control room equipment’s including all necessary cabling & electrical fittings complete as per the technical specifications

Supply of Diesel Generator Set 10.0 KVA with 04 Earth Pits for earthing along with accessories complete as per technical specifications.

Local Control System for Chhapi Dam Installation, testing & Commissioning of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, 7 inches or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification. (Including 1 KVA UPS for Power back up of minimum 2 hours)

Installation, testing & commissioning of Shaft Encoder based rotary position sensor with local Digital Display & Proximity limit switches type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Installation, testing & commissioning of 3 Phase VFD Starter panel for each motor of Dam gates & head regulator gates which consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Installation, Testing & Commissioning & integration with NVR Located at Control Room of Pan Tilt Zoom (PTZ) Cameras, 36 X Optical and 12 X Digital Zoom: 2 Mega Pixel IP (DIGITAL) Camera, 500 meters. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling & conducting required for monitoring. As per technical specifications.

Installation, testing and Commissioning & integration with NVR located Control Room of Bullet Camera (Fixed Type)- IP DIGITAL Night Vision (I.R.) Outdoor Weather Resistant, 2 Mega Pixel 72 LED Color Camera with Sim Card Slot, 2 Mega Pixel 2 OR4 Array/ 72 LED Co 6 or 8 or 12 MM (According to site suitability) 2 MP Auto Iris Lens in Elegant Metal Die Cast Housing. Outdoor weather resistant IP 66, for monitoring the gates operation, complete in all respects as per technical specifications.

Installation, testing & Commissioning of Water Level transmitter non-contact Ultrasonic/RADAR type having 10 m range for measuring downstream discharge of RMC head regulator. Including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Installation testing and commissioning of Water Level transmitter non-contact RADAR type having 35m range for measurement level/discharge at remote monitoring stations, including all necessary cabling with suitable conduits & electrical fittings & mast and integration with Datalogger/RTU system complete as per technical specifications.

Installation testing and commissioning of Datalogger/RTU with 2 channel input type with GPRS/GSM based telemetry including antenna and all necessary equipment for data transmission for remote monitoring stations, as per technical specifications.

Installation testing and commissioning of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing un-interrupted power supply to remote monitoring stations as per technical specifications.

Chhapi Dam Control Room Equipment’s Installation, Testing & Commissioning of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Including suitable switch mode power supply (SMPS), 12” display & cabling with Industrial grade type electrical fittings for related remote PLC/RTU’s, as per technical specification.

Engineering, testing & Commissioning of customized SCADA software for complete Dam and head regulator with lifetime licensed version as per technical specifications.

Installation, Testing & Commissioning of Master server with SCADA Software which includes Server with server Rack and industrial grade PC with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications.

Installation, testing & commissioning of NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format. with dedicated Hard Drive to have memory of at least 30 days as per technical Specifications.

Installation, Testing & Commissioning of IT Hardware which includes required Static IP, Router with modem, Switch, firewall system and A3 Color printer as per technical specifications.

Installation, Testing & Commissioning 86” or above LED Display/ Video wall System for monitoring of SCADA & surveillance system at Dam Control Room as per technical specifications.

Charges for high-speed synchronous internet connection (min. 8 mbps upload and download speed) & Static IP for Five years at dam Control room.

Charges for High speed 4G/3G internet dongle for laptop with Client SCADA software for remote viewing & monitoring of Complete SCADA system for Five years.

Installation, Testing & Commissioning of Online 3 KVA UPS with Battery system for power back up of Dam control room equipment’s another for existing control room as per the technical specifications.

Installation, Testing and Commissioning of Diesel Generator Set 10.0 KVA with 04 Earth Pits for earthing, Starter Panel, Energy meter & cabling Complete in all respects as per technical specifications.

Five Years Operation & Maintenance and Comprehensive Warranty for Chhapi dam & Head Regulator SCADA based automation system as per Price schedule after final acceptance of SCADA & Surveillance system. This includes replacement of material & consumable as & when required at bidders’ cost. The cost of Communication for GPRS & SIM charges for data transmission, maintenance and other related charges. Minimum one Service Engineer shall be placed at Dam Control room for Operation of SCADA & Surveillance system.

Training of the purchaser's personnel at the supplier’s plant and/or/onsite in assembly, start up, operation, maintenance and/or repair of the supplied goods. Course topics will include sensor calibration, Datalogger/RTU, PLC/RTU & SCADA configuration, data downloading, data retrieval, collection, Trouble shooting, processing maintenance requirements and procedure for equipment configuration, installation, site testing and commissioning including training kit containing course material in soft and hard copies.

Security guard without gun for watch and ward (24 x7 hr.)

Construction of Control room & Gauge wells for SCADA at Chhapi Dam Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix1: 3: 6 (1 cement: 3 coarse sand 6 graded stone aggregate 20mm nominal size).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including Preparation of base and all scaffolding: old work (one or more coats) including scrapping surface and necessary repairs: Same Colour

Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingle sand.

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 (1-Cement: 6-Sand).

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor Three level in all shapes and sizes in: Cement mortar 1: 4 (1 cement: 4 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50 Mtr. and all lift. Supply, & stacking good earth at site complete including loading unloading & transportation etc. good soil of earth.

Random rubble dry stone Kharanja under floor.

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for upto floor Three level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for: Columns, pillars, posts, and struts etc.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for: Walls (any thickness) including attached pilasters, buttresses plinth and string course. Add extra for shuttering in circular work (in respective centering and shuttering items)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, and binding (including cost of binding wire) all complete up to floor Three level. Thermo Mechanically treated bars(Tata/Sail)

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircasesetc.M20 grade Nominal Mix

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish 12 mm thick

Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour tile such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4).

P&F Ist quality vitrified/porcelain polished tiles on floor,skirting and steps etc in different sizes (Thickness to be specified by manufacturer) with water absorption less than 0.08 % and confirming to IS:15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1:4 including grouting the joints with white cement and matching pigment etc complete of size 600 x600 mm

Providing and fixing of UPVC casement fully openable windows (outward / inward): Outer Frame made from the Extruded UPVC Windows profile section of size 60w X 60h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber construction, White in finish, duly reinforced with 1.5mm thick GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be watertight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 60w X 80h mm UPVC profile section with steel reinforcement shall be provided in windows having 2 or more openable shutters, as per the requirement. Frame shall have co-extruded with EPDM/TPE-E gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness

Providing and fixing in cement sand mortar 1: 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry: size 100 x 75 mm

Providing and fixing external grade boards, solid core single leaf flush door sutters IS: 2202-67 marked using phenol formal dehydreresin glue both sides with approved steel fittings complete as per annexure 'A' 35 mm thick commercial veneer both sides.

Providing and applying white cement-based putty over plastered surface to prepare the surface even and smooth complete

Painting exterior sutface of wall with 100 % acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including with preparation of base with sand papering, primer, putty etc complete in all respect: New Work

old work rest house

Providing and fixing 50 mm dia G.I. Medium 'B' class railing with two horizontal pipes and 1.5 Mtr. Long vertical pipe 1.5 Mtr. Centre to centre with all accessories, like elbows, tees etc. including welding, thereading and embedding in cement concrete 1: 2: 4 block of size 30 x 30 x 40 cm. with 2 Nos. angle iron 25 x 25 x 5 mm size holdfast complete as per design and drawings.

P & F Ist quality W.V.C. urinal (IS: 2556 Mark) with 25 mm dia GI pipe, dome waste coupling, concealed iron brackets or screws etc. complete Flat back (large) or half stall size 610x400x80 mm

P&F white vitreous china double syphonic European WC (IS:2556 Mark) with mounted WVC flushing cistern (IS: 2556 Mark) of 10 liters capacity complete with all necessary internal fittings including cutting and making good the wall and floors (IS 2548 marked) grade I black for EWC.

P&F Water closed seat covers with brass hings complete. solid PVC (ISI marked) grade I white for EWC

Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.150mm dia

P&F WVC wash basin (Ist quality, IS: 2556 mark) of approved make with C.I. Brackets duly painted ,1 No. 15 mm C.P. Piller cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make , 25 mm G.I Waste pipe complete including cutting & making good the wall : Size 580mm x 450mm (ISI Marked with superior quality of approved make)

P&F Grating of approved quality/ make stainless steel sheet size 125mm dia. Heavy quality of approved make

P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make: C.P. Pillar cock, Swan-neck with casted spout, 15 mm nominal bore.

P&F Beveled edge mirror of special glass of approved make (Atul / equivalent) complete with 6 mmm thick asbestos cement sheet ground fixed to wooden screws & washers. Size 600mm x 450mm x 4mm thick

P&F Acrylie toilet accessories set consisting of towel rail, shelf, towel ring, soap dish, paste & brush holder & twin peg of approved quality/make.

P&F Jet spray for water closet with C.P Coper Tube flange of approved make .

P&F Piller cock (IS : 8934 mark) superior quality of approved make : CP Piller cock , 15 mm dia nominal bore

P&F Bib cock (IS : 8931 mark) superior quality & of approved make brass wt. 400 gm 15 mm . Nominal Bore

P&F stop cock (IS : 8931 mark) superior quality & of approved make : brass wt. 400 gm. 15mm. Nominal Bore

P&F Inlet connection (Angle Values) Superior quality of approved make C.P Inlet connection 15 mm brass (IS 8931 marked)

P&F 15mm dia connection pipe of approved quality /make PVC pipe with C.P. brass up to length nuts 450 mm.

P&F mixing range (15mm) C.P. Wall mixer telephonic type crutch & telephonic shower.

P&F PVC storage tank confirming to (IS: 12701 marked indicating BIS license no.) standards of approved make with cover ,25 mm dia 1 mm long GI overflow pipe & 25 cm.long wash out pipe with plug & socket ,including making connection etc. complete of approved disign , 500 litre capacity

P&F GI pipes (external work) with GI fitting (IS : 1239 mark) including trenching & refilling earth etc. 15 mm dia nominal bore ,'B' class

P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.25 mm dia nominal bore ,'B'Class

P&F rigid PVC pipe (IS : 4985 mark) class II /(4 Kg./cm2)approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant : 110 mm dia .

P&F rigid PVC pipe fitting (IS : 4985 mark) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant : 110 mm dia . Coupler (Socket)

Plain Tee

Door Tee

Vent cowel

Pipe clip

P-trap

Gully trap

Reduccer 110x75

P & F W.V.C. Urinal Partition plate of approved standard make of size 630x315 mm including making good the wall.

Providing & Fixing 1.00 mm thick mica of approved make for inner/outer side of flush door shutters with fevicol and nails complete as per requirement & approved by engineer-in-charge.

Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Black marble Bhaislana, Abu, KishangarhZebra(Black Marble) up 801 Cm2 to 1500 Sq cm.

Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's all accessories, round tiles, Hot Dipped Galvanized Modular Box of 18 SWG with earth terminal, 6 A Modular switch,3 pin ceiling rose / lamp holder/ 3 point connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws etc, all as per pre-approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's all accessories( J.B. , Bends etc.) , round tiles, 18 SWG Hot Dipped Galvanized Modular Box with earth terminal, 6 A modular switch, 3/ 5 pin 6 A modular socket, Modular face plate with grid plate, screws etc., all as per pre-approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. On board

S&F following sizes (dia.) of ISI marked (IS:9537 P - II) rigid steel conduit of appropriate thickness related to its dia as per PWD specification for electrical Works along with accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, screws etc. as required including cutting the wall and making good the same as required all as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.25 mm

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre-approved by Engineer in charge, making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. 2 x 2.5 sq. mm. + 1x1.5sqmm

2 x 4 sq. mm. + 1x2.5sqmm

2 x 6 sq. mm. + 1x2.5sqmm

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. (Group I) Single pole MCB 6 A to 32 A rating

Triple pole MCB 40 A 63 A rating

SITC of IP 40 3 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardant & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings as per PWD specification for electrical Works, conforming to IS/IEC 60947 P -2 :2003 with front face and centralized adjustable, trip free mechanism, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less than 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 800 V, provision for UVR, shunt trip, earth fault trip, door interlock, pad lock & rotary handle, including making connections with lugs & spreaders, etc. as required. OEM shall have submitted NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. With Thermal Magnetic release. up to 100 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % ICU

Providing & Fixing of IK09 rating recessed/surface mounting heavy duty Vertical type sheet steel 1.6 mm thick Distribution board as per PWD specification for electrical Works ISI marked conforming to IS-13032 & IS-8623 / conforming to IEC 61439-3 with provision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing , phosphatized ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet, including making internal DB terminations with copper lugs and with detachable gland plate , testing etc. as required complete in all respect.OEM shall have submit NABL / CPRI / ERDA accredited lab test reports before execution & All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. Double door 6 Way(8+18)

Providing & fixing of ISI marked (IS:1293) 6 amp unbreakable 3 pin plug top with lamp indicator as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire-resistant ABS material, brass terminal including making connection testing etc. as required. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.

Providing & fixing of non-modular socket size flush type 180-watt rotary minimum 5 step fan regulator as per PWD specification for electrical Works, ISI marked (IS:11037) made out from industrial grade Polycarbonate or fire-resistant ABS material including making connection testing etc. as required. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .

Providing & fixing of ISI marked (IS:1258) 6-amp batten/angle lamp holder as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire-resistant ABS material, brass terminal & captive screws including making connection testing etc. as required. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.

Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 18 SWG with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 3/5 pin 16 amp. socket outlet (IS:1293) [ as per detailed in respective item in BSR, making connection, testing, etc. as required. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.

P & F of recess mounting CR luminaire made from powder coated CRCA sheet with Perforations on the body with metalized polystyrene louvers, complete with accessories Extra low watt loss copper ballast, starter, — holder, condenser, terminal block duly prewired With copper conductor including making — connections, testing etc. as required (without Lamp). 2 X PL-36 Watt CFL

Plate Earthing as per PWD specification for electrical Works as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurement book. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.

Supply &laying following size earth wire in horizontal or vertical run-in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu thimble etc. as required. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.8 SWG G.I. (Hot Dipped) Wire

Providing & Fixing of Heavy duty capacitor start, copper woind Double ball bearing 900/1400 RPM single phase-Exhaust fan as per PWD specification for electrical Works, conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. 300 mm sweep (900/1400 RPM)

Providing &fixing of ISO Certified company made BEE Star rated copper wounded double ball bearing capacitor start, aluminum body & Metallic blade ceiling fan as per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885 -P-V- 1981. with down rod up to 30 cm with secondary support safety cable (steel wire), cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. Appropriate OEM test certificate shall be submitted by contractor. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5)

Providing & Fixing of metal clad industrial plug top & socket unit with pin and sleeve type copper contact on porcelain/ Bakelite base in sheet steel( CRCA) powder coated enclosure as per PWD specification for electrical Works conforming to Is 8623 & IEC 61439-3 (without MCB) including , all as per pre-approved by Engineer in charge,making connections,, testing etc.as required .OEM shall have submit NABL / CPRI / ERDA accredited lab test reports before execution & All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. 30A-32A(three phase Three pole)

63 A (Three phase Five pin 3P +N +E))

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armored / Armored aluminum cable of 1.1 KV grade as per PWD specification for electrical Works in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c), mentioned below:- Armored Cable 35.0 Sq.mm 3.5 core

Supply &laying following size' B ' class, medium class G.I. Pipe confirming to IS: 1239 P - 1 (2004) with accessories like bend, socket etc. for laying earth conductor/ strip / cable in ground/ surface/ recess as required. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.80 mm dia.

P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR.

Curtain {Roller blinds black out type with accessories and fixing& installation}.

Providing, supplying, and assembling of 12 mm thick duly toughened glass for partition with open able door including all necessary hardware made of stainless steel, silicone filling as required complete making floor and wall good in all respect as directed by engineer in charge.

Table type 5 (Seating Capacity -8-SEATER, width in mm-1200, Length in mm-2400 mm, Shape of Tabletop Rectangular, Height in mm-750mm) (inclusive all taxes).

Chair type 4 (Chair Type-with Arms, Frame Type-4 Legs, Castors- Without) (inclusive all taxes).

Supply , Installation, Testing and Commissioning of ISO certified company made Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Outdoor unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. Min 5-year OEM warranty both compressor and PCB. NABL accredited as per IS/ISO/IEC 17025 standards / CPRI/ ERDA lab testing reports as per IS 1391(Part-2) 2018 with OEM certificate must submitted to engineer in charge. All as per pre-approved by Engineer in charge. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. non invertor type. 1.8/2.0 TR with 3-star rating of BEE (ISEER not less than 3.7)

Structural steel work rivetted, bolted or welded in built up section, truss and framed work, including cutting and hoisting (Height upto 10 m) fixing and position and applying a priming coat of approved steel primer all complete.

Sofa set (Frame Covering -Fully Upholstered, Total Number of seats in the sofa set (Nos)-4, Covering Material for seat and Backrest-Leatherite) (inclusive all taxes).

Centre Table (Size 3 x 1.5 ft wooden centre table) (inclusive all taxes).

Fridge (Indian Standard latest for Direct cool with ISI marked, Storage volume (Net capacity) (liters)-190, Built in voltage stabilizer-yes, Direct cool method of Defrosting, Power saver compressor, copper coil material, Metallic type of finish).

RO (IS:14724 (latest) for water purification system with ultraviolet disinfection, 2 No’s of float valves/sensors, Electrically operated Reverse Osmosis based water purifier, Input water TDS-1000, Output water capacity(liters/hr)-25, Arsenic & fluoride removal capacity-yes, Thin film composite membrane-Yes, raw water/chemical raw water/chemical cleaning pump-Yes, pre-filter vessel-Yes, No of candles-2, warranty period(for free replacement of machine)-2 years, warranty period( for scope including free of cost candle and activated carbon onside replacement twice a year)-2 years, chloride and fluoride removal facility-yes with pump).

Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 : Ordinary cement without any pigment.

Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 75mm x 15mm x 3.15mm

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: Ordinary rock

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil

Painting on old surface with duco paint (ICI or equivalent) to give an even shade (minimum 4 coats) with preparation of surface by rubbing, primer coats, duco filler putty including polishing etc. complete: On woodwork.

On steel work.

Almirah (Thickness of sides in mm-30mm, Height in mm-1350 Depth in mm-450, Width in mm-760) (inclusive all taxes)

YOKOGAWA INDIA LIMITED

iCAM SYSTEMS LLP

Indexel Engineering Pvt. Ltd.

bips systems ltd