SPECIAL REPAIR TO BLDG No. 88 (JCOs LIVING ACCN) AT NASIRABAD

Amount

Taking down cement or cement lime plaster on stone/brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specfied and directed.

M&L for Keyed pointing with CM 1:3 to random or polygonal rubble, uncoursed or brought upto course masonry, complete all as specified and directed.

M& L for 15 mm thick rendering in cement mortar 1:6 on stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed

M&L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces,finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed

M & L for preparation of new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer, complete all as specified and directed.

M & L for complete removal of existing treatment and preparation of wall surfaces and applying two coats of oil bound distemper over a coat of primer over 1 mm thick wall care of putty, complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed.

M & L for 20mm thick black granite on kitchen platform and similar work (size not less than 900 x 450mm) over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for PCC 1:2:4, type B-1 (using 20mm crushed stone agg.) as in rounded or chamfered on edges in any description complete all as specified & directed.

M & L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sq m per coat and applying plythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.

Supply only water proofing compound ISI Marked complete all as specified and directed.

M & L for PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over and including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L for ceramic coloured tiles matt finish 400 x 400 x 7mm thick coloured/ Jointless tiles in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15mm thick in CM (1:6) laid over and including 25mm thick, PCC (1:2:4) type B-0 using 12.5 graded stone aggregate complete all as speciied and directed.

M&L for ceramic coloured tiles matt finish 400 x 400 x 7mm thick coloured/ Jointless tiles in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bedding layer 15mm thick in CM (1:6), complete, all as speciied and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M & L for brickwork with subclass `B` fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

S & F in repair 150 mm overhead shower with Arm Flange for fixing with 15mm pipe complete all as specified and directed.

S & F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete, all as directed..

Taking down old unserviceable WHB and S&F new wash hand basin vitreous china white / ivory colour flat size 550 x 400mm fixed including waste coupling, waste pipe complete all as specified and directed

S&F in repairs PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity, white with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S & F in repairs PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified & directed.

S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.

S&F in repairs Chromium plated concealed stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as specified & directed

S&F in repairs Chromium plated Angle stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as specified & directed

S&F for chromium plated centre hole basin mixer w/o pop up of 15mm bore complete all as specified and directed by Engineer-in-Charge (Cat No- 8750 of Prayag of from equivalent specified make as approved by GE)

S&F in repairs chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 1145 mm x 510 mm with bowl size 560mm x 410mm x200 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink.

Taking down old wooden plate rack and S&F stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed..

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per description of ser item No. 44 above but 20 mm bore pipe.

All as per description of ser item No. 44 above but 25 mm bore pipe.

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per description of ser item No. 47 above but 20 mm bore pipe.

All as per description of ser item No. 48 above but 25 mm bore pipe.

S&F CI Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as in repairs.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3), complete, all as specified & directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each aand removing from site and making good disturbed surface of walls in cement mortar (1:3), complete, all as specified & directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing complete, all as specified and directed

S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.

S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Two/Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S & F r 2nd class HW 35 mm thick, gauged and skeleton shutters (Three Panels), factory made open rebated and prepare to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

S & F in repairs window ECO 4000 of double rebate openable / fixed window made of galvanised steel colour coated / powder coated ( base steel a per IS 513 of D Quality galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick coated with alkyed backer 5-7 micron thick or powder coated with pure polyster upto 50-60 micro thick . Outer frame section 72x55 mm , centre mullion section , 72x50 mm , shutter section 47x20 mm fly mesh section 40x20 mm, fixed glass beading section 12x12 mm , outer frame and mulions shall consist rebate for glazed shutter , fly mesh and 20 provision for gaurd bars/ grills the section cut to length mitre joined with corner bracket centre mulions fixed with mulions cap , stay , handle , latch , 2 Nos of heavy duty stainless steel pivot with hinges per shutter and panelled with 5 mm thick plain float glass and S S mesh for fly mesh shutter ( 304 grade) fitted using EPDM (Enthy propyelene diamine monomer ) gasket including fixing fixing windows in the concrete / masonary wall by means of shelf expanding screw including 10 mm square bars welded to 6x12 mmlat at a disance 150 mm C/C (Pitch) etc complete as per direction of Engr-In-Charge. Make - NCL Alltek and seccolar Ltd or equivalent as approved by the GE.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

M&L for 18/19mm thick block board grade-II quality, interior grade with decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed.

M&L for IInd class hard wood plain , solid , straight chowkats and frames sec area n exe 40 Sqcm complete and all as specified.

S & F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed.

S & F 75mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed.

S & F 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed.

S & F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F extruded aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified & directed.

M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as spd & directed.

S&F 3.00 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as specified & directed.

S&F in repair fancy type 20mm dia aluminium curtain rods powder coated fixed to bracket completed all as specified & directed.

S&F decorative type knobs with bracket of MS powder coated fixing at end of pelmet rod complete all as specified & directed.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n. exc 500trs capacity each complete all as specified and directed

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified in SSR Part-I.

S&F ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm)

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as specified & directed.

M&L for 40 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank and 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm stone crushed agg.) finished concrete surfaces even & smooth complete all as specified and directed

Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.

M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface, finished fair & even without using extra cement, complete all as specified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using belown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

M&L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M&L for coved fillet in PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed

Demolition of cement concrete (unreinforced) in any position & of any description not otherwise specifically provided for complete all as specified.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, including removal to store complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

S & F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft /loose soil all as spd & directed.

M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

Supply only mild steel galvanized chain link fencing 3 mm dia of mesh wire, mesh size 75x75 mm complete all as specified and as directed. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for separately.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provn of binding wire.

Supply and fixing for 3.00 mm dia galvanised medium coated as per IS 4826 steel wire as required for fixing chain link fencing etc all as specified and dir.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long and dia of neck 5 to 10 mm complete all as specified.

M&L for preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete, all as specified and directed.

M&L for cement concrete1:2:4 type B1 (20mm graded crushed stone aggregates) as in coping, bedding . complete all as specified and directed ..

M&L for Brick work with sub class B bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4, all as specified and directed..

M&L for 10mm thick rendering on brick/ concrete surfacesin CM 1:4 finish smooth and even without using extra cement complete all as specified and directed.

Surface excavation n exc 30 cm deep and averageing 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in any type of soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in hard/dense soil, complete all as specified

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/disintegrated rock, complete all as specified

M & L for concrete bed to drain pipes of 150mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all as specified and as directed by the Engineer-in-Charge

M & L for Reinforced concrete pipes, class NP3, 150 mm bore laid and jointed complete with collar and as directed by Engr-in-charge.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4, finished even and smooth without using extra cement, complete, all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

Add or deduct to item No. 115 above for each 25mm girth or part over or under 30cm

M & L for 50 mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M & L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in surface channels and drains & coping, edging rounded or chamfered type etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for construction of soakage wells excavation, in ordinary Soil, foundation in PCC 1:3:6, walls of noney combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM 1:4, RCC cover slab in M-25 Nominal mix, filling with brick bats, complete of size 1.8 M dia X 3.0 M deep., etc complete, all as specified in TD drawing No- CEBZ/TD/78/2011, Sheet 1&2 and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:- Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

One light point/bell point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket but on independent board.

One light point controlled by two, two way switch.

All as per item No. 123 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor. Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F switch piano flush type 15 Amps, single pole one way 240 volts complete all as speciied and directed by Engr-in-Charge.MAKE:-Havells/Anchor/Legrand

S&F switch piano flush type 5 Amps, single pole, two way, 240 volts complete all as speciied and directed by Engr-in-Charge.MAKE:-Havells/Anchor/Legrand

S&F bell push, piano flush type 5 Amps, single pole, 240 volts complete all as speciied and directed by Engr-in-Charge.MAKE:-Havells/Anchor/Legrand

S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as speciied and directed by engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F ceiling fan regulator electronic flush , steped type (four step) 230 Volts AC complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by Engr-in-Charge .MAKE:-Havells/Anchor/Legrand

S&F door bell, ding dong type, electric 240 volts AC, single phase, complete all as speciied and directed by Engr-in-Charge.MAKE:-Havells/Anchor/Legrand

S&F of lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F LED tube light fitting box type in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as speciied and directed by Engr-in-Charge. Make Havells Cat part No REGALBATTENT5UPTO1X18WDSBSWH (for batten) PHOTONULTRA2.013T8SSTL18WLED 865SPC (for tube) or equivalent model from Philips/Crompton/Bajaj

S & F Wall mounted decorative luminarie fitting suitable up to 10 watt LED lamp B-22 base, complete all as specified and directed by Engr-in-Charge. Make: Havell cat part No .LHDL02160099 or equivalent from Bajaj/Surya/Philips.

Supply and fixing LED lamp, 10 watt suitable for 230 volts , 50 Hzs, B-22 base complete all as specified and directed. Make: Havells/ Bajaj/Surya/Philips

S&F LED bulk head luminaire 13.5 W LED 6000 k complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No LHEXCGP7UN5W013 equivalent model of Philips/Bajaj/Crompton

S&F LED mirror light fitting 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories pre-wired and including connecting flexible copper conductor cable with suitable size. Make: Havells/Bajaj/Osram

Supply, fixing, testing and commissioning energy saving street light luminaire 35 watt LED , aluminium pressure die cast housing with tughened glass cover with individual LED lence , IP 66 protection complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model from Surya/Control& Switchgear/Bajaj

Taking down existing ceiling fan , dismantling blades and refixing after cleaning including conecting up with three core flexible cable from ceiling rose to fan.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S&F MCB distribution board triple pole & neutral with 200 Amps rated bus bar with shrouds, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 4 way, 415 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S & F of MCB SP, 240 volt, 3 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. . Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB TPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unseviceable existing earthing .

Supply and fixing street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of suitable size of clamp , nut and bolts complete all as specified and directed.

Supply and, laying, including jointing, testing or fixing or passing through pipe, trench or duct, commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 Volt grade size 35 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge. Make Polycab/Asian/Gloster/Finolex

S&F steel tubing 40 mm bore, galvanised, light grade with all fitting laid in trenches. Make: Tata/Jindal/Swastik

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.

Supply and laying of bricks of old class ‘B’ as protection cover to UG cable, laid flat adjoining to each other width wise, complete, all as specified.

M/S Bansal Construction

MITTAL ENTERPRISES

M/S SHIVA TRADERS

M/S SUMAN ENTERPRISES

M/s SUNIL ENTERPRISES

New Tech Projects India

H M LAXMINARAIN

M/s Jai Jinendra Constructions

kirtiman traders

V K LAKWAL CONSTRUCTION