NIQ No.33_1/WBTDCL OF 2025-26 (Technical)

TOTAL QUOTED AMOUNT

BoQ_Ver3.0

12 W LED Downleighter Philips make CROM LED15# LCDD-12-CDL/WW or equivalnet as per details above or equivalent Philips make. with minimum 2 years warranty

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

MS CEILING

Providing and fixing of false ceiling with powder coated exposed MS suspension system false ceiling Main section 72x72mm SHS with cross section 50x50mm as per design with 1.2mm ms plate CNC cutting as per design with powder coated as per colour, with ms 40x40mm SHS section 10mm thick fastener fixed to the ceiling. s per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete)

BAR COUNTER

Providing and fixing Bar Counter, at two levels, upper level finished at lvl.+1100, lower level finished at lvl. +900, counter top to be made of 19mm ply, top surface finished with 16mm jet black granite, counter to be made of 19mm ply of Century/Green or equivalent make, outside to be adhesive pasted with Vveneer of approved colour and make with led rope light (as specified in drawing and/or as directed at site), inside to be finished with 0.8mm laminate of approved colour and make, complete with necessary hardware fittings & fixtures, with 60mm dia. S.S.306 bar as footrail. (Base cost of veneer = Rs 120/- per sqft, Base cost of inside laminate = Rs 40/- per sqft., Base cost of granite : Rs.180/Sq.ft.). (Measurement to be given as per outer elevation)

BAR BACK COUNTER

Providing and fixing Bar Back Counter, at finished at lvl. +900, counter top to be made of 19mm ply, top surface finished with 16mm jet black granite, counter to be made of 19mm ply of Century/Green or equivalent make, outside to be adhesive pasted with Vveneer of approved colour and make with led rope light (as specified in drawing and/or as directed at site), inside to be finished with 0.8mm laminate of approved colour and make, complete with necessary hardware fittings & fixtures, with 60mm dia. S.S.306 bar as footrail. (Base cost of veneer = Rs 120/- per sqft, Base cost of inside laminate = Rs 40/- per sqft., Base cost of granite : Rs.180/Sq.ft.). (Measurement to be given as per outer elevation)

BAR DISPLAY UNIT

Providing and fixing counter display unit as per design and Approved Drawing , made on 19mm thick water proof ISI

mark plywood structure and top layer od 4.0mm thisk veneer finished with malamine polish , rack finished with back 5.0mm mirror , all exposed inner surface will be finished with polish as per approved shade, the job is to complete with all necessary hardwers , as per approved drawing and as directed by Engineer-in-charge. Approx Size 3.00 mitter x 2.1 mitter height .

TABLE TYPE 1

TABLE TYPE 2

SOFA TWO SEATER

WOODEN CHAIR

BAR TOOLS

ROLLER BLINDS

Providing & fixing premium quality Roller blinds with Solar protection of high tenacity Polyster Yarn with PVC coating & Aluminium Backing and fungistatic treatment and should block the light flux & offer elimination of glare and sunlight /radiance. Fabric shall have visible light & solar properties & greengaurd (gold) Indoor Air quality. Fabric composition - 39% Polyster / 61% PVC with alumium backing. Weight - 290 g/sq.m (+/- 5%) Thickness - 0.32 otin (+/- 5%) Fabric openess factor - 3°ñ Tensile strength (warp / weft) -160/170 daN/5cm Tearing Strength (warp/weft) -11/13 daN Backing - Aluminium backing. Fungistatic treatment - Degree O Excellent (EN ISO 846-A) Fire retardancy: B-s2,d0/EN 13501-1, class A/ASTM E84.

WALL PAPER

Providing and fixing wall paper / Graphic for highlighting the walls with proper adhesive in line level for reception, conference & Auditorium rooms and whwereever required as per the drawings. Basic rate of Wall paper is Rs..100/- per Sft. Make - D'decor / Nilaya By Asian Paints or equivalent.

INTERNAL WIRING :

Providing and Macking of point wiring in concealed in walls, furniture's & for above false ceiling, or on ceiling, on beams shall be fixed with metal saddles & metal spacers etc., with conduits taken in slab with 20 mm dia PVC Rigid conduits 1.5 mm thick ISI mark with 2 nos. of 1.0 sq. mm. & 1 nos. of 1.0 sq. mm. with modular switch with company made flush metal box/surface PVC box etc. comp. with nec. main lines for switch board from LDB of mains of 2 nos. of 2.5 sq.mm wire and 1 no.of 1.50 sqmm pvc Insulated copper conductor wire laying in with 20 mm/25 mm dia PVC rigid conduits 1.5 mm thick ISI mark .3 point cieling rose need to be provided for each points.These will be used with point wiring of light, fan, ex. fan, callbell points, etc { Max. 3 Switchboards in one circuit - One Sp MCB }

SITC of 6/16 Amp. Switch and socket complete with necessory require wiring from PDB of 2 no of 4.0 sqmm wires and 1 no of 2.5 sqmm PVC Insulated copper conductor wire laying in with 20 mm/25 mm dia PVC rigid conduits 1.5 mm thick ISI mark. These will be used with point wiring of power points ,etc

SITC (For SPLIT AC 1.5TR unit -OUTDOOR SUPPLY) of 2 no of 4.0 sqmm wires and 1 no of 2.5 sqmm PVC Insulated copper conductor wire laying in with 20 mm/25 mm dia PVC rigid conduits 1.5 mm thick ISI mark from indoor unit to outdoor unit if required.

Supply, installing, testing and commissioning of metallic double door type distribution board with all necessary connection complete to be installed concealed in wall / surface mount complete to the satisfaction of the Engineer in charge. The DB should be of same make as MCB make. Vertical Type for cable connections

Supply and installing telephone point with Telephine socket outlets of RJ 11 of aapproved make with company made concealed boxes in walls / furniture's etc. complete with Providing, installing, testing, commissioning of 2 pair of 0.51 cross section pvc insulated copper conductor telephone wire of ITI approved with 20/25 dia. PVC conduits with accessories duly burried under floor with necessary chasing / breaking in floor and to be refinished with all necessary civil material etc. or to be cleated on wall / ceiling with saddles / spacer etc. necessary termination etc. complete.from kroone box to table tele. points, etc. complete.

Supply, installation, testing and commissioning of CAT 6, RJ 45 information outlet (I/O) of D-link mke with front modular cover plate, flush box metallic or PVC for trucking system etc. complete with terminations etc complet with Providing, installing, testing, commissioning of CAT 6 UTP pvc insulated copper conductor data cable of D-link make with 20/25 dia. PVC conduits with accessories duly burried under floor with necessary chasing / breaking in floor and to be refinished with all necessary civil material etc. or to be cleated on wall / ceiling with saddles / spacer etc. necessary termination etc. with ferrule numbering at both ends of each of piece of cable etc. complete as per the requirement from metal rack to table I / O points complete.

LIGHTING FIXTURES :

Supply and fixing of Hanging Light Fixture for Table top as per approved drawing and as directed by Engineer-in-charge

Supply of wall mounted 3star hi-wall split type inverter Air Conditioner 1.5 T capacity friendly energy efficient gas, refrizarent Including of copper pipe, drain pipe, cu connection cable upto 10ft including also plug top. Make- O-General/ Mitshubishi or Equivalent as per choice of EIC)

Supply and fixing of Hanging decorative Light Fixture for Bar counter top as per approved drawing and as directed by Engineer-in-charge

BoQ_Ver3.0

12 W LED Downleighter Philips make CROM LED15# LCDD-12-CDL/WW or equivalnet as per details above or equivalent Philips make. with minimum 2 years warranty

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In 1st floor

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. ground floor

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface ]

(ii) With 1:4 cement mortar (a) 10 mm thick plaster

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (b) ln Ground FIoor:(size not Iess than 800mmX 800 mm X 10.2 mm thick)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall; With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In ground floor

(b) Area of each Granite slab above 1.00 Square meter.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat ii) Solvent based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality

Providing and fixing of Factory-made uPVC Sliding window’ (White Colour) complete, (U value= l.9-I .3 W/m 2 K, flame resistant, self-extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm {=0.2 mm) duly reinforced with G.I. section I .6 mm (+0.2 mm), wherever required. All corners of Frame end sash will be fashion welded. After placing 5 mm Clear Annealed glass in the sash. uPVC glazing bead, interlock. EPDM gasket, brush shall be provided including touch lock and Wolters & proper drainage system shall he provided. Windows frame will be fixed to the wall with l00mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer& window Manufacturer must be one & same, only manufacturer Warranty is acceptable) c) 3 Track with Mesh-2 G lass Sash + 1 Mesh Sash (Each sash shall be half of width of window) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 + 0.2 mm

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor. Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to IS: 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in (a) 35mm thick shutters (single leaf) 1st floor

Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws. (f) 125mm. X 125mm. X 27mm. X 2.50mm.

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in- Charge fitted and fixed complete including all incidental charges.

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

(i) Door stopper.(Brass)

ii) Godrej Hydraulic door closer fitted and fixed complete

(a) Heavy type

French polishing to wood work including preparing surface (ordinary gloss) a) On new wood work. NOTE : For high gloss polish the rate shall be increased by 50% over the rate for ordinary gloss. This work should not be executed without specific permission of Superintending Engineer.

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In 1st floor

Sub Total

Add GST @18% .

Sub Total

Add labour welfare Cass @ 1%