Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC 29 MODEL TOWN BEHIND GURUDWARA PATHANKOT | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC SINCE LOWEST BIDDER | |
| 2 | L2₹17.7 L+₹95,026.14 (5.67%)Rejected-Finance SCHEME NO 07 BLOCK NO 22 FLAT NO 03 NEW GURDASPUR DISTT GURDASPUR PB 143521 | GURDASPUR | PUNJAB | 143521 | L2 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 3 | L3₹17.8 L+₹1.0 L (6.11%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 4 | L4₹19.4 L+₹2.6 L (15.8%)Rejected-Finance | L4 | Rejected-Finance SINCE NOT L1 BIDDER |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
28 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR CANTT
HQ CWE AMRITSAR OLD CANTT
PROVN OF EXTERNAL SERVICES (WATER AND ELECTRIC SUPPLY) FOR PHASE IV AT DBN UNDER GE GURDASPUR
2023_MES_621052_1
CWE/ASR-38/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE GURDASPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE GURDASPUR
₹44,000
Yes
11 Jan 2024
29 Sept 2023
4 Nov 2023
29 Sept 2023
28 Oct 2023
16 Oct 2023
Amount
Supplying, installing, testing and commissioning of AC 3 phase 50 HZ all as per IS : 1180 Part II 2014 and BEE certified of capacity 100 KVA capacity transformer step down, outdoor type 11000/433 volts (at no load) copper wound, oil immersed, ONAN cooled with external cooling tubes/Fins, core type, delta connected on primary (HV) side and star connected on secondary (LV) side in accordance with vector symbol DYN-11 (vector group-4) with neutral brought on secondary (LV) side & having tappings in equal steps of 2.5 % from (+) 7.5% to (-) 7.5% on primary side by means of hand operated off load tap changing gear, so as to change/correct L.T voltage onsecondary side including provision of all necessary / standard fittings and first fill of Oil, mainly comprising of following :-
(a) One cable box on primary H.V side with brass/ gun metal bushing rods complete with nuts and washers cable gland suitable for reception of outgoing armoured cable. (b) One cable box on secondary (LV) side consisting of 4 Nos porcelain bushings cable gland suitable for reception of two Nos outgoing armoured cable. (c) Oil conservator with filter type, drain valve and oil level gauge. (d) Transparent Dehydrating breather with first fill of dry silica gel . (e) Explosion vents with diaphram. (f) Temperature guage on tank cover having Range 0-200 degree centigrade (g) Rating plate with terminal markings. (h) Two earthing terminals on tank/tank cover to facilitate fixing of 32 x 6 mm earth strip. (j) Oil drain and filter valves. (k)Oil filler hole with cap/plug complete. (l)Lifting lugs. (m) Air relief valve plug. (n) Four solid cast steel detachable rollers. (o) First fill of fresh oil conforming to relvant IS and tested upto 50 KV dielectric strength. (p) Extra bushing for neutral outside the L.T cable box for providing independent earthing for neutral. (q) Transformer shall be kept on foundations and item for foundation shall be measured and paid separately under relevant items.
Supply and Laying and testing XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty with aluminium conductor, 11000 volts Earthed, grade of size sectional area, 95 Sqmm 3 core complete, all as specified and directed.
Supply and fix cable jointing kit 11 KV (Earthed) grade cable for out door termination Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete, all as specified and directed.
Supply and fix cable jointing kit 11 KV (Earthed) grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete, all as specified and directed.
Supply and laying cable XLPE insulated, armoured electric power cables (heavy duty) 1100 volts grade with aluminium conductor of sectional area 120 Sqmm 3.5 core complete, all as specified and directed.
All as per item No 5 above but cable size 3.5 Core x35 sq mm complete, all as specified and directed.
Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out complete, all as specified and directed.
All as per item No.7 above but depth excd 1.5 mtr and n. exc 3 mtr complete, all as specified and directed.
Returning, filling in, including spreading,leveling,watering and well ramming in layers each n.exc 25 cm thick in soft loose soil complete, all as specified and directed.
Removing excavated material n exc. 50mtr and depositing where directed at a level n exc. 1.5 mtr above,the starting point complete, all as specified and directed.
Supply and laying un-reinforced precast conncrete cable cover, class HV, type 1, flat, size 300 mm x 180 mm x 40 mm laid flat in trenches over the cable with the length of cable cover perpendicular to the direction of cable length, adjacent/abutting each other complete, all as specified and directed by Engineer-in-Charge.
Supply and lay brick common burnt sub class "B" old size (compressive strength not less than 75 kg per sqcm) for protection of cable laid in trenches for under ground cable complete, all as specified and directed.
M&L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 8cm before laying the cable & 15cm after laying the cable complete, all as specified.
Labour only for drilling hole under the road with the help of bocki / by manual or by machine for crossing GI tubing of any size for cable protection complete, all as specified and directed.
M&L for PCC 1:4:8 type D:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundation etc complete, all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 type C:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly etc complete, all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B:2 using 40mm graded crushed stone aggreate as in coping of pole including necessary form work and fair finish to exposed surfaces complete, all as specified and directed.
Supply and fix prestressed concrete poles of 11 meter long 152 mmx 152mm at top and 152 mmx260mm at bottom, Class-9 complete, all as specified and directed.
M&L in replacement crossarms, bracing, supports, clamps and back plates, fabricated from staructural steel section including nut bolts washers including welding, bending , cold or hot drilling holes for bolts in any shape or size as indicated in drawings or as directed, including two coats of aluminium paint over a coat of red oxide complete, all as specified and directed.
Supply and fix HT 11 KV, out door type gang operated air-break switch Triple pole, mechanically operated, suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating upto 200 Amps complete, all as specified and directed.
M&L for pre - fabricated LT panel board out door type with CRCA sheet thickness not less than 3.15mm dust, moisture and vermin proof provision of front and rear opening including 300 Amp rated aluminium bus bar prewired including the following and necessary PCC foundation,angle iron frame (40x40x6mm),grouding on foundation 450 mm and above the ground 450 mm to fix the panel boad all as per standard specifications and CPRI approved all as specified and directed by Engineer In Charge comprising of following :-
M&L for Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 Kilo amp complete, all as specified and directed.
M&L for stay assembly complete with accessories as shown in electrical plate No.1 with 20 mm rod complete, all as specified and directed. Note : Loop insulator, clamps, excavation earth work concrete shall measured & paid separately.
Material and labour for galvanised stay strand 7/4 mm complete, all as specified and directed.
M&L for loop type insulator vitrous porcelain white, brown or green large size with overall dimention 90mm x 140mm, clearance of hole 25.5mm complete, all as specified and directed.
M&L for cable protection GI tubing of 80mm bore light grade, fixed along the pole/under road/along the wall with necessary fittings, clamps etc complete, all as specified and directed.
M&L for cable protection GI tubing of 40mm bore light grade, fixed along the pole/under road/along the wall with necessary fittings, clamps etc complete, all as specified and directed.
Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia ( 8 SWG) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I) complete, all as specified and directed.
All as per item above but using galvanise iron strip 25x4mm as earthing lead complete, all as specified and directed.
All as per item above but using galvanise iron strip 32x6 mm as earthing lead complete, all as specified and directed.
M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface complete, all as specified and directed.
M&L for cement concrete in foundations type C2 1:3:6 (using 40 mm graded aggregate) as in filling and mass concrete complete, all as specified and directed.
S&F for MS Posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc angle, flat iron fillets (for securing wire mesh etc) including all necessary dirilling bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete, all as specified and directed.
Supply only of chain link MS Galvanized fencing with mesh size 50 mmx50mm and dia of wire 4mm complete, all as specified and directed.
Fixing only chain link MS Galvanised fencing 50mm mesh, 4 mm dia wire including line wires, any mesh size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete, all as specified and directed. Note : Chain link fence to be used vide Srl Item No 35 above.
M&L Mild steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for columns hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality conforming to round bars confirming Fe 410 W (Gde, E-250), complete, all as specified and as directed by Engineer-in-charge.
M&L fo preparation of new steel surfaces of any descripation over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide peimer complete, all as specified and directed.
S&F mild steel screw or bolts (machine made) with hexoganal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and hexogonal or square nut, not exceeding 5 cm long and diameter of neck 5 to 10 mm complete, all as specified and directed.
S&F for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and /or revited, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings framework of water tanks and similar work conforming to Fe 290 grade E-165 complete, all as specified and directed.
M&L for Brick work with sub class " B" bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete, all as specified and directed.
M&L for 15 mm thick cement palster in cm 1:4 as on other than fair face of brick or concrete surface finished surface even and fair all as specified and directed Note ; Supply only water proofing liquid shall be measured and paid separately complete, all as specified and directed.
M&L for preparing newly palstered surfaces of walls and applying two coats cement base paint complete, all as specified and directed.
Material and labour for fixing cable route indicators made of PCC (1:3:6) type C-1 including CI part indicator Brown coloured of circular shape of dia 150 mm fixed on angle iron of size 40x40x4mm not less than 0.3 mtr of height over the PCC duly engraved " HT CABLE/HT JOINT PCC block size 150x150x300 mm complete, all as specified and directed.
Supply and layout galvanized steel tube, “Medium grade of 20 mm bore”, including fittings laid in trenches or on wall complete, all as specified and directed.
All as per Srl Item No 44 here-in-before but 25 mm bore complete, all as specified and directed.
All as per Srl Item No 44 here-in-before but 40 mm bore complete, all as specified and directed.
S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 40 mm bore complete, all as specified and directed.
All as per Srl Item No 48 here-in-before but 25 mm bore complete, all as specified and directed.
All as per Srl Item No 48 here-in-before but 20 mm bore complete, all as specified and directed.
M & L valve pits and constructing of brick masonary pits of internal dimensions 600mm x600mm x600 mm ( bottom PCC floor of the pit should be minimum 30 cms below the bottom surface to of sluice valve flange to provide sufficient working space) , bottom floor of the pit be constructed in PCC (1:3:6) 15 cms thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 MM thick. The sluice valve and other fittings should be housed in center of the pit. the vertices of the pit should in right angle and champhered .The top cover of the pit will be made out of MS sheet min 2mm thick witth angle iron frame made out of MS angle 50mm x50 mmx 6 mm with galvanised steel hindges two nos ,and locking arrangements duly painted with two coats of water resistant synthetic enamelled paint over one coat of red oxide complete, all as specified and directed.
Supply and fixing of HDPE/PVC make up water tank of 5000 LTRS capacity installed on MS angle iron staging upto suitable height as per manufacturer specifications for make up water requirement including brass float valve with ployethylene ball, over flow and drain arrangement, including cutting of existing pipe line and tapping of branch connections, laying of suitable bore GI pipe , medium grade as incomer all as directed by Engineer-in-Charge. Note : Staging includes excavation in trenches, removal of soil, PCC 1:3:6 and MS work of angle iron, flat iron (approx 750 kg) etc is included in the quoted rate. The design and specification of staging will be as directed by Engineer-in-Charge.
Cutting existing steel tubing of 40 or 50 mm dia for alterations or additions and screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) in position without taking down complete, all as specified and directed.
HARPAL ENGINEERS AND BUILDERS
Kaul Enterprises
dinesh enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .