Construction of Government Industrial Training Institure (ITI) in Tehsil Derapur, Assembly Area Sikandra District Kanpur Dehat

Amount

Clearing jungle including up rooting of trunk vegetations grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters outside the periphery of area cleared.

Earth work in excavation in trenches for foundations pipes cable etc in ordinary soil (Loan clay or sand) including lift upto 1.5 m. lead upto 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i/c within a lead of 50m.

Earth filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead upto 50m and lift upto 1.5 m.

Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead upto 50m and lift upto 1.5 m excluding cost of sand. (including cost of sand)

Providing and laying in cement concrete 4:2:1 of not less than strength of M 150 [stone ballast 4 (40 mm. normal size) : 2 approved coarse sand : 1 cement] and curing complete, including cost of formwork in foundation and floors.

R.C.C works with cement approved coarse sand and 2 cm (3/4”) gauge approved stone ballast in the proportion 1:1.5:3 (1 cement : 4.5 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending the same with 24 B WG binding wire and necessary centering and shuttering etc, and also including supply of all materials labours and tools and plants etc required for proper completion of works.

Class-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc, required for proper completion of the work Cement mortar 1:4 (1 cement : 4 coarse sand)

Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in superstructure above plinth level upto floor two level (upto two storeys) including supply of all materials, labour and tools and plants etc, required for proper completion of the work including necessary cutting and moulding of brick work as required.

Providing and injecting chemical for pre-constructional anti-termite treatment and creating and chemical barrier under and around the coloumn pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured as per I.S 6313(part II1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor of Chlordane will be used. The rate of application of chemical emulsion shall be as follows.(1) Treatment for masonry and foundation 5 liters per Sq.M (2) Back fill in immediate contact with foundation 7.5 liters per Sq.M (3) Treatment of top surface of plinth filling 5 liters per Sq.M (4) Treatment of soil along external per meter of Building 7.50 liters per Sq.M (5) Treatment of soil under apron along external per meter 5 liters per Sq.M

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. (10 mm tor)

Providing and fixing SS sliding door bolts, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250mm x 16mm

Providing and fixing SS tower bolts, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250mm x 10mm

Providing and fixing SS handles, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete : 125mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) for fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing & Fixing Panes of glass with equal or equivalent I.S.I marked quality putty. brads and springs and including supply of all materials and labour ete complete.

Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations : (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5(1 Cement :5 Coarse Sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive. 1:4 (1 cement: 4 fine sand)

15 mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth. 1:4 (1 cement: 4 fine sand)

12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive. (I) 1 Cement : 3 Coarse sand

Making grooves 10 to 12 mm wide X 8 mm deep in plaster the all or in ceiling vertically of horizontally as required.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing & Laying of 8 to 10 mm thick ivory or light shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work. Size of Tile 600x600 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm

Providing and fixing 18.00 mm thick gang saw cut, mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20.00 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra Granite of any colour and shade

Providing & laying of KOTA Stone of size 45x45 cm and above flooring over previously prepared base with 2nd thick 1:3 cement and sand mortar including filling in joints with cement mixed with pigment required for matching the shade of floor as per direction E/I including cutting polishing with wax polish including supply of all materials T&P etc. required for proper completion of the work.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

One priming coat & two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.

Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the I.S.I.No. 103 1950.

Providing and laying of brick ballast 25 mm gauge under floor of toilet / sunken roof

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° size 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification (Appx. 7-Bags of Cement/cum) Therefore,Therefore, Total Bags reqd. in 87.34 x 0.05cum= 5 x 7 Total Bags reqd. in 87.34 x 0.05cum=35bags

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile upto 50 tonne Safe capacity Initial test (Test Load 2.5 times the Safe capacity) Initial test (Test Load 2.5 times the Safe capacity)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board of size 510x1040x200mm

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe a) 32mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe b) 40mm dia

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required c) Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern

Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per thedirection of Enginer-in-charge.

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms

Providing and fixing Toilet paper holder a) C.P. brass

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Providing & fixing 32 # G.I. Pipes spout including cutting & making good the walls etc.

Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100/75 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm O.D.

Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.

Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735. Size 110 mm

Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735. Size 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door size 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° size 75x75x75 mm

Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work) Exposed on wall 50mm dia nominal bore

Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. 50mm dia nominal bore.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (internal work) Exposed on wall 25mm dia nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15mm dia nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 20mm dia nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 25mm dia nominal outer dia pipes

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length a) 15mm nominal bore

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing & fixing C.P. Brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. 50mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100mm diameter

Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter S.W. Pipe

Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150mm diameter

Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 250mm diameter

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 250 mm. dia. RCC Pipes

Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 (i) For Sewer Line

Extra for depth of man hole size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar

Earth work in excavation in trenches for foundations pipes cable etc in ordinary soil (Loan clay or sand) including lift upto 1.5 m. lead upto 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i/c all kind for every additional lift upto 3.0m to 4.5m. depth

Earth work in excavation in trenches for foundations pipes cable etc in ordinary soil (Loan clay or sand) including lift upto 1.5 m. lead upto 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i/c all kind for every additional lift upto 3.0m to 4.5m. depth

Providing and laying in cement concrete 4:2:1 of not less than strength of M 150 [stone ballast 4 (20 mm. normal size) : 2 approved coarse sand : 1 cement] and curing complete, including cost of formwork in foundation and floors.

Centring and shuttering including struting , proping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and laying in cement concrete 4:2:1 of not less than strength of M 150 [stone ballast 4 (40 mm. normal size) : 2 approved coarse sand : 1 cement] and curing complete, including cost of formwork in foundation and floors.

Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materials, labour and tools and plants etc, required for proper completion of the work

Man hole cover 455*610mm with frame light duty (DSR basic rates 19.0 code no 1354)

25 mm cement concrete flooring 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of size 12.5 mm and below) by laid over base concrete finished with floating coat of neat cement (base concrete to be paid separately) including fixing of glass strips.(Excluding cost of glass strips)

Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in superstructure above plinth level upto floor two level (upto two storeys) including supply of all materials, labour and tools and plants etc, required for proper completion of the work including necessary cutting and moulding of brick work as required and also including honey combed brick in thickness of wall more than 12 cms.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Mild steel or iron work of small size and sections such as Z Section Frame etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required for completion of work.

Mild steel or iron work of small size and sections such as grill etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required for completion of work.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing powder coated (Sky blue shade) 2 mm, guage th. Aluminium partition section of 2366 mm, height till false ceilling level and 1200 mm ht. Alongwith installation of aluminium section doors wherever required as per Architectural drawing of dim. (40mm x 60mm / 80mm x 60mm) fitted with 12 mm th. both sides pre-laminated, flat particle board till 1050 mm ht. confirming to IS 12823 Grade-I Type II, with C.P. brass / stainless steel screws and fixing of 4 mm. thick float glass film (as per specified design) and EPDM rubber / neoprene gasket etc. complete as per directions of engineer in charge.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive. (III) 1 Cement : 6 fine sand

15 mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth. (III) 1 Cement : 6 fine sand

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agreegate of size 20 mm nominal size) laid in one layer finished with floating coat of neat cement (40 mm thick floor)

20 mm Cement plaster in two coats, backing coat 17 mm and finishing coat 3 mm thick(of neat cement of cement and marble dust in ratio 5:1) on rough side of single or half brick interior plastering upto floor two level including internal rounded angles.(I) 1 Cement : 3 Coarse sand

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing ball bearing for rolling shutters.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 32mm dia nominal outer dia pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 25 mm dia nominal bore

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 25 mm diameter pipe

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 40 mm diameter pipe

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. 40mm dia nominal bore

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 100 mm

Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 20 mm diameter pipe

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 32 mm diameter pipe

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 32 mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. 32mm dia nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only

20 mm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with a floating coat of neat cement of cement and marble dust in ration of 5:2 including supply of all material, labour and T&P etc. required for proper completion of work.

Providing and applying white cement based putty of average thickness of 1 mm, of approved brand and manufacturer over the plasterd wall surface to prepare the surface even and smooth including cost of material, labour & T&P etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).

Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth not exceeding 1.5 m

Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 1.5 m but not exceeding 3 m

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes : Size 120x90 cm : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 25mm nominal bore.

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 32mm nominal bore.

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 40mm nominal bore.

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 50mm nominal bore.

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 65mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. 65 mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. 80mm dia nominal bore

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of thecover to be not less than 58 kg

Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 3989

Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS : 3989

Providing and fixing single equal plain junction of required degree . 100x100x100 mm Sand cast iron S&S as per IS - 3989

Class-150 brick work in 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc, required for proper completion of the work

Supply and filling of OBB /150mm Brick Ballast

Supply and filling of Coarse Sand

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Finishing walls with water proofing cement paint of approved make and quality on new work with three coat to give an even shade. Including supply of all material, labour and T&P etc. required for proper completion of the work.

Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory. 80 mm diameter C.I. pipe

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class II

Cement washing including supply of all materials, labour and T&P etc. required for proper completion of work. (two coat) (S.I.No.680)

R.C.C works with cement approved coarse sand and 2 cm (3/4”) gauge approved stone ballast in the proportion 1:2:4 (1 cement : 6 aggregate) in in R.C.C raft foundation and footing with 4 cm gauge approved stone ballast, excluding supply of reinforcement and its bending the same with 24 B WG binding wire and necessary centering and shuttering etc, and also including supply of all materials labours and tools and plants etc required for proper completion of works.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Wiring point for Light with 1.5 sqmm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. piano type switch & ceiling rose on 3 mm thick phenodic laminated backelite sheet etc. complete in all respect including matching colour wash.add for modular type switch in place of piano type switch.

Wiring point for fan with 1.5 sqmm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. piano type switch & ceiling rose on 3 mm thick phenodic laminated backelite sheet etc. complete in all respect including matching colour wash.add for modular type switch in place of piano type switch.

Wiring point for fresh air fan / Exhaust fan with 1.5 sqmm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. piano type switch & ceiling rose on 3 mm thick phenodic laminated backelite sheet etc. complete in all respect including matching colour wash.add for modular type switch in place of piano type switch.

Wiring point for plug with 1.5 sqmm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall, completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. piano type switch & socket etc. complete in all respect as directed including matching colour wash add for modular type switch& socket in place of piano type switch & socket.

Wiring point for Call Bell with 1.5 sqmm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall, completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. piano type switch & socket etc. complete in all respect as directed including matching colour wash add for modular type switch& socket in place of piano type switch & socket.

Supply & Fixing of power plug with 20Amp./ 250 V flush type modular socket switch on concealed MS box including supply of all material, labour T&P etc. Required for proper completion of work complete in all respect

Wiring point for H.P.M.V./ Sodium Vapour lamp with 1.5 sq mm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall, completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. etc. complete in all respect as directed including matching colour wash add for modular type switch& socket in place of piano type switch.

Supply and fixing of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.

Supply and wiring of submain with 2 number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy duty PVC conduit on surface, with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit.

S/wiring of submain with 2 no 2.5 Sq.mm FRLSH PVC insulated 1100 Volt Grade multi strand single core copper conductor cable in 20 mm dia heavy duty PVC conduit concealded in wall withone no 1.5 sq.mm FR PVC insulated 1100 Volt Grade multi strand single core copper conductor cableas earth complete in all respect

S/wiring of submain with 2 nos. 4 Sq.mm FR PVC insulated 1100 Volt Grade multi strand single core copper conductor cable in 20 mm dia heavy duty PVC conduit concealded in wall withone no 2.5 sq.mm FR PVC insulated 1100 Volt Grade multi strand single core copper conductor cableas earth complete in all respect

S/wiring of submain with 2 no 6 Sq.mm FR PVC insulated 1100 Volt Grade multi strand single core copper conductor cable in 25 mm dia heavy duty PVC conduit concealded in wall withone no 4.0 sq.mm FR PVC insulated 1100 Volt Grade multi strand single core copper conductor cableas earth complete in all respect

Supply and wiring of 4 number 16 Sq. mm. FRLSH PVC insulated 1100 V grade single core Copper conductor cable in 40 mm dia heavy guage rigid steel conduit on surface, with two number 10 sq mm single core Copper conductor cable as earth continuity wire drawn in coudit , complete in all respect.

Supply and fixing of Recess/Surface mounting round 12 Watt 15 Watt , Cut out Min 125mm, Height Min 40mm,, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr Continuous Operation, CAT- AA 1200-1500 system lumens, >110lm/W, PF>0.95, THD <10% at full load, CRI>80, with 3 years warrantee.

Supply and fixing of 2'x2' 36 watt Recess/Surface mounting LED square fitting for armstrong ceiling powder coated CRCA housing body diffuser of special polycarbonate meterial and driver set complete in all respect CAT- AA 3600-4600 system lumens, 70mm. height with fully covered diffuser type >100lm/W, PF>0.95, THD <10% at full load, CRI>80 with 3 years warrantee.

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting, 1x22 watt suitable for upto 1x LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect CAT-AA 2200 system lumens 100 lm/W, PF>0.95, THD<10%, CRI>80 Tube with aluminium heat with 3 year warrantee

S/O of LED BULB 12 watt

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 75Watt. to 90 Watt and Confirming to IP66 protection having Company LOGO Engraved complete in all respect with contractual maintenance warrantee of 5 year in all respect including Labour. CAT-AA 7500-9000 system lumens High Power LED with lenses, >100lm/W, PF>0.95, THD <10% at full load, CRI>70 with 3 years warrantee.

Supply & fixing of 32 mmX 2 m long G.I. pipe Bracket for Mounting of flouroscent/H.P.M.V/HPSV Street Light on wall including bending the pipe to the required shape 2 nos. 40mmX3mm flat iron clamps with nuts ,bolts ,washer ,painting the flat iron with primer etc. as required

S&F of Sheet enclosure surface/flush mounting fitted with 30 amp 2 pin and metal clad scrapping earth plug and socket complete in all respect Cat-B.

Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.

Supply of Ceiling Fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz,1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system BEE 5 Star rated-1200mm sweep

Supply and fixing of electronic fan regulator Modular 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Ex Fan 450 mm Sweep

Erection and testing of Fresh air/exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.

S & F surface/Flush mounting 4 ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A

S & F surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A

S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge. CAT-A

S/F 6 Amp to 32 Amp SPMCB (10 KA) CAT-A

S/F of 40 Amp. D.P. Isolator. Cat A

S&F of 100 Amp. 4P ISOLATOR CAT-A

S&F of 200 Amp. 4 Pole. MCCB (25 KA) Thermal magnetic release CAT-A

S/f of 630 Amp. Four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including cost of labour, T&P painting and other material required for proper completion of the work as per direction and satisfaction of engineer.

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length 2000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (400 sqmm 3.5 core )

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (95 sqmm 3.5 core)

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. (400 sqmm 3.5 core)

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. (95 sqmm 3.5 core)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads ,insulating with tape and making connection etc. complete in all respect as per direction of Engineer-Incharge. (400 sqmm)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads ,insulating with tape and making connection etc. complete in all respect as per direction of Engineer-Incharge. (95 sqmm)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality.

S/f of Danger Board fabricated from 10 guage M.S. sheet as per IE rules.

S & F surface/Flush mounting 6 ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A

S & F surface/Flush mounting 4 ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A

S&F of 63 Amp. 4P ISOLATOR CAT-A

S&F of 100 Amp. 4 Pole. MCCB (25 KA) Thermal magnetic release CAT-A

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 150 sqmm 3.5 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sqmm 3.5 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 150 sqmm 3.5 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 50 sqmm 3.5 core

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads ,insulating with tape and making connection etc. complete in all respect as per direction of Engineer-Incharge. 150 sqmm

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads ,insulating with tape and making connection etc. complete in all respect as per direction of Engineer-Incharge. 50 sqmm

S&F of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect.

Wiring point for Two Way Light with 1.5 sqmm P.V.C. insulated FRLSH multistrand copper conductor cable in P.V.C. pipe concealed in wall completewith one no. 1.5 sq MM multistraine cu conducter cable as earth Wire. piano type switch & ceiling rose on 3 mm thick phenodic laminated backelite sheet etc. complete in all respect including matching colour wash.add for modular type switch in place of piano type switch.

Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect. CAT-AAA 330-660 system lumens 100 lm/W, PF>0.95, with 5 year warrantee

Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect.CAT-AAA 1000 system lumens 100 lm/W, PF>0.95, with 3 year warrantee

Fresh Air Fan 200 mm Sweep

Supply and wiring of 4 number 10 Sq. mm. FRLSH PVC insulated 1100 V grade single core Copper conductor cable in 32 mm dia heavy guage rigid steel conduit on surface, with two number 6 sq mm single core Copper conductor cable as earth continuity wire drawn in coudit , complete in all respect.

S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on MDF EG/Teak Wood Board complete in all respect.

S&F of 63 Amp. 415 V DP metal clad TPN rewireable type switch fuse unit on Angle Iron Bracketcomplete in all respect.

SITC of M.S Black Pipe "C" Class (IS:1239/3589) Including Cutting, welding etc. & providing suitable flanges along with necessary fittings viz. bends, tees, reducers etc. & anti-corrosive treatment. ( Jindal / Surya / SAIL / Tata ) 200 mm dia. (min.thickness 6.3mm)

SITC of M.S Black Pipe "C" Class (IS:1239/3589) Including Cutting, welding etc. & providing suitable flanges along with necessary fittings viz. bends, tees, reducers etc. & anti-corrosive treatment. ( Jindal / Surya / SAIL / Tata ) 150 mm dia.(min.thickness 5.4mm)

SITC of M.S Black Pipe "C" Class (IS:1239/3589) Including Cutting, welding etc. & providing suitable flanges along with necessary fittings viz. bends, tees, reducers etc. & anti-corrosive treatment. ( Jindal / Surya / SAIL / Tata ) 100 mm dia.(min.thickness 5.4mm)

SITC of M.S Black Pipe "C" Class (IS:1239/3589) Including Cutting, welding etc. & providing suitable flanges along with necessary fittings viz. bends, tees, reducers etc. & anti-corrosive treatment. ( Jindal / Surya / SAIL / Tata ) 80 mm dia.(min.thickness 4.8mm)

SITC of First aid Hose reel drum with 20 mm dia, 30 m long rubber pipe shut off nozzle, 25 mm dia., gate valve complete conforming to IS: 884/444. ( SafeGuard, Lifeguard, New Age, Safex, Safe Pro )

SITC of Single headed SS Hydrant Valve comprising of 80 mm dia. Flanged bend, 63 mm dia. SS Oblique pattern landing valve conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required. ( Life Guard, Zoloto, New Age, Safe Zone, Safex )

SITC of RRL Hose 63 mm dia 15 m long complete with SS coupling conforming to IS: 636.(type-A) ( New Age, Safe Guard, Safe Pro, Safex )

SITC of SS Branch Pipe with Nozzle 63mm dia confirming IS: 903. ( Safex, Safe Guard, New Age, Safe Pro )

SITC of Hose Box of 18 SWG M.S Sheet with glass fronted door including locking arrangement to accommodate 2 nos. RRL Hose & 1 nos. SS Branch Pipe with nozzel. (EXTERNAL) ( New Age, Safe Guard, Safex )

SITC of Hose Box of 18 SWG M.S Sheet with glass fronted door including locking arrangement to accommodate 2 nos. RRL Hose & 1 nos. SS Branch Pipe with nozzel. (INTERNAL) ( New Age, Safe Guard, Safex )

SITC of Air Cushion Tank assembly 200 mm dia. 1.5m long with Air Release Valve , pressure gauge & other accessories complete in all respect.

SITC of Electrical Operated Main Fire Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 2280 LPM at 70 Mtr head. 2. Suitable HP TEFC type Squirrel cage induction motor of minimum 60 HP. suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. 3. Complete installation with Concrete Foundation ( All edges should be protected with 50mmx50mmx5mm Angle Iron ) , Common Bed Plate of Iron Channel, Coupling , Coupling Guard,Vibration Pads etc. complete work as per requirement. (Make:- Kirloskar/other standard make.)`

SITC of Diesel Engine Driven Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 2280 LPM at 70 Mtr head. 2. Suitable HP, 1500 RPM, minimum 60 HP, Water Cooled, Auto start mechanism Diesel Engine with flexible coupling, Exhaust pipe insulatedwith 50 mm Glass wool with 1.0 mm thick Aluminium sheet cladding, with silencer etc.Confirming pollution Norms. 3. Complete installation with Concrete foundation ( All edges should be protected with 50mmx50mmx5mm Angle Iron ) and Common Bed Plate of iron channel etc. for mounting the Diesel Engine and Pump. Complete in all respects. (Make:- Kirloskar/other standard make.)`

SITC of Electrical Driven Jockey Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 180 LPM at 70 Mtr head. 2. Suitable HP TEFC type Squirrel cage induction motor of minimum 10 HP. suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. 3. Complete installation with Concrete Foundation ( All edges should be protected with 50mmx50mmx5mm Angle Iron ), Common Bed Plate of Iron Channel, Coupling , Coupling Guard,Vibration Pads etc. complete work as per requirement. (Make:- Kirloskar/other standard make.)`

SITC of Electrical Driven Terrace Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 450 LPM for maintaining minimum Pressure of 3.5 kgf/Cm2. 2. Suitable HP TEFC type Squirrel cage induction motor of minimum 10 HP. suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. 3. Complete installation with Concrete Foundation ( All edges should be protected with 50mmx50mmx5mm Angle Iron ), Common Bed Plate of Iron Channel, Coupling , Coupling Guard,Vibration Pads etc. complete work as per requirement. (Make:- Kirloskar/other standard make.)`

SITC of Automatic Starter Panel Suitable for Terrace Pump 10 HP. Complete in all respects.

SITC of GM Fire brigade 4 way Inlet connection. 63 mm dia. Complete in all respect. (Firex, Safex, NewAge, Safe Pro )

SITC of Double Flanged Sluice Valve of PN 1.6 with non rising Stem complete with nuts, bolts, washers, gaskets and conforming to ISI/14846 . (200 mm Dia.) ( Zoloto, Kirloskar, L & T )

SITC of Cast Iron double flanged Non Return Valve of PN 1.6 complete with nuts, bolts and washers conforming to IS 5312. ( Zoloto, Karatar, ) 150 mm dia.

SITC of Cast Iron double flanged Non Return Valve of PN 1.6 complete with nuts, bolts and washers conforming to IS 5312. ( Zoloto, Karatar, ) 100 mm dia.

SITC of C.I double flanged Butterfly Valve of PN 1.6 complete with nuts, bolts & washers etc. conforming IS 780 ( Zoloto, Kirloskar, L & T ) 150 mm dia.

SITC of C.I double flanged Butterfly Valve of PN 1.6 complete with nuts, bolts & washers etc. conforming IS 780 ( Zoloto, Kirloskar, L & T ) 100 mm dia.

SITC of C.I double flanged Butterfly Valve of PN 1.6 complete with nuts, bolts & washers etc. conforming IS 780 ( Zoloto, Kirloskar, L & T ) 80 mm dia.

SITC of Pressure Switch. Complete in all respect.

SITC of Pressure Gauge. Complete in all respect.

S/F of GI Pipe 50 mm Dia with Accessaries to supply water from Pump room to Tarrace tank

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm. Dia. ( Zoloto, Honeywell, Karatar )

Supply and fixing of Fire Bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.

SITC of lionization Smoke Detector as per specifaction including making connections with wire. ( Honeywell, Bosch, Siemens, Safeguard, Cease Fire, Safepro )

SITC of Heat Detector ROR Type as per specification including making connection with wire. ( Honeywell, Bosch, Siemens, Safeguard, Cease Fire, Safepro )

SITC of Responsce indicator pul stanting type suitable for including connection. ( ABC Fire, Safepro, Honeywell or Equivalent)

SITC of Electronic LMT Hooter, housed in MS housing suitable for wall mounting/ceiling, including making connection. ( Honeywell, Bosch, Safeguard, Safepro )

SITC of Manual Call point Break Glass type housed in MS sheet, including connection. ( Honeywell, Safeguard, Safepro, ABC Fire )

SITC of 10 Zone Fire Alarm main control panel Microprocessor based with Public Address System. complete in all respect. ( HoneyWell, Safeguard, Safepro, Bosch, Morley )

SITC of 6 Zone Fire Alarm local control panel Microprocessor based with Public Address System. complete in all respect. ( HoneyWell, Safeguard, Safepro, Bosch, Morley )

Supply and wiring of Submain with two number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire etc, complete in all respect.

Supply & laying/fixing on surface of 10 core 1.5 Sq mm Copper Cable. Complete in all respect.

Supply and laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 Sqmm 4 Core

Supply and laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25 Sqmm 3.5 Core

Supply and laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 120 Sqmm 3.5 Core

Supply and fixing of brass nickle plated Compression Gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 10 Sqmm 4 Core

Supply and fixing of brass nickle plated Compression Gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 25 Sqmm 3.5 Core

Supply and fixing of brass nickle plated Compression Gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 120 Sqmm 3.5 Core

Supply and fixing of plain or pin type copper tin plated Cable Socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 10 Sqmm

Supply and fixing of plain or pin type copper tin plated Cable Socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 25 Sqmm

Supply and fixing of plain or pin type copper tin plated Cable Socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 120 Sqmm

Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length 2000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra)

Supply and laying of 25mm X 3 mm G.I. strip from earth electrode directly in the ground as required. Complete in all respect.

Supply and fixing of C02 type Fire Extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. ( Safe Pro, Eco Fire, Safex, Cease Fire, Reliance, Newage )

Supply and fixing of Fire Extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. ( Safe Pro, Eco Fire, Safex, Cease Fire, Reliance, Newage )

Wiring point for Light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, GP Box , Piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.

Wiring point for Plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, GP Box , Piano type switch and socket etc. complete in all respect including matching colour wash.

Wiring point for Fan with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, GP Box , Piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash.

Wiring point for Exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit with 1.5 sq. mm. FRLSH insulated multistrand copper conductor cable as earthwire drawn inside the conduit, GP Box , 15 A Piano type switch and ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect including mathcing colour wash.

Wiring point for H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. and 15 A Piano type switch etc. complete in all respect including matching colour wash.

Supply and wiring of 16 gauge M.S. drum duly painted including making holes in the wall for exhaust fan and finishing properly complete in all respect.

Supply and fixing of surface / Flush mounting 12 ways SPN Distribution Boardwith additional metal door without MCB complete in all respect and as directed at site.

Supply and fixing of 63 Amp. D.P.Isolator

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy duty (2mm thick) PVC conduit on surface, with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor as earth continuity wire drawn inside the conduit , complete in all respect.

Supply and fixing of Electronic fan regulator (Piano) 120-280 V ISI marked on the existing switch board including making connection , required material, labour T&P etc for proper copmletion of work to the satisfaction of engineer in charge of work

Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set sutable for 40 Watt to 50 Watt conferming to IP 65 and above protection complete in all respect on wall.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supply and fixing of LED tube light with batten suitable for up to 1x22 Watt LED tube Light complete including tube etc on Surface complete in all respect

Supply and fixing of 10Watt LED Bulb

Errection and testing of Ceilling Fan

Supply of Ceiling Fan

Supply of Exhaust Fan

Construction of one No. Pump House of Size 5.0 X 4.5 X 3.2 Mtr.

Tube Well with boring, 5HP Submersible Pump complete with all respect

Underground water RCC tank 100000.00 Ltr Capacity

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm with min. sheet thickness 3mm) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. Base plate 250 mm X250mmX16mm PCD 250mm J type foundation bolt M24X750mmX4Nos.

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 110Watt. to 130 Watt and Confirming to IP66 protection having Company LOGO Engraved complete in all respect with contractual maintenance warrantee of 5 year in all respect including Labour. CAT-AA 11000-13000 system lumens, High Power LED with lenses, >100lm/W, PF>0.95, THD <10% at full load, CRI>70, Avg Life Class 50000Hrs@L70,driver Set (NotCircuitory) with BIS No written on it, fitting itself suitable for 50-55mm OD pipe

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 Sq.mm 4 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 Sq.mm 4 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.

SITC of UTP Cabling CAT-6

SITC Input / Output Jack

SITC Input / Output Face plate

SITC 24 PORT CAT-6 Patch Pannel

SITC RJ45 TO RJ45 CAT-6 UTP Patchcord with transparent Boot ( min. 1Mtr )

SITC of 9 u wall mountable open rack with front glass with 3 Socket 6/16 A

SITC Cable organiser

SITC of Procurve switch 2510 - 24 Port 10/100 MBPS

SITC of online UPS 5KVA

SITC of Split AC unit of 2.0 T Capacity, Inverter Technology, 5 Star rating including standard length of Copper pipe , Cable, Remote etc. complete in all respect ( Hitachi , Daikin , Mitsubishi or Equivalent )

S/F of Copper pipe @ 5 mtrs. Per A.C.

S/F of power lead from inner to outer unit of A.C. @ 5 mtr. Per A.C.

S/F of drain pipe 1.25" @ 10 mtrs. Per A.C. Including TEE, Elbow , Clamp etc.

S/F of MS stand for outdoor unit of Split AC.

S/Fof Wall mounting Voltage Stablizer Suitable for upto 2T capacity AC (Range 130-280 Volt) (V Guard, Microtek, Luminous)

Supply, installation, testing and commissioning of Silent type Diesel Generating set of prime power rating of 125 KVA, 3 phase, 50 Hz, 415 Volts at 1500 rpm , 0.8 lagging power factor and 0.85 Load factor with suitable RCC Foundation, fuel tank, insulated Exhaust pipe , battery, AMF Panel Consisting of the following and confirming latest BIS Norms. Complete in all respect. Diesel engine 4 Stroke water cooled 1500 rpm suitable for 125 KVA output alternator capable for 10 % over loading for one hour after 12 hours of continous operation Instrument panel with start/stop switch with key and digital display of water & lubricant Temprature, rpm, over speed, lubricant pressure & level , running hrs. Self Excited and self regulated through AVR Synchronous Alternator rated at 125 KVA

Raj and Co.