REPAIR TO WALL, FENCING, GATES, DRAINS, DRAIN COVERS,FOOTPATH AND CULVERTS IN AGE B/R-I AREA UNDER GE (N) MAMUN

Amount

Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position incl removal of debris as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

Cleaning of drains having cross sectional area n.exc 0.30 sqm by removing silt, taking out brick bat, pebbles, muds, clay sludge etc from the bottom of drain and culvert bed and removing to a distance not exc 50 m and deposited where directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 80mm thick grade of concrete M-40 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as spd & directed .

M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as spd & directed .

M&L for PCC 1:4:8 Type D-2( using 40 mm garded stone aggregate), as in sub base (75mm thick) to paving complete all as specified and as directed.

M&L 25 mm thick sand filling in floors or paving incl levelling , watering and consolidation complete all as specified and as directed.

M&L Solid Precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in road side kerb stone chamfered on edges, etc all as specified and directed

Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified and as directed.

M&L Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compete all as specified and as directed.

M&L for 12 mm thick Endura tiles( industrial grade )(Square or rectangular) area of each tiles exc 0.08 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over including 15 mm thick screed bed or bedding layer of cement mortar (1:4) incl dismantling old any type of floor tile incl cement mortar bedding and removal of rebris out of premises complete all as specified and as directed.

M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as spd and directed

M&L for Brick work with old servicable bricks received from dismantling straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 complete all as speecified and directed

M & L for cement concrete (1:2:4) type " B1 " (using 20 mm graded stone aggregate) as in coping, kerbs, cills, steps, parapets, haunching and the like rounded or chamfered on edges including necessary form work all as specified and directed

M & L for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed .

M&L Preparation of new plastered surface of external wall surface applying two coat of cement base paint incl curing complete over a of alkali-resistant priming paint complete all as specified & directed.

M&L Preparation of old plastered surface of wall and applying one coat of cement base paint incl curing complete all as specified & directed.

M&L Preparation of old surface and applying one coat of exterior emulsion Ist quality on wall, coping, kerb stone, etc as directed.

M&L Preparation of new cement surface and applying two coat of exterior emulsion Ist quality over a coat of primer on wall coping and kerb stoneas directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in steps, jambs, pillars, window and cills,cooking plateform over and including 10 mm thick rendering in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite and incl dismantling of existing tile of any description complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing removing serviceable tiles to store and rubbish off the premises complete all as spd & directed.

M&L preparation of old steel surface of any description appying one coat of synthetic enamel paint, exc 10 cms in width or girth, including preparation of surfaces, complete all as specified and directed.

M&L Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as spd and directed.

S&F Frame work such as door or gates, covers of angle or other section with gueset plate, rails,braces, MS sheet, round wire, etc, including hooks, hold fast, locking arrangement, hanging arrangement, fastening and fixing complete to similar work conferming to fe-290 Gde E-165 including dismantling existing structure etc complete all as specified and directed

Dismantling of fencing, wire mesh of any type and in any position by unscrewing nuts fillets, clamps complete all as specified and directed.

Dismantling posts or strut (steel or RCC fencing posts) any section and taking out embedded portion (post embedded in concrete) including making good to disturbed ground surfaces complete all as directed.

Supply and fix in repair for galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2.00 mm dia, barbs at 75mm spacings and straining, tightening and fixing to MS nibs embedded in pre-cast RCC fencing post or angle iron post, struts, etc. securing and tying at crossings with and provision of galvanized mild steel wire complete all as specified and as directed. Note: Each line wire to be measured separately.

Supply only 3.15 mm dia, galvanized steel wire chain link fencing 50mm x 50 mm mesh, including binding wire / line wire etc complete all as specified and as directed.

Fixing only 3.15 mm dia, galvanized steel wire chain link fencing 50 mm x 50 mm mesh, fixed to RCC fencing post with bolts etc including fixing of binding wire / line wire etc complete all as specified and directed. Note :- (a) Supply of Galvanized steel wire chain link fecncing, Mild steel round bars, Mild steel flat, Nuts, Bolts & Washers will be measured and paid separately.

Supply and fix mild steel bolts (machine made) with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one nut hexagonal, dia of shank 12mm, length of bolt 50mm to 100mm complete all as specified and as directed.

Supply only 10 mm dia mild steel round bars as in stiffener to chain link fencing including necessary cutting bedding etc. conforming to Grade-I, IS 432-2000 (Part-I) complete all as specified and as directed.

Supply and fix mild steel as in angle , channel or tee section etc, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) and similar work conforming to Fe 410-0 or Fe 310-0 embedded to concrete including tarring to steel work embedded to concrete complete all as specified and as directed.

Deduct Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs 28,285.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum)

malhotra brothers and co

M/S CANTILEVER ENGINEERS

jagdish sons

M/S GAGAN CONSTRUCTION CO

RD Engineers

M/S NARESH KUMAR SHARMA