REPAIR TO ROAD, BERMS, PATH AND CULVERTS ETC UNDER AGE B/R-I OF GE (WEST) AGRA

Amount

Scarifying or picking gravelled macadam or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 50 mm deep including removing not exc. 50 m and stacking complete all as specified and directed. .

M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregate of grading 2 ( 63 to 40 mm size) or grading 3 (50 to 20 mm size) spread, rolled and consolidated to gradient and camber required using lime stone, sand stone, Flint or quartzite stone ) and well ramming with 8 to 12 tonne roller complete all as specified and directed

M&L for premix bituminous macadam n. exc. 75 mm consolidated thickness or less using binder content 4% by weight of total mix (using paving bitumen VG-30 grade) including cement filler, mix in hot mix plant using design mix and laid and rolled and compacted to required camber and gradient with 8 to 10 tonne power road roller complete all as specified and directed. Note :- (a) Bituminous macadam shall be mixed in hot plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used in lower side, the rate shall be adjusted . however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A'

M & L for repairs to pot holes any depth n exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer (paving bitumen VG-30) @ 5 Kg per 10 Sqm, including material & labour putting a premixed as bituminous macadam with binder content (using bitumen VG-30) @ 4% as specified well rammed and compacted using 8-10 tonne capacity power roller, complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer (paving bitumen VG-30) @ 5 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed

M&L for unsurfaced WBM surfaces by brushing with wire brushes for removig caked / mud etc sweeping with brooms finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with tibuminous primer (paving bitumen VG-10 grade) @ 10 Kg Per 10 Sqm on road surface by mechanical sprayer complete all as specified and directed

M&L for laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A'

M&L for painting centre line, arrow dashes, letters etc on road or pavement with retro reflective thermoplastic road marking paint not less than 2.5 mm thick of approved make applied with machine as per manufacturers instruction including preparation of surfaces complete all as specified and directed.

M&L for applying 2.5 mm (minimum) thick thermo plastic reflective paint for road marking white colour shade in single coat with machine on bituminous / concrete road surface using "HOT MARK" thermo plastic paint (HOT application) including all ingredients such as binder, glass beads titanium dioxide, calcuim carbonate inter filler etc including spraying of glass beads all as per manufacturer's instruction width of painting lines shall be 100 mm as directed at site including properly & completely cleaning the existing bitu minus carpeting surface of road for realignment of road marking paint according to functional necessity for proper traffic movement as per direction of stn authority and as directed by GE. Managing the traffic contral with proper sign board berricates etc will be made as directed according to necessity of site complete. Make Asian most CMS (APCO-BS) or equvialent as approved by GE.

S&F in repair of two way solar blinking Cat Eyes (road stud) of size 125 mm x 125 mm x 25 mm, 6 LEDs with stem fixed with chemical as per manufacturer instruction complete all as specified and directed. Make :- OSCAR (Dark eyes) or equivalent model of specified make as approved by GE.

S&F in repair plastic speed bumb of ABS material speed beaker / rubber rumbler of size L 250 mm x W 350 mm x H 50 mm fixed with metalic bolt of suitable size embedded in epoxy as per manufacturer's instruction complete all as specified and directed. Note:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to install the road stud .

Demolition of cement concrete floor and pavings n. exc. 15 cm thick (below or above GL) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as sub base of floors and pavings complete all as specified and directed.

Material and labour for machine pressed coloured precast concrete interlocking paver block (glossy finished) any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, laid over sand complete all as specified and directed. Note :- Sand shall be measured as supply only in appropriate item"

Supply only sand for sand cushioning under paving tiles, in 50 mm thick layer including spreading and leveling complete all as specified and directed.

AMIT RISHABH BUILDERS PVT LTD

M/s J S & SONS

SINGH ENTERPRISES

Attar Singh and Sons

Gupta Automobiles

M/S OMKAR SINGH YADAV

M/s SCHOLASTIC ENTERPRISES

SHRI RADHAYSHYAM JHA

Shiva Enterprises

N.K. ENTERPRISES