Installation of fire hydrant system at Kanchan Ketki Buildings

Amount

Supplying, fixing, testing and commissioning of double sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat. ISI marked complete with nuts. Bolts. Washers. Gaskets conforming to IS 13095 of 100 mm size with required accessories.

Providing laying testing & commissioning of 'C' class heavy duty GI Pipe conforming to IS 3589/IS 1239 i/c fittings like Welding, elbows, tees , flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on wall/ceiling with suitable clamp/support frame and painting with 2 or more coats of synthenic enamal paint of required shade complete as required of :

100 mm dia.

80 mm dia.

65 mm dia.

Supplying and fixing double headed internal hydrant value with instantaneous Stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type - A) with blank Stainless Steel and chain as required with male coupling 2 nos of the same dia.

SITC of Double door FRP horse box (size 750 Mm X 600mm X 250mm).with 2 nos horse pipe as per ISI standard.

Supplying, fixing, testing and commissioning of butter fly valve of PN1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of 100 mm size

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post officered, conforming to IS884 complete with the following as required .20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gunmetal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gunmetal valve & M.S. Pipe and socket with pipe length of 30 m

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 25 mm

Air Release Value compactable at 25mm dia to be mounted at highest point of pipe with connecting pipes of 25mm.

Wrapping to GI Pipes: With membrane of min 4mm thick including lap joint, applying hot bitumen and sealing the joints with hot sealant butane joints complete as directed and instructed. GI Pipes of all diameters.

Providing and laying in position reinforced cement concrete of specified grade including the cost of centering and shuttering - Work at all level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) - Pedestals, pit edges, podium and enclosure for landscaping plants.

FIRE EXTINGUISHER - ABC Powder Type: Working Temperature °C -30 °C to +60 °C, Burst Pressure 55/80 bar min., 110 bar (actual) approx., Cylinder Testing Pressure 35 bar for 30 sec.Min. Effective Discharge Time 13 sec.IS 15683:2006,Service Pressure 15 bar, Pressure test (Pt) 35 bar (3.5 MPa), TYPE TESTS As per IS 15683

Providing, installation, testing and commissioning of non - return valve of following sizes confirming to IS : 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as 150 mm dia.

OASIS ENGINEERS

Crash fire services