Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.5 LAccepted-Finance | L-1 | Accepted-Finance Due to L-1 | |
| 2 | L-2₹10.6 L+₹8,890.75 (0.85%)Rejected-Finance | L-2 | Rejected-Finance Due to L-2 | |
| 3 | L-3₹10.9 L+₹42,101.45 (4.00%)Rejected-Finance | L-3 | Rejected-Finance Due to L-3 |
Tender Value
₹10.9 L
EMD Value
₹22,000
Closing Date
30 May 2023, 10:30 amClosed
Executive Engineer
Executive Engineer, Kalpa Division, HP.PWD. Kalpa, District Kinnaur HP
Periodical maintenance of link road to Village Shukarang under AMP for the year 2023-24 (STATE road) (SH- Annual surfacing from Km. 0/00 to 0/530
2023_PWD_73842_2
KNR-E-Tender/23-911-20-911-20 dt.08-05-23
Open Tender
Civil Works - Roads
Item Rate
90 days
Kalpa
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹22,000
13 Jun 2023
24 May 2023
30 May 2023
24 May 2023
30 May 2023
24 May 2023
Amount
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per Technical Specification Clause 405, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90(zero point nine zero)-1.20(one point two zero) kg/sqm(kilogram per square meter) using mechanical means as per Technical Specification Clause 502, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm (Zero point twenty five to zero point thirty kilogram per square metre) on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing laying and rolling of open graded premix carpet of 20mm (twenty millimeter) thickness compossed of 13.2mm to 5.6 mm(thirteen point two millimeterto dive point six millimeter) aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat Type A or Type B or Type C as per technical Specification Clause 508, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying seal coat sealing the voids in bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per technical specification clause 510, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying of hot applied thermoplastic compound 2.5 mm(two point five millimeter) thick including reflectorising glass beads @ 250(two hundred fifty) gms per sqm area, thickness of 2.5mm(two point five millimeter) is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
VIPAN KUMAR GOVT. CONTRACTOR
SANJEEV KUMAR CONTRCATOR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .