Special repair/ renovation of 06 No. ladies Bathrooms, Block-B, Sinchai Bhawan, Sector-5, Panchkula.

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.  For thickness of tiles above 25 mm and up to 40 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.  Nominal Concrete or leaner Mix 1:2:4

Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre:  80 mm internal diameter of pipe

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead.  Of area beyond 3 sq. metres

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as per directions of Engineer-in-charge. Floor Area for 6 Nos of Bathroom : 845.4 Sft Wall Area for 6 Nos of Bathroom : 3190.92 Sft Floor volume for 6 Nos of Bathroom : 845.4 x .33 = 281.95 Cft Wall volume for 6 Nos of Bathroom : 3190.92 x 1 = 3190.92 Cft Total Qty = 3472.87 Cft or 98.28 Cum

20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded:  Horizontal

20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded  Vertical

Providing and laying of base course of floors consisting of 100 mm thick sqm cement 1 :8: 16 and 100 mm sand or stone filling

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level.  1:3:6 (1 Cement : 3 coarse sand (zone-Ill) : 6 graded cum stone aggregate 20 mm nominal size)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.  Size of Tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

P/F 4” long Rimless Single Piece water closet Jaquar make new design/Model

Providing and Fixing of wash basin jaquar make new model

Pillar Cock Auto Closing System with 65mm Extension body

Providing and fixing toilet paper holder : (b) CP brass.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931  15mm nominal bore

Bib Cock Auto Closing System with Built in control cock with wall flange (PRS-043) Jaguar

P&F in position super quality 65mm I/d opening CP brass dome type hinged grating etc.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing/Fixing Toilet Seat connector 4 “

Supply and fixing of Sanitary, water supply fitting (06 Nos Bathroom) Qty for 1 No Bathroom PVC Pipe 4” 6 Kg supreme (20’ length) = 12 x 6

PVC Tee 4” supreme = 02 x 6

PVC P. Trap 4” supreme = 3 x 6

PVC reducing collar 4”x3” supreme = 01 x 6

PVC Pipe 3” = 03 x06

M. Seal = ½ x 6

CPVC Pipe 1 ½” supreme (10’ length) = 03 x06

CPVC Silbond solution ½ Ltr = ½ x 06

CPVC Pipe ¾ “ = 02 x 06

CPVC Brass FTA ¾” x ½” = 03 x06

CPVC Socket ¾” = 01 x 06

PVC Socket 4” = 01 x 06

CPVC Elbow ¾” = 04 x06

Elbow 1 ½ = 04 x 06

CPVC FT Tee ¾” x ½” 01 x 06

FTA Elbow ¾” x ½” 03 x 06

CPVC Plug ½” 06 x 06

Soot Gola 01 x 06

Safeda M.Seal 01 x 06

Ball Wall Brass 1” 01 x 06

15 mm concealed Stop Cock Inner Part 01 x 06

15 mm concealed Stop Cock Inner Part 01 x 06

Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks.  With C.P. Brass 'P" or 'S' Trap

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.  35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 356 4, embossed on the body, door weight up to 35 kg and door width up to 7 00 mm), with necessary accessories and screws etc. complete.

Providing and fixing granite stone in all shades 15mm to 18 mm thick in sqm skirting /dado, risers of steps, pillars and wall facing, laid in any pattern asspecified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.

Electrical Items like LED lights points and wiring including labour (Qty for 6 Nos Bathroom) (Qty for 1 No Bathroom)  Metal Box 8”x6” = 01 x 06

Metal Box 4”x3” = 01 x 06

 Switch Modular (Havells) 5A= 12 x 06

 Socket Modular 5A = 01 x 06

 Regulator Modular 5A =01 x 06

 Wire 1-5mm (Poly Cab) =02 x 06

 Tube Fatti (Modular) =05 x 06

 Fresher Fan 8” Surya =01 x 06

 Fresher Fan 10” (Surya) =01 x 06

Pipe 1” PVC(length) = 01 x 06

 Bend 1” PVC = 10 x 06

 Junction Box = 04 x 06

 Steel Wire =18 x 06

 Modular Plate 8”x6” =01 x 06

 Modular Plate 4”x3” =01 x 06

 Dabbi Cover = 08 x 06

 Tap Roll = 06 x 06

 Croum Screw =24 x 06

Providing & Fixing 5mm Looking (genuine quality) in each bathrooms Size (5x3 Ft)

Extra for grouting the joints of floor/Wall tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.  Size of Tile 600x600 mm