PROVN OF PREFAB OR SHELTER AT POHRUPET IN THE AOR OF GE 874 EWS

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out any type of soil complete all as specified and directed.

Removing excavated material to a distance exc. 250mtr but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in including spreading levelling watering & well Ramming in layers n. exc 25 cm thick complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with Sub Class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in well /septic tank /soakage well complete all as specified and directed.

M&L for 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+/- 2 kg/cum) the panel shall be precoated coated as approved by GE complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde E- 250) quality complete all as specified and directed.

M&L for plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for preparation of newly surfaces of steel over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for rendering 15mm thick plaster on external face of wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer including preparation of newly plaster surface complete all as specified and directed.

M&L for rendering 10mm thick plaster on internal face of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 6 mm thick Plywood, grade BWR type BB, fixed with screws to timber frame work complete all as specified and directed.

S&F for plain fillets of exc. 3 & n exc. 6 Sqcm, square, rectangular or triangular in section, clean swan, secured with nails complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 in 100 mm thick as in sub base of floor complete all as specified and directed.

Material and labour for PCC (1:2:4), type B-1 40mm thick as in levelling in floor complete all as specified and directed.

Supply and fix Vitrified Ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 thick screed mortar in CM 1:6 complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and directed.

S&F anodised aluminium powder coating door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, rubber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminhun snap beading, screws etc. complete all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L for door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F but hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed100mm complete all as specified and directed.

M&L for Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.

M&L for Aluminium handles, cast type, anodised 150mm complete all as specified and directed.

S&F floor door stoper Aluminium 140 mm long complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to FE-410-s or FE 410-0 complete all as specified and directed.

All as per item No-34 above but 6 to 8 mm dia bars as in stirrups/ spacers.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 12.5mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 38 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 38 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 38 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. .

S & F Switch socket combination 2 in 1, 3 pin, 5- and 15-Amp flush type universal type complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F 09W/10W Bulk head luminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

M&L for wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed.

Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories 20 litre capacity, 230 volts, 50 hz Refrigerant type R134a, complete all as specified and as directed.

S & F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and directed.

Supply & laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes 16 sqmm 2.0 core

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.

Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable protection of size 40 mm dia bore complete all as specified and directed. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3130922)

M/S AB AHAD RATHER (BID ID -3132685)

m/s mohd saleem and co (BID ID -3132214)

M/S MIR BUILDERS (BID ID -3129373)

Bidder Name

M/S AB AHAD RATHER

M/S MIR BUILDERS

M/s Sajad Hussain Wani

M/S MUNEER AHMAD WANI CONSTRUCTIONS

m/s mohd saleem and co