SUPPLY OF MATERIAL TESTING LAB I

MATERIAL TESTING LAB I EQUIPMENTS

Rock well – cum –Brinell Hardness testing machine Rock well – cum –Brinell Tester – Manually operated Major Load : 60,100,150,187.5,250 kgf Minor Load: 10 kgf Max.Test Height : 230mm Depth of Throat: 133mm Machine Dimension (Approx): L-450mm, W-265mm, H-627mm. Testing Table 50mm dia: 1 Testing Table 38mm dia. With ‘V’groove for round jobs 6-45mm dia: 1 Diamond indentor – Rockwell: 1 Steel Ball Indentor 1/16”with 5 spare balls: 1 Steel Ball Indentor 2.5mm with 5 spare balls: 1 Test Block Rockwell ‘C’ : 1 Test Bock Rockwell ‘B’: 1 Test Block HB 2.5/ 187.5 : 1 , Allen Spanners : 5 Screw Drivers: 1, Clamping Device: 1 Dash Pot Oil: 1 Bottle, Wooden Box for Std. Accessories : 1 Telescopic Sleeves for Elevating screw protection: 1 Set Brinell Microscope: 1, Machine Cover: 1 Instruction Manual: 1

Analogue Impact Testing Machine (Izod & Charpy) with standard accessories: Maximum capacity: 300J / 168J Minimum Scale Graduation: 2J Overall Size (Approx.): 1.1m x 0.45m X 1.65m (H) Accessories: Caliper gauge for checking V notch for Izod & Charpy. Templates for checking 10 X 10 mm cross section of Izod / Charpy test specimen. Depth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radius. Izod support for 40 mm dia Izod round specimen. Self centering tong for quick and accurate setting of Charpy test specimen. ‘V’notch milling cutter. ‘U’notch milling cutter.

Deflection Test Apparatus Steel and Wooden beam, Magnetic stand, deflection gauge, Slotted weights, and Weighing Hanger .

Weighing balance-digital 10kg capacity : One gram accuracy Battery backup 8 hours/direct electrical connection.

IS sieve no 9 (90 microns) made of brass 8 inches dia meter.

Vicat needle apparatus (to conduct cement test) (with ISI certification IS 5513) : Complete with following Vicat Mould Glass Base Plate Needle initial setting Needle for final setting Consistency Plunger Mild Steel Base Plate Vicat Mould Split type with Clamping Ring.

Compression testing machine 100 tons capacity: Analogue Compression testing Machine – 100 T Capacity – Electric cum Hand operated consisting Straining Unit Control Panel Power pack Hydraulic control Large dial and a pointer Load indicator system Pendulum Dynamometer Autographic continuous Roll Load – Elongation Recorder Accuracy & Calibration – comply with Grade “A” of BS: 1610 and class 1 of IS 1828. Specification: Maximum capacity : 1000 kN, 1st Measuring Range : 0-1000kN Minimum Graduations: 2kN, 2nd Measuring Range: 0-500 kN Minimum Graduations : 1kN, 3rd Measuring Range: 0-250 kN Minimum Graduations : 0.5kN, 4th Measuring Range: 0-100 kN Minimum Graduations : 0.2kN, Number of division on load measuring dial: 500 Maximum Clearance for compression test at fully descended working piston: 500mm Ram stroke: 100mm, Power: 1.5kW Voltage : 400-440V, 3 Phase

Tile Flexure Testing Machine 200kg capacity: (Ref. standard IS: 654, 1237): The Flexure Strength Testing Machine should be a double lever (Leverage 1:12) loading machine and the load should be supplied by flow of lead shots, which should stop automatically when the sample breaks. Applied load should be at the rate of 450 to 550 N/minute (200kg/minute). Accuracy of load indication should be + 2%. The equipment consists of two bearing rollers and one loading roller.

Permeability Apparatus : BLAINS Air Permeability Apparatus (with ISI certification mark 5516) complete with the following: Permeability Cell U Tube Manometer mounted on a Stand Perforated Metal Disc Plunger Rubber Stopper Rubber Tube 30Cm long Filter paper Discs – 12 nos. Dibutylphthalate Liquid 100ml bottle Punch Non-Perforated Disc Suction Bulb.

ROYAL EQUIPMENTS AND INSTRUMENTS

Vintech Systems

GUJARAT MACHINE TOOLS