SPECIAL REPAIRS TO BLDG NO T 27 ADJACENT TOILET AND TO PATH SEWAGE LINE AND SEPTIC TANKS AT CQA A COMPLEX AND MARRIED ACCOMODATION UNDER GE C KIRKEE

Amount

Cleaning of existing manhole any size, shape and depth n.exc. 0.50 mtr from the ground level and getting out mud, sludge etc and scrapping/ washing the manhole with fresh water and cleaning the bottom and side walls of manholes with wire brush including disposing the sludge /rubbish to a distance exc. 1.5 KM but not exc. 5.0 KM complete all as specified and as directed.

Cleaning of existing septic tank/soak well of any size and any shape from the ground level and getting out mud, sludge etc and scrapping/ washing with fresh water and cleaning the bottom and side walls with wire brush including disposing the sludge /rubbish to a distance not exc 50 mtr and spreading bleaching poweder on disposed material complete all as specified and as directed.

Cleaning of existing sewer line of any size with fresh water including disposing the sludge /rubbish obtained during cleaning the sewage line to a distance not exc 50 mtr complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foudations etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in any type of rock complete all as specified and directed.

Excavating over areas, in hard rock exc 1.5 m deep and getting out complete all as specified and directed.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard / dense soil etc complete as specified as directed.

Removing the excavated material to a distance exc. 1.5 KM and n.exc. 5 KM and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed.

Demolition and breaking up of 150 mm dia drain pipes(Salt glazed stone ware, AC or Reinforced cement concrete) with bed concrete set in cement mortar including removing debries out side MD land all as specified and as directed.

Demolition and breaking up of 200 mm dia drain pipes(Salt glazed stone ware, AC or Reinforced cement concrete) with bed concrete set in cement mortar including removing debries out side MD land all as specified and as directed.

Demolition and breaking up of 300 mm dia drain pipes(Salt glazed stone ware, AC or Reinforced cement concrete) with bed concrete set in cement mortar including removing debries out side MD land all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above GL) removal of rubbish/debris out side MD land complete all as specified and as directed.

Plain Cement Concrete as in foundation filling and mass concrete, type C-2, (1:3:6), using 40 mm graded stone aggregate complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-1 ,using 40mm graded stone aggregate as in surfaces channel and drains etc., complete all as specified and directed.

Plain Cement Concrete (1:2:4) type B-2 using 20mm graded stone aggregate as in bands, coping, bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in modular bricks in cement mortar (1:4) complete all as specified and as directed.

Plain cement concrete, (1:3:6), type C-2 using 40 mm graded stone aggregates as in bed to drain pipes suitable for 150 mm bore pipe including packing under, and haunching against the sides of drain pipes after they are laid and tested complete all as specired and as directed.

Plain cement concrete, (1:3:6), type C-2 using 40 mm graded stone aggregates as in bed to drain pipes suitable for 200 mm bore pipe including packing under, and haunching against the sides of drain pipes after they are laid and tested complete all as specired and as directed.

Plain cement concrete, (1:3:6), type C-2 using 40 mm graded stone aggregates as in bed to drain pipes suitable for 300 mm bore pipe including packing under, and haunching against the sides of drain pipes after they are laid and tested complete all as specired and as directed.

Reinforced cement concrete drains pipes, class NP3, 300 mm internal dia laid and jointed complete with collars, including concrete bed to drain pipes forming cradles all as specified and as directed.

Reinforced cement concrete drains pipes, class NP3, 200 mm internal dia laid and jointed complete with collars, including concrete bed to drain pipes forming cradles all as specified and as directed.

Reinforced cement concrete drains pipes, class NP3, 150 mm internal dia laid and jointed complete with collars, including concrete bed to drain pipes forming cradles all as specified and as directed.

Precast cement concrete, type B-1, (1:2:4) using 20 mm graded stone aggregates set in CM (1:6) as in cover slabs and similar works including formwork complete all as specified and as directed. NOTE:- Reinforcement shall be measured measured and paid seperately.

TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Rendering 15mm thick on fair faces of brick masonry or concrete surface of wall in CM(1:4) finishing the surfaces even and smooth without using extra cement mixed with approved water proofing compound complete all as specified and directed. NOTE :- WPC will be measured and paid separately.

15mm thick cement plastering in CM (1:6) on other than fair face of brick surface finished even and smooth without using extra cement all as specified and as directed.

Supply only integral liquid water proofing compound all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required for 150 mm bore pipe all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including form, moulds, mitred/stopped ends etc complete all as specified and as directed.

Reinforced cement concrete (nominal mix) in type B1 (1:2:4) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in cover of septic tank and the like all as specified and as directed.

Plain Cement Concrete as in foundation filling and mass concrete, type D-2, (1:4:8), using 40 mm graded stone aggregate complete all as specified and as directed.

Hard core of guage n.exc. 63mm deposited spread and levelled, laid in layers n.exc. 15cm thick, watered and rammed to a true surface using broken boulders all as specified and as directed.

Rubber moulded coloured interlocking paver blocks of 60mm thick Ist quality machine made as in floors / pavements / parking including sand cushioning of 25mm thick (compacted thickness) fine seive, including finishing the sides with PCC type B0 using 12.5mm graded stone aggregate complete all as specified and as directed.

Customised coloured chequered tiles (zigzag) of size 300 x 300 x 10-15 mm thick, set, jointed and pointed in neat cement slurry as in floors with using grey cement and with pigment including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Plain cement concrete, type B1 (1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar articles such as bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed.

Taking down chowkhats or frames area not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames with shutters area exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Factory made pressed steel frames of size 105 x 60mm for doors with one or more rebates(02 rebates) including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.

40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, with both faces covered with decorative face veneers with lipping / frame to match complete all as specified and as directed.

Plain cement concrete, (1:2:4), type B-0, using 12.5 mm graded stone aggregate as in filling of hold fast, coping, for filling in steel frames complete all as specified and as directed.

300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed.

150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Butt hinges of size 100mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized type B-21 complete all as specified and as directed.

Mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, MS 10mm squrare guard bars, Glazing bar devotailed or welded for receiving glass and including cutting holes in wall for fixing the window with hold fast in PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) and makding good the disturbed surfaces in CM (1:4) and with the existing finishes to match complete all as specified and as directed.

3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc. 0.50 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

Factory made solid PVC double moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawings.

20-25 mm thick machine cut Kota stone slab over and including 20mm thick screed bed in cement mortar (1:4) with roughening of surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed including dismantling the old tiles of any type complete all as specified and as directed.

Plain Cement Concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick including dismantling the existing sub base complete all as specified and as directed.

20-25 mm thick machine cut Kota stone slab on verticle surfaces as in skirting/dado over and including 10mm thick backing coat in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing, polishing and dismantling of old tiles complete all as specified and as directed.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in section all as specified and as directed.

Rolled mild stee as in framed brackets of angles or tees with web and flanges cut to shape, drilled and counter shunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n.exc. 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

15 mm thick rendering on other than fair face of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land complete all as specified and directed.

20 mm thick rendering on other than fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

5mm thick rendering on ceiling surfaces of concrete in cement mortar (1:3) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Plain Cement Concrete, PCC (1:3:6) type C2, using 40mm graded stone aggregate, 75mm thick, as in plinth protection, paving, footpath and finished the surface even and smooth without using extra cement including demolition of existing concrete complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old sheeting of any type complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old sheeting of any type complete all as specified and as directed.

Preparation of new plaster surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of oil bound emulsion distemper of approved tint over a coat of alkali reistant primer and one coat of 1mm thick putty on walls complete all as specified and directed.

Precast cement concrete block masonry with solid blocks,type C1, (1:3:6) using 20 mm graded stone aggregates, exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

Preparation of newly plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered wall surfaces of any description and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified and as directed.

Complete removal of existing treatment on walls and preparation of plaster surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of cement based paint of approved tint over a coat of alkali resistent primer complete all as specified and as directed.

3 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exe 0.50 Sqm in each pane complete all as specified and as directed.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) including dismantling the old tiles of any type complete all as specified and as directed.

Glazed ceramic coloured tiles of size 450x350x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick backing coat in CM (1:3) including dismantling the old tiles of any type complete all as specified and as directed.

Vitreous china two bowl urinal half stall type fixed in repairs 400mm size including bowl, pipe and cistern, providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; supply and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.

Brass chromium plated bottle traps 40mm suitable for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

Flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed.

Vitreous china squatting pan, Orissa pattern water closet (white) of size 580x440mm with integral foot rests, excluding flushing cistern and flush pipe complete including connection to trap and flushing pipe antisyphonage pipe etc , 450mm PVC connection ,PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, provision of PCC (1:7:12) type F2 in filling ,complete all as specified and as directed.

Vitreous China wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with coloured PVC seat cover and making all necessary connections, PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle all as per Parryware Cat No. C0278 for water closet, Cat No. C8071 for EWC, Standard for PVC seat cover or techno commercially equivalent makes specified in PS complete as specified and as directed.

Rotational moulded polythene triple layered water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 1000 ltrs, 20mm bore PTMT float and ball valve set including providing necessary connections after disconnecting and demolition of existing RCC/PVC tank with platform complete all as specified and as directed by the Engr-in-Charge.

15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors including taking up old pipe complete all as specified and as direcetd.

20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors including taking up old pipe complete all as specified and as direcetd.

Plain Cement Concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in floors, 25mm thick finished even and smooth with out using extra cement complete all as specified and as directed.

Water proofing treatment over RCC roof slab by applying oil based bituminous primer on surface @ 0.25 kg/sqm and laying 3 mm thick APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.5 kg/sqm reinforced with non woven polyster reinforced mat weighing not less than 160 gms/sqm, polyster core having soften point not less than 1500C, longitudinal tensile strength not less than 650N/5cm, laid by torching method and applying a coat of solar reflective alumunium paint @ 0.15kg/sqm on membrance surface including 24hrs ponding test complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

110mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

110mm bore PVC (SWR) bends, type 'B' with access door complete all as specified and as directed.

PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.

PVC (SWR) floor trap (ISI Marked), outlet with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1, using 20mm graded stone aggregate and making good the disturbed surface to match with existing complete all as specified and as directed.

100mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed.

Bib taps long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe all as per Prayag Cat Part No :8308 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and as directed.

15mm bore angular stop cock (concealed type) made of brass chromium plated screwed both ends for iron pipe all as per ssco Cat No DLX-526 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and as directed.

Vitreous china wash hand basin, white flat back of size 550 mm x 400 mm including a pair of cast iron brackets embedded in PCC(1:3:6), type C-1 blocks of size 10 x 7.5 x15 cm with and including 32 mm dia PVC waste pipe, 32mm dia chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement, including supply and fixing of 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron and 450mm PVC connection fixed complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good the disturbed surface complete all as specified and as directed.

Rolled mild steel as in angle iron posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Rolled mild steel flat iron of size 40 x 6mm for fixing chain link fencing with post and MS round bars 10mm dia for inserting in mesh including hooking etc complete all as specified and as directed.

Supply only chain link MS galvanised fencing of 50 x 50 size mesh made out of 3mm dia wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire and dismantling of old fencing wire mesh complete all as specified and as directed. NOTE :- Supply of chain link shall be measured and paid separately under relevant items.

Rolled mild steel screw bolts 5 to 10mm dia for shank(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt not exceeding 5cm long complete all as specified and as directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

Precast chequered cement concrete tiles, rubber moulded 300 x 300 x 25mm thick set and jointed in neat cement slurry and pointed with cement mortor laid over and including 20mm thick screed bed in CM (1:4) and 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of floors complete all as specified and as directed.

25mm thick Plain cement concrete, type B-0, (1:2:4) using 12.5mm graded stone aggregate including spike roiling to surfaces or making impressions of expanded metal, whilst the concrete is green including demolition complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and as directed.

Taking down MCBs with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Point wiring with 1100 volts grade, single core PVC unsheathed FRLSH cable with multistranded copper conductor 1.5 sq.mm drawn in and including electrical grade PVC conduit 20mm dia medium grade in concealed wiring including PVC insulated unsheathed earth wire with copper conductor of size 1.5 sq.mm and including laminated sheet 3mm thick with sunkun board complete all as specified and making good disturbed surfaces for:- a) One Light point controlled by one, one way switch. NOTE:- Quoted rate shall include necessary cutting chasing and making good the surfaces.

b) One Exhaust fan point controlled by one switch complete all as specified and as directed.

Switch Piano flush button single pole one way 6 Amps complete all as specified and as directed.

Point wiring with 1100 volts grade, single core PVC unsheathed FRLS cable with multistranded copper conductor 1.5 sq.mm drawn in and including electrical grade mettalic stove enamelled conduit 20mm dia in concealed wiring including PVC insulated unsheathed earth wire with copper conductor of size 1.5 sq.mm complete all as specified and making good disturbed surfaces for:- a) One Light point controlled by one, one way switch. NOTE:- Quoted rate shall include necessary cutting chasing and making good the surfaces.

b) One Exhaust fan point controlled by one switch

Flame proof, weather proof, rotary switch with On-Off indication 16 Amps capacity, Single pole 250 volts complete all as specified and as directed.

Exhaust fan 457mm sweep, flame proof, water poof, AC, flame proof certified by CMRI, Dhanbad, operating on 230 volts complete all as specified and directed. MAKE :- Sudhir, model EF/140 or techno commercially equivalent.

Exhaust fan 450 mm sweep, heavy duty, AC 230 volts, 1400 RPM, complete all as per Crompton EXHD 450-4-1 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Ceiling rose PVC/Polycarbonate two to three terminals/plate including back plate complete all as specified and as directed.

Sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar, double door flush/surface mounting, including wooden board complete all as specified and as directed.

LED mirror light high brightness 9 Watts, 230 volts with all accessories in one fixture complete and including connecting up with twin core twisted flexible copper conductor cable with suitable size of required length from ceiling rose to mirror light fitting all as per Havells Cat No. LHESABP7IN1W009 9W Ivory LED or techno commercially equivalent in Phillps / CG complete all as specified and directed. .

MCB SPN 240 Volts, 40 Amps 10 KA breaking capacity 'C' series complete all as specified and as directed.

MCB single pole 240 volt 5 to 32 amps 10 KA breaking capacity 'C' series complete all as specified and as directed.

High efficiency LED aluminum linear batten tube with high brightness 20 watts, 2 feet , 230 volts with control gear and all accessories in one fixture complete and including connecting up with twin core twisted flexible copper conductor cable with suitable size of required length from ceiling rose to tube light fitting complete all as per Havells Cat No. LHEXARP7IN1W020 pride plus or techno commercially equivalent in Phillps / CG complete all as specified and directed.all as specified and directed.

Building security light fitting 45 watt LED with pre die cast aluminium housing, toughened glass and accessories complete incl street light bracket made out of 40 mm dia GI medium grade pipe 1.2 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat, nuts, bolts & washer including painting to clamps with two coats of aluminium silver paint over a coat of primer all as per Havells Cat No. ENDURA PRARL NEO SL45WLED757PASYTOPC or techno commercially equivalent in Phillps / CG complete all as specified and directed.all as specified and directed.

FLP/WP enclosure for MCB DB panel in cast aluminium alloy LM6 finishing with epoxy powder coated grey colour paint inside & outside with rotary switch type MCB's and cable entry Terminal box complete with all accessories confirm to IS:2148/2004 of following:- [a] Incomer :MCB 40 Amps SPN - 01 No (Rotary type switch) [b] Outgoing :MCB 6 to 32 Amps SP - 6 Nos (Rotary type switch)

CMRI Certified LED flame proof 2 x 20 Watt LED tube light fixture all as per Crompton Cat no-EXTN2LT8-20 or techno commercially equivalent in Sudhir / CG complete all as specified and directed.

Sub main wiring with four run single core 6 sq,mm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in concealed stove enameled pipe of suitable size with and including 6 sq.mm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-four runs of 6 sq.mm, one run of earth wire and one run of conduit pipe with accessories and one length of cutting chasing shall be measured as one unit length for payment purpose.

Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

Aluminium strip of size 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed.

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including, 3 Nos, 8mm dia 25mm long hex, head screw complete all as specified and directed.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthling lead of 32X6 mm GI strip all as shown in Plate No. 4 to the earthing test point all as specified and indicated onnected to main board/distribution board/test point all as specified and directed (The rate is including necessary earth work, PCC, chamber cover, watering pipe, wire mesh etc complete.) including testing on completion complete all as specified and as directed.

Epoxy base insulator of size 40mm height fixed on walls/ PCC block/on floor/on MS angle/on towers etc all as specified and as directed.

XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 10 sq.mm, 2 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft loose soil complete all as specified and as directed.

Providing seived soil, free from particles as in cushioning for protection of cable as per IS punned down all as specified and directed.

Cable covers of size 250mmx150mmx40mm, LV class for protection of cables complete all as specified and directed

Removing of excavated material in solis not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed.

Galvanised iron tubing, light grade, 40mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., complete all as specified and as directed.

ShreHari Civil Enginneering and Contractors

Raj Associates

Shri Sant Cosntruction

M/S JAYCONSTRUCTION CO

S.R.M.K Enterprises