Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
18 Feb 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
20 conditions · 8 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS:The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less as per advance correction slip No.1 to IRSGCC 2022 where, V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value upto Rs. 50 lakhs. For tenders costing more than Rs. 20 crore, eligibility criteria include bidcapacity also as specified in Clause 10.3 of IRSGCC April 2022-PART-I and as per ACS No.1 of IRSGCC 2022."Regulationsfor Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed in Proforma2 of Proforma set.The tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender.
In support of Financial Eligibility Criteria: The tenderers shall submit requisite information as per Annexure-VIB, vide para 10.2, Part I of GCC 2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
FILLING OF RETURNS REGARDING GST : "The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Desgination, 1.1.1 address & email ID).In case of a contract award, a copy of the LOA / Purchase order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officers mentioned in the Tenderer's bid"
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs Asper clause 10.1(a) of IRGCC-2022 ( part-1) :. (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender B ) Technical eligibility for composite tender: 1.Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3. In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. 4.Technical eligibility shall be fulfilled by tenderer or any member having minimum 26% share in case of JV as per clause 10.1.(b)(i)of IRSGCC- 2022(Part-I)and17.15.1(a)and(b)of IRSGCC-2022( Part-I)&as per ACS No.1 for the component /components of value of more than 50%of tender value or by Sub- contractor as per clause7(a)(ii) of GCC (Part-II) for the other component/ components of value less than 50% of tender value. Each other member of JV shall have technical capacity of minimum 10% of advertised value of any component. 5. If the Tenderer proposes to subcontract any component/ components as per item 4 above , which is less than 50%of tender value, then a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the sub- contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. 6.For component less than Rs2Cr,technicalEligibilitywill not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender.7.The contractor will engage an eligible sub-contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022 . Note: Tenderers may see Explanation for Para10 of the Tender Form (Second Sheet) including Para10.1 to 10.5- Eligibility Criteria of IRSGCC-2022.Clauses as per GCC 2022 as amended from time to time is applicable. NOTE:(i)The Experience Certificates are to be Attached to the e-offer as per Proforma- 1 in the proforma set of tender document.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turn over of Rs. 500crore and above in last 3 financial years excluding the current financial year,listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. The work executed by the tenderer for any Govt. /Govt. bodies/ PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2022
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries as per clause-27 of SCC 2022
The Tenderer shall be eligible only if he fulfills the following Standard Technical Eligibility Criteria :- The tenderer should furnish with his tender offer the particulars of the Electrical license held by him. The work shall be carried out by a Tenderer/Contractor holding a valid ELECTRICAL CLASS I LICENCE issued by any state Government for carrying out the installation work of the voltage classes involved, under the direct supervision of the persons holding valid certificates of competency for the same voltage classes issued or recognized by the State Government. The successful tenderer shall furnish the names and particulars of certificates of competency of the supervisors and workmen to be engaged for carrying out this work.
SIMILAR NATURE OF WORK : "Works of erection/ laying and commissioning of overhead lines/ underground cables for 11KV or above , with or without supply of over head lines/ cables."
108 conditions · 5 needing a document upload
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2025
Uploading of scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by charted accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc.as per Note for clause 10.1of IRGCC - April-2022
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as per clause 7, Part-II of IRSGCC-2022, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause10.1(b)(3) of IRSGCC-April-2022.
Uploading a scanned copy of Standard Format for Certificate as per Annexure V of IRSGCC-April-2022 linked under heading submission of Standard Format for Certificate.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India
Uploading a scanned copy of Registration Certificate by Start-up firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full Bid security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority or payment of 50% Bid security
Form-4 (Alternative Proposal of the Tenderer):Have you submitted Form-4
Have you attached the digitally signed copy of tender document
Form 11C: Have you submitted Form11C i.e. Complete technical data and particulars of equipment
Form-12D: Have you submitted Form 12D i.e. Details of existing commitments and balance amount of ongoing works.
Uploading of required documents in case of Individual or propriety firm /concern or partnership firm or company or joint venture firm / HUF / Society /LLP etc., as mentioned in technical compliance (whichever is applicable)
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (as per Form 23 (Proforma 7of Proforma set)).
Uploading of Scanned copy of Bid capacity (as per Annexure II of Part I,Chapter I of Tender document (Proforma - 2 of Proforma set)) and in terms of clause 10.3&10.5 of IRSGCC- April-2022
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6 of Proforma set).
Uploading of Proforma (Proforma-9 of Proforma set) attached with Tender Document for self- Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10Crores
Uploading of (Proforma-10 of Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Form-24 (Proforma 5 of Proforma set): Have you submitted Form-24 (Proforma 5 of Proforma set)i.e.,Bank details, GST & PAN
Form-1A (Annexure I of Part I, IRSGCC 2022 (Offer Letter)): Have you submitted Offer Letter i.e., Form-1A (Annexure I of Part I, IRSGCC 2022) with details of reporting of employment, mobilization advance and LC arrangements if any.
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of digitally signed copy of the details of construction machinery, Tools and plants, Vehicles etc.in Proforma 3 of proforma set of tender document
Any other document required for evaluation of his/their bid as deemed fit by the tenderer.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of explanatory notes in clause 10 of IRSGCCApril-2022-Part-I. (iii) All other documents as per Clause 14 of IRSGCC-April2022 - Part-1.
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission ofbids, either in their individual capacity or in any firm/LLP in which they were /are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv)Other documents as mentioned in terms of explanatory notes in clause 10 of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 and Clause 18of IRSGCC-April-2022-Part I.Conditions as per IRSGCC April 2022 &ACS.2,as amended from time to time is applicable.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: (A)In case one or more of the members of the JV is/are Partnership firm(s): (1) A notarized copy of the Partnership Deedor a copy of the Partnership deed registered with the Registrar. (2) A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (3) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (4) An undertaking by all partners of the partnership firm that they are not black listed or debarred by Railways or any other Ministry/ Department of the Govt.of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were/are partners/members. Any Concealment/wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (B)In case one or more members is/are HUF: (1) A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (C) In case one or more members of the JV is/are Companies: (1) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (2) A copiesof MOA (Memorandum of Association)/AOA (Articles of Association) of the company (3)A copy of Certificate of Incorporation (4) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s: (1) A copy of LLP Agreement (2) A copy of Certificate of Incorporation of LLP (3) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement (4) A copy of Authorization/copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (5) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt.of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Any Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E) In case one or more members of the JV is/are Society/s or Trust/s: (1) A copy of Certificate of Registration (2) A copy of Memorandum of Association of Society/Trust Deed (3) A copy of Rules & Regulations of the Society (4) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/ Trust
Conditions as per IRSGCC April 2022 & ACS.2,as amended from time to time is applicable as above para.6
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) Anundertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April2022. (iv) All other documents as perClause14 of IRSGCC-April-2022- Part1.Conditions as per IRSGCC April 2022 & ACS.2,as amended from time to time is applicable
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders /contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment/wrong information in regard to above shall make the contractliable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (vi) All other documents as per Clause 14 of IRSGCC-April-2022- Part1.Conditions as per IRSGCC April 2022 & ACS.2,as amended from time to time is applicable.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-PartI. (v) All other documents as per Clause14 of IRSGCC-April-2022-PartI.
Uploading of Scanned copy/copies of formal agreement duly executed and notarized by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with thetender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s)of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed/ Memorandum of Understanding/ Article of Association/ Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner (s) of the firm or any other person , shall be submitted after award of work , specifically authorizing him/ them to deal with all other contractual activities subsequent to signing of agreement , if required. Note: A Power of Attorney executed and issued overseas , the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of attorney is being issued, However , the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
Scanned copy of Statement of Bank details, PAN & GST (as per Form 24 (Proforma 5 of Proforma set)).
Request for Mobilization Advance if applicable (as per Proforma- 8 of Proforma set).
Proforma-9 of Proforma set for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per clause 23.8 (a) of Special Conditions of Contract).
Proforma-10 (Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores.(as per clause 23.8 (b) of Special Conditions of Contract)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Arranging additional High Tension Power supply to an extant dedicated feeder for 1150KVA (Existing 350KVA) totaling to 1500KVA from pottery Road to Bangalore Cantonment Railway station.
ECN-01-2026
ECN-01-2026
Open
Works - General
4 Months
Dharwad, Karnataka
₹0
₹2.1 L
18 Feb 2026
27 Jan 2026
4 Feb 2026
83 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,12,52,164.02 | ||
| — | 1.00 | — | — | ||
| Supply, Erection, alignment, fixing, testing & commissioning of 11KV MCVCB, 500MVA, 31.5KA, 1600A, 110V DC Feeder panel with DAS Compatible. Including all accessories (like drilling, cutting, welding modification work in the 11kV switch gear platform such as alignments of channels, providing angles). As similar to MEI make. | — | — | — | 15,04,438 | |
| — | 1.00 | — | — | ||
| Supply, Erection testing & commissioning of Annunciator Panel for the following 2 combinations (for both MCVCB & PCVCB) . Integration of feeders to existing SCADA system, including accessories. As similar to MEI make. | — | — | — | 91,985 | |
| — | 4000.00 | — | — | ||
| Transportation Laying testing and commissioning of 11kV, 3cX400 Sqmm, XLPE HTUG Cable (ROUND Armoured).in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by SSE/E/CN/BNC for 3x300 to 3x500 Sqmm & in trenchless without HDPE pipe.(Cable will be supplied by SSE/E/Stores/CN/BNC). | — | — | — | 2,64,000 | |
| — | 21.00 | — | — | ||
| Supply & Fixing of Heat shrinkable type cable termination kits suitable for 3CX400Sqmm XLPE cable with Copper Lugs (indoor type) | — | — | — | 1,98,996 | |
| — | 1.00 | — | — | ||
| Supply & Fixing of Heat shrinkable type cable termination kits suitable for 3Cx400Sq.mm XLPE cable With copper lugs(outdoor type). | — | — | — | 10,245 | |
| — | 20.00 | — | — | ||
| Laying of 19 Core 2.5 sq.mm Copper control cable as per KPTCL Requirement (cable will be supplied SSE/E/Stores/CN/BNC) | — | — | — | 300 | |
| — | 20.00 | — | — | ||
| Laying of 4Cx 4SQMM copper control cable as per KPTCL Requirement (cable will be supplied SSE/E/Stores/CN/BNC). | — | — | — | 300 | |
| — | 20.00 | — | — | ||
| Laying of 2 core 6 SQMM copper control cable as per KPTCL Requirement (cable will be supplied SSE/E/Stores/CN/BNC) | — | — | — | 300 | |
| — | 3.00 | — | — | ||
| Supply & fixing of Copper Coupling Bus-Bar for 11 kV switch gears (as per market rates which is suitable to the existing Breaker Bus-Bar) Dimension:100mm*12mm of suitable length. (1No: 8Kgs approximate). | — | — | — | 20,391 | |
| — | 2.00 | — | — | ||
| Supply & Provision of Insulation Mats 1000x2000x12mm as per KPTCL/EB norms specification. | — | — | — | 14,160 | |
| — | 2.00 | — | — | ||
| Supply & Provision of GI Checker Plates (1300X1500X8mm) as per KPTCL/EB norms specification. | — | — | — | 14,160 | |
| — | 50.00 | — | — | ||
| Supply & Fixing of Grounding of equipment with 50 X 6 mm GI flat and connecting the equipment to the earth mat or ground pit KPTCL/EB norms specification. | — | — | — | 23,700 | |
| — | 1.00 | — | — | ||
| Supply,Fixing and Commissioning of earthing (cast iron pipe of 100 Dia, 13mm thickness 2.75 metres long with 2 parts clamp out of G.I flat 50 x 6 mm continuously welded all- round the pipe using cat iron welding electrodes as per KPTCL drawing including earth chamber. | — | — | — | 23,057 | |
| — | 1.00 | — | — | ||
| Supply and providing 450mm Dia 450 m height 1.5" to 2" thick Hume pipe collar for earth pits including all lead and lifts etc. as per KPTCL/EB norms specification. | — | — | — | 2,123 | |
| — | 12.00 | — | — | ||
| Supply & fixing of Heat Shrinkable indoor type cable termination kit for XLPE cable 3CX95 Sq.mm as per KPTCL/EB norms specification. | — | — | — | 95,520 | |
| — | 3.00 | — | — | ||
| Supply & installation testing & commissioning of Compact RMUs,(VCB/SF6 Type) with Aluminum Busbar 1 way (OD) for RMU including foundation, frame angle welding etc. as per BESCOM standard & Specification. | — | — | — | 11,75,583 | |
| — | 4.00 | — | — | ||
| Supply & fixing of Heat Shrinkable Straight through jointing kits for XLPE cable with copper lugs & AI ferrules 3CX95 Sq.mm. | — | — | — | 52,800 | |
| — | 1.00 | — | — | ||
| Supply installation testing & commissioning of Compact RMUs, (VCB/SF6 UNIT Type) with Aluminum Busbar RMU(4way): One In comer+ Two Breakers +one out going (2OD +2 VL); 350 MVA 650A foundation, frame angle welding etc. as per BESCOM standard & Specification. | — | — | — | 11,10,370 | |
| — | 1.00 | — | — | ||
| Supply installation testing & commissioning of Compact RMUs, (VCB/SF6 Type) with Al Busbar RMU(5way). One In comer Three Breakers one out going (2OD3 VL). 350 MVA 650A foundation, frame angle welding etc. as per BESCOM standard & Specification. | — | — | — | 17,26,861 | |
| — | 15.00 | — | — | ||
| Supply and fixing of pipe earthing 11KV G.I. Grounding pipe, B-Class, 40 mm dia,2.5 mtrs long, 2.9mm thick with bolts nuts, GI Strips 25mmx3mm and washers, salt and charcoal complete as per Drawing | — | — | — | 62,100 | |
| — | 150.00 | — | — | ||
| Transportation Laying testing and commissioning of 11kV 3Cx95SQMM XLPE HTUG Cable (ROUND Armored)- in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the SSE/E/CN/BNC for 3x300 to 3x500 Sqmm & in trenchless without HDPE pipe. (Cable will be supplied by SSE/E/Stores/CN/BNC) | — | — | — | 9,150 | |
| — | 1.00 | — | — | ||
| Supply installation testing & commissioning of Compact RMUs, (VCB/SFG UNIT Type) with Al Busbar | RMU (3 way); One In comer+ One Breaker +one out going (2OD+1 VL): 350 MVA, 650 foundation, frame angle welding etc. as per BESCOM standard & Specification. | — | — | — | 8,76,301 | |
| — | 3200.00 | — | — | ||
| Trenchless Technology by adopting Horizontal Boring & Drawing of cable including preparation at site for Normal soil 5/6" Bore Without HDPE Pipe as per BESCOM standard & Specification. | — | — | — | 30,36,800 | |
| — | 1.00 | — | — | ||
| Supply & erection of 11kV HT Metering cubicle of UNIT different CT Ratio, Both side cable entry type with 3CT & 3PTs, With Transparent Cover TTB, with 30x8mm Cu Bus bars, Modem and 2 Nos of Meters for 3Ph 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3mm MS Sheet duly epoxy powder coated) as per BESCOM standard & Specification. | — | — | — | 3,48,444 | |
| — | 6.00 | — | — | ||
| Providing and Laying in position plain cement cocreate of mix 1:2:4 with Cement@ 240 Kgs, with 20 mm and down size graded granite metal coarse aggregates @ 0.878 CMT and linen aggregates@ 0.459 M machine mixed concrete laid in layers not exceeding 15 cm. thick well compacted, in foundation and plinth and calls, including cost of all materials, Laboure, HOM of machinery, curing complete as per BESCOM standard & Specification. | — | — | — | 44,322 | |
| — | 50.00 | — | — | ||
| Released (Scrap) and handing over of existing HT Metering cubicle, Distribution boxes, KG 50 30 1500 feeder pillar boxes with CT and PT. The details of released materials list Handed over to SSE/E/CN/BNC office. | — | — | — | 76,800 | |
| — | 12.00 | — | — | ||
| Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such similar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface levelled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift up to 1.5 m including cost of Laboure, tools & other appurtenances required to complete the work. In all kinds of soils Depth up to 1.5 m. as per KPTL/EB norms & specifications'. | — | — | — | 4,116 | |
| — | 3.00 | — | — | ||
| Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, Laboure, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates as per KPTL/EB norms and specifications. | — | — | — | 26,112 | |
| — | 4.50 | — | — | ||
| Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, Laboure, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates +3% Shuttering as per KPTL/EB norms and specifications. | — | — | — | 40,468.5 | |
| — | 9.50 | — | — | ||
| Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement: 6 coarse sand as per KPTL/EB norms and specifications. | — | — | — | 85,604.5 | |
| — | 700.00 | — | — | ||
| Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, Laboure, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge as per KPTL/EB norms and specifications. | — | — | — | 1,07,100 | |
| — | 750.00 | — | — | ||
| Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, Laboure, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge as per KPTL/EB norms and specifications. | — | — | — | 1,12,500 | |
| — | 100.00 | — | — | ||
| Painting with synthetic enamel paint of approved brand and manufacture of required Colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, Laboure complete as per KPTC/EB norms and specifications and as per directions of Engineer-in-charge. | — | — | — | 23,600 | |
| — | 30.00 | — | — | ||
| Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, Laboure, curing complete as per KPTCL/EB norms and specifications and as per directions of Engineer-in-charge. | — | — | — | 14,070 | |
| — | 8.50 | — | — | ||
| Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) after raking joints to depth nicely lining, including cost of materials, Laboure, curing as per KPTL/EB norms and specifications and as per directions of Engineer-in charge. | — | — | — | 3,068.5 | |
| — | 4.01 | — | — | ||
| Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per KPTL/EB norms and specifications. | — | — | — | 1,511.77 | |
| — | 42.00 | — | — | ||
| Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 MPa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per KPTL/EB norms and specifications. | — | — | — | 33,768 | |
| — | 15.00 | — | — | ||
| Supply and fixing of rigid PVC pipe 25mm dia.+/-0.2mm, 2 mm thick with accessories for wiring with ISI mark as per KPTL/EB norms and specifications. | — | — | — | 798.75 | |
| — | 20.00 | — | — | ||
| Supply and running of wires for submains with 2 runs of 2.5 sqmm multi strand PVC insulated copper wire (FRLSH) for phase and neutral 1 run of 1.5sqmm copper wire (FRLH) for earth connectivity with Colour codes as per specifications. | — | — | — | 2,180 | |
| — | 1.00 | — | — | ||
| Supplying & fixing 63A 4pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10KA and complete wiring as required as per KPTL/EB norms and specifications. | — | — | — | 760 | |
| — | 7.00 | — | — | ||
| Supplying & fixing of 40W 230V AC supply 50Hz batten type 4 Feet LED light fitting with anodized extruded aluminum housing along with lamp and driver with all fixing accessories (ceiling rose, round lock, screw, guttas, round flexible wire etc.) as per site condition confirming to specification no. SWR/LED/LIGHT FITTING(indoor /Outdoor)/011-2016 dated.18.04.16 and removing of old conventional fittings without damaging it and handling over the released fittings to the concerned SSE/EB authority .( Prior to the supply of light fittings approval is to be taken duly submitting sample light fittings to the concerned SSE). | — | — | — | 13,300 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1-IRSGCCApril2022.pdf
ATTACHMENT
2-IRSGCCCorrectionSlipNo-10Dated24-06-2025.pdf
ATTACHMENT
3-ACS-1GCC-2022Policy14-07-2022.pdf
ATTACHMENT
4-ACS-2GCC-2022Policy13-12-2022.pdf
ATTACHMENT
5-ACS-3GCC-2022Policy26-04-2023.pdf
ATTACHMENT
6-ACS-4GCC-2022Policy07-08-2023.pdf
ATTACHMENT
7-ACS-5GCC-2022Policy20-10-2023.pdf
ATTACHMENT
8-ACS-6GCC-2022Policy21-12-2023.pdf
ATTACHMENT
9-ACS-7GCC-2022Policy25-09-2024.pdf
ATTACHMENT
10-ACS-8GCC-2022Policy20-12-2024.pdf
ATTACHMENT
11-ACS-9GCC-2022Policy09-01-2025.pdf
ATTACHMENT
12-ACS-10GCC-2022Policy04-03-2025.pdf
ATTACHMENT
13ProformasetEGS.pdf
ATTACHMENT
14SCC-11-2025.pdf
ATTACHMENT
15JPOEARTHWORK.pdf
ATTACHMENT
SPECIALCONDITIONSOFCONTRACTORELECTRICAL.pdf SPECIAL CONDITIONS OF CONTRACTOR EL
ATTACHMENT
TECHNICALSPECIFICATION.pdf
ATTACHMENT
SPECIALCONDITIONSOFCONTRACTORELECTRICAL.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .