REPAIR AND STRENGTHENING OF ROAD BERM, CULVERTS, FOOTPATHS AND ROAD FURNITURE ETC IN THE AREA OF AGE B/R-I UNDER GE SATWARI

Amount

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) of any description and in any position not otherwise specifically provided and including removing from site to a distance not exceeding 500 mtrs , complete all as specified and as directed.

75 mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base to floors complete, complete all as specified and as directed.

75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base to floor, complete all as specified and as directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ layingof inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed.

Chequered Cement concrete tiles 30cm x 30cm and 25mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey pigment cemen tand pigments and in floors, and cut and polished , over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and as directed.

Pre-cast cement concrete block type B1, 1:2:4 (20 mm graded crushede stone agregate) as in kerb stone set in 1:6 cement mortar,fixed to side of foothpath complete all as specified and as directed.

150 mm bore, PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-0 (using 12. 5 mm graded crushed stone aggregate) in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, roof padding, kerbs not provided for including weathering, slightly rounded or chamfered angles including necessary formwork complete all as specified and as directed.

Preparation of New or previously untreated concrete surfaces of any description over 10cm width or girth and applying two coats of Plastic Emulsion paint over a coat of primer complete all as specified and as directed.

Preparation of old concrete surfaces of any description over 10cm width or girth and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed.

Solar charging road stud (cat eye) made form alluminium alloy shall (100% water proofing design according to 65) of size 125mm X 125 mm X 25mm shank 65mm of high efficiency mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargable battary (1.2V/1600MA) consisting of super bright LED with 10000 to 180000 mcd fixed in repairs complete all as specified and as directed.

Repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Repair speed breaker made of ABS material with two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed to on to the speed breaker of size 750x75x250mm including surface to be make level as parential surfaces including dismantling/taking out of any type rusted/broken speed breaker complete all as specified and as directed.

Delinator having two high performance 100mm dia reflectors and two rectangular reflectors of 70mmx23mm fixed on both sides of guide post made of ABS plastic and fixed on powder coated steel pipe of 1010 mm height (approx weight of 1.76 Kg) including necessary earth work in any type of soil, including necessary block of size 300x300x300 mm of PCC 1:3:6 type C-2 necessary form work etc. fixed in repairs.complete all as specified and as directed.

Supply and installation of CONVEX MIRROR circular of size 1000 mm dia made with ABS Body, Lens/Mirror with unbreakable poly carbonate fixed with clamp with MS pipe 80mm dia and upto 5 feet height and fixed to the ground by PCC 1:2:4 block of size 45x45x60 cm including excavation,removal and curing complete all as specified and as directed.

M/S ANIL MAHAJAN (BID ID -3329359)

M/S SHAKTI STEEL INDUSTRIES (BID ID -3329489)

J P TECHNO (BID ID -3327784)

M/S VED PAUL MAHAJAN (BID ID -3326047)

M/S MANJIT SINGH AND SONS (BID ID -3329768)

M/s Sunny Gupta (BID ID -3328578)

M/S KAMLA CONSTRUCTION CO. (BID ID -3328684)

NARESH KUMAR AND COMPANY (BID ID -3329449)