Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest quoting | |
| 2 | L2₹34.3 L+₹2.6 L (8.20%)Rejected-AOC | L2 | Rejected-AOC Rejected being higher quoting | |
| 3 | L3₹34.7 L+₹3.0 L (9.46%)Rejected-AOC | L3 | Rejected-AOC Rejected being higher quoting | |
| 4 | L4₹36.3 L+₹4.5 L (14.3%)Rejected-AOC | L4 | Rejected-AOC Rejected being higher quoting | |
| 5 | L5₹39.6 L+₹7.9 L (24.8%)Rejected-AOC | L5 | Rejected-AOC Rejected being higher quoting |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Hisar
Garrison Engineer Hisar Military Station Hisar 125006
CA No GE(H)-26/2022-23 REPAIR / REPLACEMENT TO JOINERY/ CARPENTRY AND ALLIED WORKS THROUGH DAY TO DAY MAINT OF MARRIED ACCN DSTV IN THE AOR OF AGE B/R I UNDER GE HISAR AT HISAR MIL STN
2022_MES_543859_1
CA No GE(H)-26/2022-23
Open Tender
Civil Works
Item Rate
270 days
Hisar Mil Stn
As per Tender documents
6 documents required · 6 mandatory
₹500
GE Hisar
₹80,000
Yes
12 Sept 2022
6 Aug 2022
5 Sept 2022
6 Aug 2022
3 Sept 2022
21 Aug 2022
Amount
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.
Dismantling boarding, any description, fixed in any position with nails complete all as directed.
Taking down shutters of any description, exc 1sq.m and n.exc 2 sq.m each and removal from site etc complete all as specified and directed.
Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.
Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.
M&L for PCC 1:3:6 type C1, using 20mm graded crushed stone aggregate as in filling up chowkat hollows, hold fasts, bed block and similar works as directed, complete, all as specified.
S & F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.
S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed.
S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications etc complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour sheets for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement.
S&F stainless steel butt hinges of size 100mm medium weight, ISI marked complete all as specified.
S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.
S&F extruded aluminium alloy handle, 150mm size, fabricated type, anodized (ISI marked) complete all as specified.
S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.
S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
S&F hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
S&F magnetic door catcher complete all as directed.
Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.specified.
Supply and fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.specified.
S&F 18mm thick solid PVC boards, plain colour PVC sheet having density 500 Kg/Cum, fixed with screws to timber or iron frame work including suitable size PVC fillets to cover the front edge of board and suitable size of wooden cleats fixed as in cupboard shelves complete all as specified and as directed.
S&F in repair / replacement 35-40mm thick Plywood, grade BWR, type BB, fixed with nails / screws to wooden / steel frame work as used in any type of repair work to wooden doors and similar work with and including necessary cutting & welding to existing steel door frame and necessary carpentry works for proper functioning of wooden shutter complete all as specified and directed.
S&F in repair 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 as in sheet lining to wooden door fixed with brass CP screws of suitable size all as directed.
S&F in repairs mild steel box type hinge (02 Nos) of size 50mm and 100mm long mild steel handle (left / right) fixed with nut & bolt, screws and washers including suitable hold fast & peg stay suitable for factory made steel windows / ventilators including necessary cutting, welding and blacksmith work for re-alignment of window shutter along the window frame for smooth functioning for closing & opening of shutter with and including taking down shutter and re-fixing the same in position with window/ventilator frame complete all as specified and directed.
S&F in repairs butt hinges of size 125mm medium weight, cold rolled mild steel including taking down shutter and re-fixing the same in position with door frame including necessary cutting, welding to existing steel door frame and necessary carpentry work for proper functioning of wooden door shutter complete all as specified.
S&F in repairs butt hinges of size 150mm heavy weight, cold rolled mild steel including taking down iron shutter of garages and re-fixing the same in position with iron door frame including necessary cutting, welding to existing steel door frame and necessary blacksmith work for proper functioning of iron door shutter complete all as specified.
S&F steel ventilator, with top hund shutter including box type hinges, fixed handle and steel peg stay with and including one shop coat of zinc chrome primer complete all as specified.
S&F mild steel framed work as in steel frames, chowkats, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.
S&F cupboards/wardrobes, factory made, frame shall be of 1.25mm thick pressed steel with PBI sheet of size 90x70mm, shutter shall made out of 1mm thick pressed steel with 06 Nos 100mm long 3.15mm thick steel hinges, standard pattern rim lock with complete locking arrangement including 12mm vertical rod shall be provided (brass mortice lock, vertical type, size 65mm, 2 levers, ISI marked with escutcheon plate and two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with minimum 6 Nos 12mm dia mild steel bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original with CM (1:4) or PCC (1:2:4) type B0 complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.
S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete as specified & as directed. Note :- Rates quoted deemed to include S&F of hinges, lugs, lock strike plate.
S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete as specified & as directed. Note :- Rates quoted deemed to include S&F of hinges, lugs, lock strike plate.
S&F in replacement factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete including necessary cutting & welding to existing steel door frame and necessary carpentry works for proper functioning of wooden shutter complete as specified & as directed. Note :- Rates quoted deemed to include S&F of hinges, lugs, lock strike plate.
S&F in replacement factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete including necessary cutting & welding to existing steel door frame and necessary carpentry works for proper functioning of wooden shutter complete as specified & as directed. Note :- Rates quoted deemed to include S&F of hinges, lugs, lock strike plate.
M&L for glazed ceramic designer & pattern (dark & light shade) jointfree tiles (coloured) premium quality, 300mm x 200mm x 7mm thick, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant primer of same make all as specified & as directed.
S&F 3mm thick polystyerne sheet (PS) transparent in square/rectangular not exc 0.5 sqm in each pane fixed / lock with window frame by using PVC snap beading with necessary self tapping reviting / screwing and suitable method with and including hacking out old broken glass (any thickness, size, quality or description) from any type of window / door glazed with putty or fixed with beads complete all as specified and directed.
Securing glass of any description in exiting metal frame glazed with oil putty in square / rectangle not exc o.5 sqm in each pane including removing loose or decayed putty, rebeading /reputting and painting to match existing work etc complete all as specified and directed.
Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
Supply and fixing 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M/S D.N Choudhary
DALMIA CONTRACTORS
Puja Traders
M/S RAJESH KUMAR & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .