CPPP

Active

Works

Miscellaneous Works

Replacement of old Package units 8 75 TR 3 installed at Data Centre with New AHU Units PGIMER Chandigarh

Postgraduate Institute of Medical and Education and Research Chandigarh

data centre | Chandigarh

Amount: ₹17.6 LCloses: 22 Sept 2026Due today

Timeline

Published10 Sept 2026
Closes22 Sept 2026
Bid Opening23 Sept 2026

Tender Value

₹17.6 L

EMD Value

₹35,220

Closing Date

22 Sept 2026, 3:00 pmDue today

Tender Inviting Organisation

Name

HE RAC

Address

room no 225 department of hospital engineering and planning RAC Division

Work Description

Replacement of old Package units 8 75 TR 3 installed at Data Centre with New AHU Units PGIMER Chandigarh

Tender Information

Tender ID

2026_PGIME_925626_1

Reference Number

PGI/Engg/RAC/2026/323

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Works

Period of Work

90 days

Location

data centre

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredDNIT (.pdf)

Finance

Requiredprice bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹35,220

Important Dates

Last Activity

10 Sept 2026

Published

10 Sept 2026

Bid Opening

23 Sept 2026

Download Starts

10 Sept 2026

Download Ends

22 Sept 2026

Submission Starts

10 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (66 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Air Handling unit
1.1	Supply, installation, testing and commissioning of Floor mounted Double skin Air Handling units having precoated/preplasticised GI sheet of 0.8mm on outside & 1.00 mm thick plain Aluminium sheet intside. The minimum panel thickness should be 25+/-2 mm having CFC free PUF ( 40 +/- 2 kg density) injected between the panels with thermal break profile. Filter section with Pre filter & Fine filter. Cooling coil section with combination of 4(w) + 4(s) rows rows coils and atleast 400mm gap between the coils. SS Coil casing, SS Drain Pan with nitrile rubber insulation, aluminium fins (11-13 FPI) & copper tube thickness as per ODU manufacturer standard. Fan section with backward curved fan, energy efficient IE3, TEFC motor(VFD Compatible), V-belt & drive set as per the detail specifications of the DNIT. 6000 CFM (65 mmwg st. press.)	1	nos.	5,28,963	₹5,28,963
2	SITC of 8.5 TR outdoor units for DX coil AHU complete as required.	4	nos.	1,69,272	₹6,77,088
3Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft / hard drawn copper refrigerant piping for HVAC system, complete with fittings ,with suitable adjustable ring type hanger supports, jointing / brazing including accessories, insulated with XPLE Class-O tubular insulation with Class-O closed cell elastometric nitrile rubber tubular sleeves section so specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
3.01	28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm or as per OEM standard with 19 mm thick insulation	65	Rmt	1,108	₹72,020
3.02	15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm or as per OEM standard with 19 mm thick insulation.	65	Rmt	588	₹38,220
4Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
4.01	22 GUAGE (0.80 mm)	20	Sqm	1,415	₹28,300
4.02	24 GUAGE (0.63 mm)	20	Sqm	1,213	₹24,260
5Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.37 MB

Work Item Documents

BOQ_972689.xls

BOQ • 0.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Air Handling unit
1.1	Supply, installation, testing and commissioning of Floor mounted Double skin Air Handling units having precoated/preplasticised GI sheet of 0.8mm on outside & 1.00 mm thick plain Aluminium sheet intside. The minimum panel thickness should be 25+/-2 mm having CFC free PUF ( 40 +/- 2 kg density) injected between the panels with thermal break profile. Filter section with Pre filter & Fine filter. Cooling coil section with combination of 4(w) + 4(s) rows rows coils and atleast 400mm gap between the coils. SS Coil casing, SS Drain Pan with nitrile rubber insulation, aluminium fins (11-13 FPI) & copper tube thickness as per ODU manufacturer standard. Fan section with backward curved fan, energy efficient IE3, TEFC motor(VFD Compatible), V-belt & drive set as per the detail specifications of the DNIT. 6000 CFM (65 mmwg st. press.)	1	nos.	5,28,963	₹5,28,963
2	SITC of 8.5 TR outdoor units for DX coil AHU complete as required.	4	nos.	1,69,272	₹6,77,088
3Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft / hard drawn copper refrigerant piping for HVAC system, complete with fittings ,with suitable adjustable ring type hanger supports, jointing / brazing including accessories, insulated with XPLE Class-O tubular insulation with Class-O closed cell elastometric nitrile rubber tubular sleeves section so specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
3.01	28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm or as per OEM standard with 19 mm thick insulation	65	Rmt	1,108	₹72,020
3.02	15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm or as per OEM standard with 19 mm thick insulation.	65	Rmt	588	₹38,220
4Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
4.01	22 GUAGE (0.80 mm)	20	Sqm	1,415	₹28,300
4.02	24 GUAGE (0.63 mm)	20	Sqm	1,213	₹24,260
5Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Air Handling unit

1.1

Supply, installation, testing and commissioning of Floor mounted Double skin Air Handling units having precoated/preplasticised GI sheet of 0.8mm on outside & 1.00 mm thick plain Aluminium sheet intside. The minimum panel thickness should be 25+/-2 mm having CFC free PUF ( 40 +/- 2 kg density) injected between the panels with thermal break profile. Filter section with Pre filter & Fine filter. Cooling coil section with combination of 4(w) + 4(s) rows rows coils and atleast 400mm gap between the coils. SS Coil casing, SS Drain Pan with nitrile rubber insulation, aluminium fins (11-13 FPI) & copper tube thickness as per ODU manufacturer standard. Fan section with backward curved fan, energy efficient IE3, TEFC motor(VFD Compatible), V-belt & drive set as per the detail specifications of the DNIT. 6000 CFM (65 mmwg st. press.)

nos.

5,28,963

₹5,28,963

SITC of 8.5 TR outdoor units for DX coil AHU complete as required.

nos.

1,69,272

₹6,77,088

3Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft / hard drawn copper refrigerant piping for HVAC system, complete with fittings ,with suitable adjustable ring type hanger supports, jointing / brazing including accessories, insulated with XPLE Class-O tubular insulation with Class-O closed cell elastometric nitrile rubber tubular sleeves section so specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

3.01

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm or as per OEM standard with 19 mm thick insulation

Rmt

1,108

₹72,020

3.02

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm or as per OEM standard with 19 mm thick insulation.

Rmt

588

₹38,220

4Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

4.01

22 GUAGE (0.80 mm)

Sqm

1,415

₹28,300

4.02

24 GUAGE (0.63 mm)

Sqm

1,213

₹24,260

5Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.