REPAIR TO JOINERY, PLUMBING, SANITARY FITTINGS, TILING, WALL PANELLING AND OTHER MISC WORKSIN ZONE-IV UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Taking down only Chowkatts or frames(without taking off shutter from frames) exc 1.5 sq. m but n exc 4 sq m each. complete all as specified and directed.

Taking down only Chowkatts or frames(without taking off shutter from frames) n exc 1.5 sq. m complete all as specified and directed.

Taking down only shutters of any description complete all as specified and directed.

Material and labour for Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, and directed.

Material and labour for Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, all as specified and directed.

S&F for Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, dcomplete all as specified and directed.

Supply & fix MS work as in door chowkats or frames of angle or other section etc complete conforming to Fe-410-0 or 310-0 complete all as specified & directed.

Material and labour for gauged shutter shall be made out of box section 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide complete all as specified & directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified & directed.

S&F aluminium anodized handle of size 200 mm, ISI marked, complete all as specified & directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified & directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Material and labour for door closer hydraulically regulated cast iron body designation no 3 universal tyoe suitable for door shutter of 851to 1000mm in with and weight between 61 to 80 kg of aluminium (die cast ) body complete all as specified and directed.

Material and labour for floor door stopper fixed in repair complete all as specified and directed.

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing.Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

Material and labour for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified & directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and directed.

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified & directed.

S&F Galvanized MS wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with wooden beading/ screwed into iron frame for securing wire gauge with wire stappler complete all as specified & directed.

S&F in repair 5.5 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading/rubber beaing) as in aluminium windows/doors n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material and labour for repairs to anodised aluminium door and windows shutters and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as spd and directed.

S&F in repair for lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 6mm complete all as specified & directed.

Material & labour for Non skid coloured tiles of size 600x600x7-8mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour for Non skid coloured tile tiles for skirting of size 600x600x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

Material and labour Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:4 including dismantling of old tiles complete all as specified & directed.

All as per item No 33 above but as in skirting/dado complete all as specified & directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified & directed.

Material and labour for 60 mm thick, rubber moulded, interlocking paver block PCC type M-30 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2, 75 mm thick (using 40 mm graded stone aggregate) as in as in sub base of flooring complete all as specified & directed.

Material and labour PCC 1:3:6 type C1 , 75 mm thick (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified & directed.

Material and labour Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint over old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth incl preparation of old painted surfaces complete all as specified & directed.

Material and labour for applying one coat of synthetic enamel paint over old painted steel & iron surfaces of any description not otherwise described over 10 cm width or girth incl preparation of old painted surfaces complete all as specified & directed.

Material and labour Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Material and labour rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:6), complete all as specified & directed.

Material and labour Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Material and labour for preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Material and labour for preparation of new walls and applying two coats of oil bound distemper over finishing the wall surfaces with wall care putty complete all as specified and directed.

Material and labour for Pre-cast cement concrete block Type B1 1:2:4 (20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified & directed.

Supply & fix 50 mm wide rubber beading for doors of required size complete all as specified & directed.

Supply & fix 25mm dia Stainless steel of approved colour & finish fancy type curtain rod including brackets and fancy type end knobs, rings etc complete all as specified & directed.

Material & labour in preparation of old white wash surfaces and applying one coat of white wash on wall surfaces all as specified and directed.

Material and labour preparation of old painted surfaces and applying two coat of cement based paint on walls of any colour complete all as specified and directed.

Material and labour for prepration of old surface applying two coats of exterior emulsion paint ( weather proof) using roller for painting complete all as specified and directed.

Taking out bushes at any height of the bldg and necessary scaffolding digging out roots old brick walls and filling holes with CM 1:3 or PCC 1:2:4 type B-1 and removing of roots/bushes to a distance nexc 50 M and clearing the sites complete all as directed.

S&F as in repair galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified & directed.

Supply & fix in repair mild steel 250 mm, Helical door spring including roller and roller plate for door shutters complete all as specified and directed .

Dismantling ceiling board of insulation boards etc any thickness complete all as specified and directed.

Material & labour for provision of Aluminium anodized frame work(snap grid) suitable for size as in false ceiling of size 600mmx600mm consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.4mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete as per manufcturer"s instructions complete all as specified & directed.

S&F 4 mm thick Gypsum/Everest Board in ceiling size 60cm x 60cm fixed to aluminium snap gird complete as per manufcturer"s instructions complete all as specified & directed.

S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering complete all as specified & directed.

Supply and fix Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Material & labour for 6 mm thick fibre cement corrrugated sheets in repair fixed with' L' or 'J' type or cranked hook bolts as in roof complete all as specified & directed.

S&F Plain, galvanised, mild steel sheeting,of 0.50 mm thickness as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc 275 complete all as specified & directed.

Supply & fix in repairs vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing complete all as specified & directed.

Supply & fix in repairs vitreous china wash down water closet Pedestal pattern white complete all as specified & directed.

Supply & fix in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Supply and fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified & directed.

S&F in repair CP brass jet spray with hand hold arrangement incl long flexible pipe with hook of superior quality all as directed.

S&F in repair CP Hand shower / health faucet fitted in EWC with hand hold arrangement with hook of superior quality complete all as specified and directed.

Supply & fix in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S &F in repairs Bip tap standard of PTMT of 15mm bore and any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified & directed.

Supply & fix in repair 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix in repair 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in reapir Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply & fix in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

S&F in repair aluminium door lock suitable for aluminium doors with bright silver finish to be fitted in aluminium doors complate all as specified and directed.

S & F in reapir Mortise lock suitable for flush doors with handle and closing from both sides with bright finish complete all as specified and directed.

S &F in repair spindel/Die of no 2 3/4" for rectifying leakage of wall/wash hand basin mixer/ sink mixer complete all as specified and directed.

Material and labour for 18 mm thick Multi layer waterproof plywood fixed with screws to timber frame work for cabinet car case both sides covered with o.80mm thick decorative laminates, "Mica" type 1 of surface finished , colour and pattern as approved fixed with approved adhesive as per makers instructions complete all as specified & directed.

S&F in repairs 20" long Telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed complete all as specified and directed.

S&F in repairs 150 mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

B.K.construction

ATHARV CONSTRUCTION

AR Enterprises

A V ENTERPRISES

Tayal Builders

M/S KAPIL ENTERPRISES

SA construction co.