Providing lighting and power supply to the proposed construction of Raw Material Store Building at Foundry and Forge Division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)

PAN No.:

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs:

Please Enter Turn over in Rupees for all the 3 years

Details of Registered Contractor

ESI No.:

GST Detail:

Please Enter GST Details

Related Document to be uploaded in ePortal

Contact details

Please Enter Contact person Name

Please Enter Mobile No

Valid Electrical contractor license of appropriate voltage (Minimum 650V) issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender.

Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following: [Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II

work done

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III

Details of person holding the power of Attorney :

Related Document to be Uploaded to eProcurement Portal

Please Enter Details for Person holding Power of Attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

Subject tender has been called on item rate basis. Basic Rate to be quoted for each item.

Subject work is a Works contract and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Specification of item

Supply, fixing to existing MS perlins at approx. 6 mtr height, including using suitable MS angle frame work with required fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 80watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass, integral control gear, eye hook etc., (as per OEM standards). The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ 110lm/watt and lumen output not less than 8800lumens, PF>0.90 and Colour temprature shall be ≥5700K, CRI≥70,THD <10%, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures and other standard accessories complete in all respects and as directed by Engineer in-charge. The fitting shall be of Crompton model no: TIP-320-80-57-SL-GL-NSG/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminares & LM80 certificate for LED shall be produced.

Supply, installation, testing & commissioning of 600mm dia heavy duty oscillating type Air-circulator along with three speed regulator of any approved make with all connected accessories and interconnections, including power cord with 6A, 3 pin plug top and complete in all respects and as directed by Engineer-in-charge

Distribution Board

4 way (4 + 12), Horizontal Double door MCB DB

32 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity.

63 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity.

6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity.

Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required.

Wiring for circuit / submain wiring along with earth wire with 2 x 4 sq. mm + 1 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supply, laying, testing & commissioning of following size LT armoured power cable

Supply of 3.5C X 50 Sqmm Aluminium armoured conductor.

Supply of 3.5C X 35 Sqmm Aluminium armoured conductor.

Supply of 3.5C X 25 Sqmm Aluminium armoured conductor.

Supply of 4C X 10 Sqmm Aluminium armoured conductor.

Supply of 3C X 2.5 Sqmm Copper armoured conductor LT Control Cable

Supply and connecting indoor type cable end joints for the following size 1.1 KV gr., PVC insulated and PVC sheathed / XLPE Aluminium(Al)/ Copper(Cu) conductor armoured (Arm) LT UG cables by employing necessary glands, terminals(Al/Cu), bolts & nuts etc., complete in all respects and as detailed below:

3.5C X 50 Sqmm Al Arm LT Cable End Joint

3.5C X 35 Sqmm Al Arm LT Cable End Joint

3.5C X 25 Sqmm Al Arm LT Cable End Joint

4C X 10 Sqmm Al Arm LT Cable End Joint

3CX 2.5 Sqmm Copper armoured conductor

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5C X50 Sqmm Al Arm LT Cable straight through joint

3.5C X35 Sqmm Al Arm LT Cable straight through joint

3.5C X25 Sqmm Al Arm LT Cable straight through joint

Supply and fixing on MS perlins/wall using suitable angle iron frame work, fixing hardware, Cable junction boxes IP 65/66 with integrated membranes for cable entry of Hensel make (not less then 130x130x77mm) or equivalent model in Legrand/ Hager/ Schneider with cover and providing 16A 6way PVC connector inside the box as directed by Engineer -in-charge.(For High bay LIGHT fittings)

Supply and fixing on MS perlins/wall using suitable angle iron frame work, fixing hardware, Enclosuere/junction boxes IP 65/66 with integrated membranes for cable/conduit entry of Hensel make or equivalent model in Legrand/ Hager/ Schneider with cover for fixing 6/16A socket outlet with 16A switch control inside the box as directed by Engineer -in-charge. Note:- modular box, socket outlet and switch will be measured separately.

HDPE PIPE

Supply and laying of 63mm dia, PE-100 , PN8 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge.

Design, fabrication, Supply, erection, testing & commissioning of Indoor Type LT Panel (PTA)

Incoming

1-No 200A 415V gr 4P 36KA MCCB.

Lot - 300A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1 Set-200/5A current transformers of suitable class and VA burden for metering.

1No 16A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

Outgoing

6 Nos - 32 A 4Pole, MCB "C" Curve - 10 KA breaking capacity

6 Nos - 63 A 4Pole, MCB "C" Curve - 10 KA breaking capacity

Supplying and fixing of 200/225 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle , horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc.

Design, Fabrication, Supply and fixing/grouting in wall/ceiling of suitable size MS angle iron supports/ flat/ brackets for cable tray supports, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC.

Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil & refilling the same soil and disposal of surplus excavated soil as as directed by EIC.

Concrete cutting/Chipping/Bitumen Road the existing 1:2:4 cement concrete road /pavements / flooring / rock/stone etc., including removing debris from the work site and taking out of the division and depositing in the place as directed by EIC.

Re-concreting the cut portion/ closing the dummy cable duct at same area with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed.

Disconnecting & Dismantling of existing MCCB/SDF enclosures comprising of MCCD/SDF-5nos.