SPECIAL REPAIRS TO BUILDING NO 88 01TO 08 QTRS ORs SF ACCN AT LAXMI TEK, SPECIAL REPAIRSTO TWIN NISSAN HUT NO 16 AND 17 OF FURNITURE YARD UNDER GE BELGAUM

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing, rubbish off the premises complete all as specified and as directed.

Demolition of Plain cement concrete in ground floors and pavings n. exc. 15cm thick, below or above GL and removing, rubbish off the premises complete all as specified and as directed.

Material and labour for 25mm thick Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Coloured vitrified tiles, square or rectangular, light shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm as in floor/ skirting set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.Note :Make of Tile :HR Johnson/Khajaria/Somany

Material and labour for Premium quality Coloured non skid ceramic tiles, 7mm thick, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.Note :Make of Tile :HR Johnson/Khajaria/Somany

Material and labour for Premium quality Coloured glazed ceramic tile of size 450mm x 300mm x 7 mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with shade of the tile including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.. Note :Make of Tile :HR Johnson/Khajaria/Somany

Taking down chowkhat with shutters (without taking off shutters from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of area exc 1.5 Sqm and n exc 4 Sqm.each and taken as credit complete all as specified and as directed

Taking down shutters of any description n exc 1 sqm each and taken as credit complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and taken as credit complete all as specified and as directed

Material and labour for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position complete all as specified and as directed.

Material and labour for 35 mm thick Factory made second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for 35 mm thick Factory made 2nd class hard wood glazed/ gauged shutter, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed

"Supply and fix Aluminium sliding window (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm including two number provision of 4mm sheet glass for panels, one number powder coated wire mesh of 0.36 mm nominal dia of wire and average width of aperture 1.40mm for panel including provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed . Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iii) Make of frosted glass : Saint gobain/Modi guard/ Gold Fish "

Supply and fix Mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed .

Supply and fix MS butt hinges 100mm in size, medium weight, cold rolled complete all as specified and as directed.(ISI MARKED)

Supply and fix Stainless steel butt hinges 100mm in size, medium weightcomplete all as specified and as directed.(ISI MARKED)

Supply and fix 300mm long Mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete fixed to wooden/ steel chowkats complete all as specified and as directed. (ISI MARKED)

Description all as per item no :20 here in before but fixed in repairs

Supply and fix Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and as directed.Make :Classic/Crown/Adarsh

Description all as per item no :22 here in before but fixed in repairs

Supply and fix Aluminium handle, 'D' type, anodised 150 mm in size complete all as specified and as directed.Make :Classic/Crown/Adarsh

Supply and fix Aluminium handle, 'D' type, anodised 125 mm in size complete all as specified and as directed.Make :Classic/Crown/Adarsh

Supply and fix 300mm long Aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed.Make :Classic/Crown/Adarsh

Description all as per item no :26 here in before but fixed in repairs

Supply and fix in repairs 50mm size cupboard lock, brass, two levers, grade 1 complete all as specified and as directed. (ISI MARKED)

Material and labour for Floor door stopper of brass body and tongue, anodised, with 150mm long cover plate and hard drawn steel spring, fixed in floor as in repairs complete all as specified and as directed. (ISI MARKED)

Description all as per item no :29 here in before but fixed in repairs

Supply and fix Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staple complete all as specified and as directed.

Supply and fix in repairs Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staple complete all as specified and as directed.

Supply and fix in repairs,Harrison rail , mild steel,chromium plated powder curtain rod, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps complete all as specified and as directed.

Material and labour for 18mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs complete all as specified and as directed

Material and labour for 18mm wide x 6mm thick external teak wood lipping around edges of particle board/ plywood including french polishing, fixed in repairs complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 includ demolition of existing precast concrete articles of any description and removal of debris off the premises complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC 1:3:6,type C-1 ,using 20 mm graded stone aggregate as in coping ,bed blocks, eaves filling between wall and tile/sheet roofing as in chowkhat and similar work complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc. complete, all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified and as directed.

"Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately."

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls, cornices, pillasters, etc and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of chalk whiting primer complete all as specified and as directed.

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc,complete all as specified and as directed

Material and labour for Preparation of newly plastered surfaces of walls, cornices, pillasters, etc and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of chalk whiting primer and 1mm thick of wall care putty complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink oxide primer complete all as specified and as directed.

Material and labour for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of stone slab/ tiles, paver blocks of any description and any thickness in floors laid, bedded and pointed in any morta r and serviceable items taken as credit all as specified and directed.

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 75 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed

Material and labour for PCC 1:2:4 (type B-1) , using 20 mm graded aggregate 100 mm thick as in floor including necessary steel form work complete all as specified and as directed.

Material and labour for Chequered cement concrete tile of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and directed.

Material and labour for Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc including necessary steel form work complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping with extra sand etc, complete all as specified and as directed.

Supply and fix 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces complete all as specified and as directed.Note:Make of CPVC Pipe:Ashirwad/Astral(ISI MARKED)

Supply and fix 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces complete all as specified and as directed.Note:Make of CPVC Pipe:Ashirwad/Astral(ISI MARKED)

Supply and fix in repairs 15mm bore bib tap, brass CP, fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Note :Make :SEICO/METRO/ESS ESS

Supply and fix in repairs 15mm bore PTMT bib taps, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe complete all as specified and as directed.Note :Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs 15mm bore stop valve, fancy type, brass chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and as directed.Note Make:SEICO/METRO/ESS ESS

Supply and fix in repairs 15mm bore pillar taps brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for iron pipe for union complete all as specified and as directed..Note Make:SEICO/METRO/ESS ESS

Supply and fix in repair vitreous china oval type wash basin, white, size 550x400mm, with waste pipe and waste fittings including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc complete. all as specified and as directed.

Supply and fixin repairs vitreous china squatting pan, Orissa pattern of size 580 x 440 mm, white, with integral foot rest including 'P' or 'S' trap etc and provision of lime concrete bedding complete all as specified and as directed.

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and as directed.

Supply and fix in repair Stainless steel sink, overall size 495x420mm, bowl size 410x330x160mm, 1mm thick with plug, washers and wastes including bedding in cement mortar, fixing cantilever brackets and connecting union to pipe complete all as specified and as directed. Make: NIRALI/JOYNA/BLUESTAR

Supply and fix in repairs PVC flexible pipe (waste pipe) ,suitable for 32 mm bore waste coupling of sink/wash hand basin complete all as specified and as directed.

Supply and fix in repairs Waste coupling of PTMT with necessary washers ,half or full threated ,minimum weight 45 gms,suitable for 32 mm bore discharge pipes of WHB /Sink complete all as specified and as directed ..Note :Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Brass chromium plated towel rail 600mm long with and including Chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated perforated shower rose swivel type 125mm size suitable for fixing with 15mm bore pipe including 300mm long brass CP shower arm complete all as specified and as directed.

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and as directed...Note :Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Grating doom ,125 mm dia of PTMT(minimum weight : 40 gms) with waste hole complete all as specified and as directed...Note :Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Grating doom ,100 mm dia of PTMT(minimum weight : 25 gms) with waste hole complete all as specified and as directed...Note :Make :Prayag/M/S Shakthi Industries

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) of any description set in cement mortar and removal of debris off the premises complete all as specified and as directed.

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75mm bore UPVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore UPVC (SWR) branch piece, single Y, equal or unequal with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore UPVC (SWR) vent cowl complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Demolition of cement concrete in any description and in any position and removal of debris off the premises complete all as specified and as directed.

Material and labour for Cement concrete in foundations, filling and mass concrete Type E2 1:5:10 using brick aggregate as in sunken floor complete all as specified and as directed.

Material and labour for Applying evenly a coat of blown type bitumen 85/25 grade at the rate of 1.50 kg per square metre and binding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed.

Excavation in post holes each n. exc. 0.5 Cum getting out, in soft/loose soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good the surface complete all as specified and as directed.

Material and labour for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Material and labour for Hard core with broken stone or boulders of gauge n.exc 63mm, deposited, spread, levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

Supply and fix Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix Mild steel work as in roof trusses (framed),,trussed, purlins ,crane gantries, rails and fastenings and heavy bracket frame (Beam, tee,angles,channel or flat sections) including distance pieces ,cleats as in Fe-410 W (Gde-E-250) quality Bcomplete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

"Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings and taken as credit complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embeded in conncrete including taking out embedded portion and making good disturbed ground and sreviceable items taken as credit and removal of debris off the premises complete all as specified and as directed

Dismantling ballies, hard or soft wood, any position, except in posts and struts;including taking out iron straps, bolts and nuts, etc.,if anyand sreviceable items taken as credit and removal of debris off the premises complete all as specified and as directed "

Material and labour for Kota stone slab 20-25mm thick as in landing,riser and tread in steps skirting, dado over 15 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete all as specified and as directed.

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed 15 mm thick in CM 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed "

Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and sreviceable items taken as credit and removal of debris off the premises complete all as specified and as directed

"Demolition of Reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) and scrap iron taken as credit and removal of debris off the premises complete all as specified and as directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and precast concrete articles and removal of debris off the premises complete all as specified and as directed

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 100 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed

Material and labour for PCC 1:2:4 (type B-2) , using 40 mm graded aggregate 50 mm thick as in floor including necessary steel form work complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints,hacking for key ,scrubbing down with water etc and removal of debris off the premises complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for Preparing newly plastered wall surfaces and applying with Acrylic Smooth exterior paint of required shade : New work Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on old wall surfaces and applying with Premium Acrylic Smooth exterior paint required shade: New work Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on walls and applying two coats of white wash on wall including necessary preparation of surfaces complete all as specified and as directed.

Material and labour for Preparation of old painted steel surface of any description and applying one coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Material and labour for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed..

Supply and fix Mild steel TMT bars of FE 550 D 6 to 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Description all as per item no :113 here in before but Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders

Material and labour for RCC 1:11/2:3 ,Nominal mix ( using 20mm graded stone aggregate)as in chajja /slab complete all as specified and as directed.

Material and labour for RCC 1:11/2:3 ( using 20mm graded stone aggregate)as in beams, cantilever and lintels over 1.5 m span etc or similar itemscomplete all as specified and as directed.

Material and labour for Use and waste of form work for Chullah hoods,Chajjas,troughs and similar item includind edges etc.complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surfac to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Material and labour for Precast concrete block masnory withPCC 1:3:6 type C1 using 20 mm graded aggregate with solid block exc 10cm in width and set in CM 1:6.complete all as specified and as directed.

Material and labour for 38 X 3 mm glass dividng strips in floors .complete all as specified and as directed.

Supply and fix Aluminium sliding windows (double track), fabricated to required size with powder coated aluminium sections, with bottom track size 92 x31.75 x1.6 mm, side & top frame size 92 x 31.75 x 1.4 mm, top and bottom shutter rail of size 39 x17 x1.4 mm, outer style of size 39 x 17 x1.4 mm, interlock style of size 39 x27 x1.4 mm, including provision of 5mm sheeet glass ordinary quality including provision of all hardware fittings such as handles, locking arrangeemnts, rubber gasketss, rollers, spring catchers etc. complete all as specified and directed. Note :(i) Each window shall be provided with 2 glazed shutter (ii) Thickness of Powder coating shall be of 50 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iii) Make of sheet glass : Saint gobain/Modi guard/ Gold Fish "

Dismantling of old unserviceable submain wiring of aluminium conductor cable of sizes 2.5 & 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable drawn through and including PVC casing and capping medium grade of suitable size ISI MARKED with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular metal box fixing in wall with white colour cover plates and all accessories for mounting modular type switches, sockets, fan regulators, bell pushes etc. for One light point controlled by one switch 1 way and taking down unserviceable point wiring from existing surfaces and taken as credit complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 123 here in before but for one bell point controlled by one bell push.

All as described in item No. 123 here in before but for one ceiling fan controlled by one switch and regulator

All as described in item No. 123 here in before but for one exhaust fan point controlled by one switch

All as described in item No. 123 here in before but for one light point controlled by two 2 way switches.

All as described in item No.123 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No.123 here in before but for one 3 pin socket outlet , 5 amps on the same board with other switches .

All as per item No 123 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core through PVC casing capping medium grade of size 25/20 mm, etc fixed on wall/ceiling of suitable size and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix in repairs Modular switch 1 way 6 Amps 1 module 230 Volts AC complete all as specified and directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular switch 2 way 6 Amps 1 module 230 Volts AC complete all as specified and directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Call bell ding dong AC 230 V, AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells)

Supply and fix in repairs Electronic type fan regulator 230 V , 120 watt step type, socket type,complete all as specified and as directed . Make : Anchor/Legrand/Rider

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through and including PVC casing and capping medium grade of size 20/25 mm with all necessary fitttings and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Supply and fix inverter type LED INTEGRATED BATTEN tube light fitting type 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted FRLS PVC flexible copper conductor cable with suitable size complete all as specified and directed. Note : Make :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO20 OR equivalent in Bajaj/CG/Philips

Supply and fix inverter type LED INTEGRATED BATTEN tube light fitting type 10 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted FRLS PVC flexible copper conductor cable with suitable size complete all as specified and directed. Note : Make :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO10 OR equivalent in Bajaj/CG/Philips

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 5 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted FRLS PVC flexible copper conductor cable with suitable size complete all as specified and as directed. Note : Make :Havells Cat part no : LED PRIDE PLUS NEO BATTEN 5 W 6500 KOR equivalent in Bajaj/CG/Philips

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Note : Make :Havells Cat part no : ENDURASUNDOWNSL25WLED765PASYBOPCIHDOR equivalent in Bajaj/CG/Philips

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted FRLS PVC flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent in CG/ Philips/ Wipro

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm from ceiling rose to connector of exhaust fan complete all as specified and as directed . Note : Make:-Almonard /Crompton/Orient

Taking down existing MCB DB alongwith MCBs with old wooden boards and making good to disturbed surfaces and taken as credit complete all as specified and as directed .

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :Indo Asian/L&T/Siemen

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make - L&T / Siemen/Indo Asian .

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings complete all as specified & directed.Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed ..Note :Make :Indo Asian/L&T/Siemen

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Taking down existing unserviceable energy meters,dismantling and removing and refixing with suitable arrangement i.e on 2nd hard wood sunmica board for metering purpose complete all as specified and directed

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 35 Sqmm, 3.5 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for laying of pipe line,cables etc and getting out in any type of soil complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil.

Removing of excavated material/surplus soil n exc 50m & depositing where directed at a level n exc 1.5m above the starting point for any type of soils.

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 4.00 Sq mm drawn through and including PVC casing and capping medium grade of size 20/25 mm with all necessary fitttings and Provn of one run of 4.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 4.00sqmm and one run of 4.00 sqmm and one run of PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Supply and fix LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted FRLS PVC flexible copper conductor cable with suitable size complete all as specified and directed . Note : Make :Havells Cat part no : LUMILINEBS18WLED830SPCWH OR equivalent in Bajaj/CG/Philips

Supply and fix Factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make - L&T / Indo Asian/Siemen .

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 16 Sqmm, 4.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Taking up or down steel tubing of size upto 40/25 mm bore and connections and taken as credit completeall as specified and as directed.

Supply and fix 40 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.Note:Make of CPVC Pipe:Ashirwad/Astral(ISI MARKED)

Supply and fix 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.Note:Make of CPVC Pipe:Ashirwad/Astral(ISI MARKED)

Supply and fix 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.Note:Make of CPVC Pipe:Ashirwad/Astral(ISI MARKED)

Material and labour for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete including demolition/taking down of the existing RCC/PVC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully complete all as specified and as directed.Note Make of Water tank :Sintex/Polycon/Infra(ISI MARKED)

Supply and fix 25 mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.Note Make :Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Note : Make :Leader/Kartar/Zoloto

Supply and fix 40 mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed ..Note : Make :Leader/Kartar/Zoloto

Material and labour for Construction of valve chamber of internal size 900 x 900 x 960mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc,complete all as specified and as directed

M/s. N D KALING

M/S JAYDEEP CONSTRUCTION

ASHOK M RAJGOLKAR

M/s B C CHOUGULE

DHANSHRI ENTERPRISES