Karnataka

AOC

Works

Buildings

CONSTRUCTION OF SHADI MAHIL (SAMUDAYA BHAVAN) AT SARSAMBA VILLAGE IN ALAND TALUKA(Under 8443) for the year 2025-26

Public Works Department

PWD Division Office Kalaburagi | Kalaburagi, Karnataka

Amount: ₹21.2 LCloses: 8 May 2026Closed

Timeline

Published30 Apr 2026
Closed8 May 2026
Awarded—

Bids

1 Bid8 May 2026

#	Company	Amount	Status
1	ANAND ₹21.1 Laccepted-aoc	₹21.1 L	accepted-aoc

Tender Value

₹21.2 L

EMD Value

₹43,000

Closing Date

8 May 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Rahul Kambale

Office Number

Mobile Number

Work Description

CONSTRUCTION OF SHADI MAHIL (SAMUDAYA BHAVAN) AT SARSAMBA VILLAGE IN ALAND TALUKA(Under 8443) for the year 2025-26

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT34954

Reference Number

PWD/2025-26/BD/WORK_INDENT34954

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Kalaburagi

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Financial turnover Certificate having UDIN

RequiredPWD Contractor registration certificate Class- IV,III, II, I and above

RequiredOne Similar nature of Work Done such as Building work Certificate 50 percent of amount put to tender with Work Indent Number

RequiredLess DD from Nationalised Bank only

RequiredAny Other documents

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

EMD RS.43,000.00 Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive).

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification.

The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason.

The defect liability period for this work is 365 days from the date of actual completion of work satisfactorily

The Department is not responsible for any delay in accessing kppp portal.

The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts

The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules and any modifications before and after execution of agreement

After the award of the contract, the contractor has to furnish the details in respect of labour employed and the EPF details for this work in every RA bill.

Bidders are advised to note that , 18% GST will be added to the contract amount.

Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2025-26 in the Technical Qualification Criteria mentioned in the next section.

If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause.

The work should be completed in 06 Months ( including monsoon)

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 ,2022-23, 2023-24 , 2024-25 & 2025-26 (a) achieved in at least two financial years an average financial turn over (in all cases of civil engineering construction works only) Rs. 21.17 Lakhs of civil engineering construction works only

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 ,2022-23, 2023-24 , 2024-25 & 2025-26 (b) satisfactorily completed as prime contractor, at least One Such Similar Nature of Work SUCH AS BUILDING WORK OF value not less than Rs. 10.60 Lakhs

If the bidder quoted lesser rates, he has to upload the difference amount in the form of DD only duely scanning and uploading the same in the e-portal at time of tenderer submitting the bid and original shall be submitted to this office at the time of tender opening. Failing which his bid will beliable for rejection. (DD Only National Banks)

Maximum value of civil engineering works executed in any one year during the last five years (updated to2026-27 price level) taking into account the completed. Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited.

Fee & Financial Details

Tender Fee Amount

₹530

EMD Fee Amount

₹43,000

Important Dates

Last Activity

8 May 2026

Published

30 Apr 2026

Download Ends

7 May 2026

BOQ Preview

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ce...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and d...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ...

•

Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick incl...

•

Providing and fixing bright finished brass hanging type floor door stopper

•

with necessary screws, etc. complete.

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. complete

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plat- ing and fixing with necessary screws etc., complete. Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

•

Centering & shuttering charges Centering Charges 3%

•

Centering & shuttering charges Centering Charges 70%

•

Centering & shuttering charges Centering Charges 50%

•

Centering & shuttering charges Centering Charges 60%

•

Centering & shuttering charges

•

Centering Charges 45%

•

Centering & shuttering charges

•

Centering Charges 50%

•

ELECTRICAL WORK

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,

•

metal/PVC junction boxes, adhesive paste etc., and runningbefore ...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

•

Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x17...

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

•

Supplying and drawing Flexible Multicore Cable

•

manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5S...

•

Supplying and drawing Flexible Multicore Cable

•

manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5S...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

•

Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw2 -34954.docx

Tender Document • 1.48 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ANAND

₹21.1 Laccepted-aoc