Loading…
Loading…
Tender Value
₹9.4 Cr
EMD Value
₹6.2 L
Closing Date
14 Jan 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Definition Of Similar Work : - Any Civil Engineering Work.
24 conditions · 4 needing a document upload
Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. Annexure Description 1. Annexure-I(a) Details of the Works Completed by the Tenderer during the last seven years to be filled & submitted as per Annexure-I(a). 2. Annexure-I(b) Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled & submitted in Annexure-I(b). 3 Annexure-II Details of Plants and Machinery with the Tenderer to be filled & submitted as per Annexure- II. 4 Annexure-III Details of Personnel and Organization of the Tenderer to be filled & submitted as per Annexure-III. 5 Annexure-IV Details of Works Presently on hand of the Tenderer to be filled & submitted as per Annexure- IV. 6 Annexure-V Details regarding Association of Railway Officer(s) with the tenderer to be filled & submitted as per Annexure- V. 7 Annexure-VI List of the Arbitration Cases of the Tenderer during last five years to be filled & submitted as per Annexure-VI. 8 Annexure-VII List of the Court Cases of the Tenderer during last Five years to be filled & submitted in Annexure- VII. 9 Annexure- VIII NEFT MANDATE FORM. All Payments to the agency (including the refund of the Bid Security of the unsuccessful bidder preferably) will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure- VIII. 10 Annexure-IX GST COMPLAINT INVOICE : To be filled & submitted as per Annexure-IX. 11 Annexure-X FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS as per Annexure-X. 12. Annexure-X(A)-This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. 13. Annexure-XI LETTER OF CREDIT: To be filled & submitted as per Annexure-XI. 14.Annexure-XII BID SECURITY: Bank Guarantee Bond from any scheduled commercial bank of India to be filled & submitted as per Annexure-XII. 15.Annexure-XIII Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) to be filled & submitted as per Annexure-XIII. 16. Annexure- XIV TENDER FORM (FIRST SHEET)- Tender Form (First Sheet) to be filled & submitted as per Annexure-XIV. 17.Annexure-XV TENDERER'S CREDENTIALS (BID CAPACITY) to be submitted as per Annexure-XV. (This annexure will be applicable, if tender having advertised value more than Rs 20 crore wherein eligibility criteria includes bid capacity)
Annual contractual turnover :- Each Bidder or each member of a JV must fill details of Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) in annexure-XIII form separately and submit the same with the offer followed by the guidelines as mentioned in this annexure. The format of Annexure-XIII ( Ref-Annexure-VIB of GCC-2022) is available in commercial compliance Annexure in documents section of this tender.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT , etc. are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII,IX,XI, XII, XIII, XIV. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Open tender for Provision of S&T maintainer's room & store room at stations in the section of SSE/Sig/Madhupur, SSE/Sig/Jasidih, SSE/Sig/1/Asansol & SSE/Sig/RRI/Asansol .
O-AC-T-127-25-26~ER
O-AC-T-127-25-26
Open
Works - General
12 Months
Paschim Bardhaman, West Bengal
₹0
₹6.2 L
14 Jan 2026
19 Dec 2025
31 Dec 2025
84 items across 2 schedules · ₹36,38,095.95 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | "Supply and fixing PUF Insulated continuous sandwich panels for walls of total thickness not less than 40 mm and width 1.0 Mtrs. Made out from continue line method on automatic plant. Panel shall have 0.35 mm thick pre coated GI sheet on both side of Polyurethane foam confirming to IS 12436:1988.The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS: 277:1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The panels shall be vertically joined together by tongue and groove joints. The Polyurethane foam confirming to IS 12436:1988 And As per PUR 2. The PU Foam shall be self- extinguishing. fire retardant type having minimum density of 40 Kg/Cu.mt. (+,- 2 Kgs) including 0.25 mm thick craft paper edging on both edges. The panels shall be fixed to the steel frame structure with minimum 5 mm thick self tapping GI screws of required length and nos. with minimum spacing of 100 mm c/c. After fixing paneling work all, padel joining fillingby silicon sealant.PUF Insulated wall, Partion wall & Door " | Sqm | 520.00 | 4,159.07 | 21,62,716.4 |
| 2 | Supply and fixing PUF Insulated continuous sandwich panels for Roofs of total thickness not less than 30 mm made out from continue line method. Panel shall have 0.35 mm thick pre coated GI sheet on both side of Polyurethane foam with external face being corrugated in shape for GI and PU foam both material. The crest height of the panel shall be of 35 mm minimum with 250 mm c/c pitch. The Pre coated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of 120 gsm as per IS: 277, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have protective guard film of minimum 25 microns to avoid scratches while transportation. The roof panels are laid over a frame work of trusses, colums and purlins fixed using 90 mm self drilling bolt with rubber washer including all types of flashings. The Polyurethane foam confirming to IS 12436:1988 And As per PUR 2. PU Foam must be self- extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt. (+,- 2 Kgs) including 0.25 mm craft paper edging, self tapping screws required length and nos. etc complete as per structural design and direction of Engineer-in-charge. PUF Insulated Roof | Sqm | 157.00 | 4,346.09 | 6,82,336.13 |
| 3 | "Providing and fixing of Bottom and top U track for closing of end joints for cut PUF panels of size of 52mm x 30mm with 5mm lipping on Both edges. The U track shall be made out of 1mm thick precoated GI sheet. The Precoated sheet shall be of minimum 240mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120gsm as per IS: 277: 1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The U track shall be fixed with suitable POP rivet with wall roof panels and plinth with Expandable fastners with minimum spacing of 450 mm c/c. The Utrack shall be fixed. " | Metre | 163.00 | 676.02 | 1,10,191.26 |
| 4 | "Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm thick precoated Gl sheet. The Precoated sheet shall be of minimum 240mpa steel grade confirming to IS14246:1995 and shall have zinc coating of minimum 120gsm as per IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The ridge shall be fixed to the steel members by pop rivet or self drilling/ self stitchingfastners @ maximum 450mm c/c along length of capping/ flashing etc. complete. " | Metre | 120.00 | 845.89 | 1,01,506.8 |
| 5 | "Providing and fixing of Corner Angle for Various Flashing in 100 mm x 100 mm size in Equal Shape with 5mm edge lipping on both side. The Angle Flashing shall be made out of 0.5 mm thick precoated GI sheet with edge bending of approximate 5 mm. The Precoated sheet shall be of minimum 240 mna steel grade confirming to IS14246:1995 and shall have zinc coating of minimum 120 gsm as per IS: 277: 1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The U track shall be fixed with suitable POP rivet with wall and roof panels with minimum spacing of 450 mm c/c. " | Metre | 120.00 | 840.75 | 1,00,890 |
| 6 | "Providing and fixing of Corner Angle for Various Flashing in 50 mm x 50 mm size in Equal Shape with 5 mm edge lipping on both side. The Angle Flashing shall be made out of 0.5mm thick precoated GI sheet with edge bending of approximate 5mm. The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS14246: 1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transpoliation.The U track shall be fixed with suitable POP rivet with wall and roof panels with minimum spacing of 450 mm c/c. " | Metre | 360.00 | 612.54 | 2,20,514.4 |
| 7 | "Providing and fixing UPVC pipes, supply including all UPVC plain. This includes jointing of pipes & all fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110 mm nominal outer dia Pipes " | Metre | 145.00 | 825.36 | 1,19,677.2 |
| 8 | "Providing and fixing UPVC pipes, supply including all UPVC plain. This includes jointing of pipes & all fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.160 mm nominal outer dia Pipes " | Metre | 91.00 | 1,541.36 | 1,40,263.76 |
| Schedule total | ₹36,38,095.95 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022_2.pdf
ATTACHMENT
Tenderdocuments.pdf
ATTACHMENT
AnnexuresforCommercialcompliances.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
ANNEXURE-X_A_.pdf
ATTACHMENT
Annexure-X_1.pdf
ATTACHMENT
Annexuresoftechnicalcompliancess.pdf
ATTACHMENT
ACSlipsGCC-2022.pdf
ATTACHMENT
JPOTelecomcircular9of2023_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .