Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹50.3 L+₹54,635.20 (1.10%)Rejected-Finance C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTATIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹54.9 L+₹5.1 L (10.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹55.4 L+₹5.7 L (11.4%)Rejected-Finance ANANDAPALLY WARD NO VII P O P S MAL DIST JALPAIGURI PIN 735221 WB | MAL | JALPAIGURI | WB | 735221 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹55.9 L+₹6.2 L (12.5%)Rejected-Finance TELEPARA HATKHOLA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
REPAIR REPLACEMENT OF JOINERY AT ZONE A AND B BAGRAKOTE STN UNDER GE SEVOKE ROAD
2022_MES_571885_1
GE/SEV/67 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹96,000
Yes
8 Feb 2023
29 Dec 2022
23 Jan 2023
29 Dec 2022
21 Jan 2023
14 Jan 2023
30 Dec 2022 - 7 Jan 2023
Amount
Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bar complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.
S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified .
S&F pressed steel frames (size-105X60mm) for doors with one or more rebate incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No.6 above, but without glazing bars complete all as specified and directed.
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified and directed.
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.
S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing all as specified and directed.
S & F flush sutters, 30mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.
S&F factory made 2nd class hardwood rail and style 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) complete all as specified
S&F Factory made solid panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S & F Floor door stopper with overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed
S&F aluminium anodised barrel tower bolts of extruded section, 200mm long, complete all as specified and directed.
S&F 300 mm long aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.
S&F aluminium anodised handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples complete all as specified and directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for preparation of new or untreated wood and wood base material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete as specified and directed.
S&F Powder Coated (minimum thickness of powder coating 50 micron) Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Powder Coated (minimum thickness of powder coating 50 micron) Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per requirement and direction of Engineerin-charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per and the directions of Engineer-in-charge.
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
Supply only 4mm thick sheet glass ordinary quality not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repair aluminium (Extruded section body) door closer hydraulically regulated , designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium body complete all as specified and as directed.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directd
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.
Hacking out broke glass (any thickeness and size) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones all directed by Engr in charge.
Dismantling AC (corrugated, semi corrugated etc as in roof covering complete all as specified and as directed
S&F 100mm long but hinges mild steel medium weight cold rolles etc complete all as specified and as directed
S&F plain, Aluminium sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed ) 0.56 mm thickness as in fixing for door bottoms complete all as specified and as directed
M/s. STRUCTURES INDIA
B K SINGH
BIJOY DEY
M/S MAJUMDER CONSTRUCTION
M/S Bikash Saha
RAJIV DEY SARKER
M/S HARMANS
SHRI MANOIRANJAN BISWAS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .