Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹39.5 L+₹1.2 L (3.22%)Rejected-Finance 1 NANGAL JAISA BOHRA DADI KA PHATAK JAIPUR RAJASTHAN 302012 | JAIPUR | RAJASTHAN | 302012 | L2 | Rejected-Finance L2 | |
| 3 | L3₹41.3 L+₹3.0 L (7.82%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹44.3 L+₹6.0 L (15.8%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹45.4 L+₹7.1 L (18.5%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹43.6 L
EMD Value
₹87,200
Closing Date
21 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JAIPUR
Garrison Engineer, Military Engineer Services, Khatipura road, Jaipur 302012
SPL REPAIR TO BLDG NO. P-481 (ORS MD ACCN) OF CAV UNIT UNDER AGE B/R-I AT JAIPUR MIL STN
2022_MES_545176_2
GE/J-36/2022-23
Open Tender
Civil Works
Item Rate
270 days
JAIPUR
As per NIT
5 documents required · 5 mandatory
₹500
GE JAIPUR
₹87,200
Yes
7 Oct 2022
1 Sept 2022
23 Sept 2022
1 Sept 2022
21 Sept 2022
8 Sept 2022
1 Sept 2022 - 7 Sept 2022
Amount
Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land complete all as directed.
Dismantling of cement concrete tiles, glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in any position and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed incl removing the rubbish outside MD land
Demolition of reinforced cement concrete roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab & similar suspended work complete all as specified and directed incl removal all rubbish material outside of MD Land
M&L rendering 15 mm thick in CM 1:4 on brick masonry surfaces on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed..
M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even etc complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 including as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .
M&L rendering 5 mm thick in CM 1:3 n exc 3.00 sqm each patch in ceiling patches in ceilling finished even and smooth without using extra cement complete all as specified and directed
M&L for Roughning of old concrete floor by picking ,sweeping and washing down with water to remove dust etc. and brushing neat cement slurry with 3.00 kg of cement per sqm complete all as directed.
M&L Non- skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with coloured cement to match the shade of tile laid over & incl 15 mm screed thick in CM 1:6 complete all as specified and directed.
M&L for non skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc laid over & including 5-7 mm thick screed bed of chemical adhesssive of approved make, coloured cement to match with coloured tiles complete all as specified and directed.
M&L for non skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in vertical surface etc with coloured cement to match with coloured tiles fixed over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for coloured Glazed ceramic tiles (300x450 x 7mm thick), in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills etc laid over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite.
M&L for 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking plat forms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade
M&L for 25mm marble slab as in vertical partitions , below kitchen cooking plat form and raised platform of kitchen, under kitchen platform.
M & L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors complete all as specified and directed.
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles/kota stone etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick of size 550 x 550 mm in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete
M & L for Machine cut kota stone slab flooring 20-25mm thick in steps in single piece laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete
All as per item No 21 above but as in risers to steps, skirting over & incl rendering 10 mm thick in CM 1:4 complete all as directed
Rounding to edges of stone slab such as in steps (Kota stone) one edge etc complete all as specified and directed.
Rounding to edges of stone slab ( granite) two edges such as in cooking platform etc complete all as specified and directed.
S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent) of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as directed
S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent as approved by GE, one side white laminated and other side un-decorative as in back of kitchen cabinets complete all as specified and directed.
S & F kitchen plain baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen prerforated cutlery baskets of stainless steel size 17" x20" x 4" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen cup & saucer baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen plate baskets of stainless steel size 17" x20" x 6"of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F kitchen grain baskets of stainless steel size 17" x20" x10" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime or equivalent as approved by GE)
S & F stainless steel basket guide channels suitable for running basket as mentioned in item 33-37 above of grade SS-304 complete all as specified & directed. (Make : Hettich or equivalent as approved by GE)
S & F auto close hinges , stainless steel of grade SS-304 , bright finish fixed complete all as specified (Make : Hettich or equivalent as approved by GE)
S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed
S & F kitchen sinks made of stainless steel sheet 18 guageof Grade SS-304 incl plug, washer, brass sink coupling, waste pipe, bowl size 410x330x160mmand overall size 495mmx420mm fixed in kitchen complete all as specified and directed.
Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge
S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
Fixing only after cleaning 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
Fixing only after cleaning 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
S&F in repair bib taps 15mm bore long body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : F330011) Make : Hindware or equivalent as approved by GE
S&F in repair bib taps 15mm bore short body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : F330003) Make : Hindware or equivalent as approved by GE
S&F in repair bib taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete all as specified and directed. (Cat Part No : F330024) Make : Hindware or equivalent as approved by GE
S&F in repair pillar taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : F330034 Make : Hindware or equivalent as approved by GE)
S&F in repair brass CP towel rail 20mm dia, D type 60 cm long complete all as specified and directed. Make : Nebko or equivalent as approved by GE
S&F double Soap dish, CP brass 'R' type fixed to plugs with chromium plated brass screws complete all as specified and directed. Make : Nebko or equivalent as approved by GE
S&F in repair Brass chromium plated shower rose 125mm x 125 mm size with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed. (Model : 'RN' Hindware or equivalent as approved by GE)
S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed. (Cat Part No : F330043, Hindware or equivalent as approved by GE)
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.
S & F wall mixer CP hot & cold, 15mm bore with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed. Cat No : 52 Make : Hindware (contessa plus) or equivalent as approved by GE
S & F 250 mm Corner Glass shelf with brass brackets
S&Fin repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including antisyphonage pipe complete all as specified.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S&F in repairs vitreous china wash hand basin white flat back size 550 x400 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive of fixing of supply and waste pipe
S& F 32 mm bore PVC waste pipe 75 mm long of approved Make : Prayag or equivalent as approved by GE
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed.
M & L brick work using Subclass B bricks in exc. 6 m mean radius on plan built in cement mortar 1:6 complete all as specified and directed.
M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:6 complete all as specified and directed.
M&L for random ruble uncoarsed stone masonary well bonded , bedded and solidly hearted built in CM 1:6
Dismantling of 75mm bore cast iron soil/waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
Dismantling of 75mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
Dismantling of 100mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls
S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal
S&F 110 mm dia PVC (SWR) bends any radius with access door
S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal
S&F 75mm dia PVC (SWR) bends any radius
S&F 75mm dia PVC (SWR) branch piece, double (double y)
S&F 110 mm PVC (SWR) vent cowl
S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement
S& F Salt glazed stoneware gully traps of size 150x150 , square or round mouthed, type‘P’
S&F PVC clamps for rain water , soil, waste pipe incl bolts if required for securing/ holding in position pipes of dia 75 mm.
All as per Item No. 78 above but 110 mm dia.
S & F MS CP Grating doom 100 mm dia with waste hole
S & F MS CP Grating doom 100 mm dia
Dismantling of PVC Water tank up to cap 500 Lts & removal of all retrieved material
S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), two layered, hoisted and fixed in position complete all as specified in SSR Part I .
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and Refixing in same position including Resecuring or easing & adjusting complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. .
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges ,lock strike plate, etc complete all as specified.
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges ,lock strike plate, etc complete all as specified.
S & F for Solid wood grain printed PVC sheet door frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet `C' Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C' Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C' channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing.
S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out of MS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mm wide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed. Note :- (i) Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic or equivalent as approved by GE. (ii) The PVC doors shall be fixed as per manufacturer's instructions and as directed by Engineer-in-charge.
S & F 35mm thick flush shutters solid core construction with block board and plywood face panels, fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instructions
M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters etc complete all as directed.
S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/ wire gauge shall be measured and paid for separately
S&F mortice lock for main door of Godrej locking solution and system ELC-06 -6 Lever door handle with loc set steel. Make- Godrej or Equivalent as approved by GE
S & F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/wire gauge shall be measured and paid for separately
Supply only Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters
S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters
S&F aluminium mesh of wieght exc.0.55 Kg/Sqm as support to SS wire cloth
S &F Framed work such as door frame, grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 (Ladders, door frames and cooler stand etc)
S & F MS butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.
S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate.
S & F SS handles cast moulded type 150mm size fixed with screws.
S & F SS barrel tower bolts not less than 12 mm dia of extruded section, 200mm long as specified.
S & F in repair 75 mm long door stopper of stainless steel body with two number rubber shoes
S & F MS Helical door spring150mm long including roller and roller plate complete fixed to angle iron chowkats. as directed and specified.
S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges godrej patern locking arrangement incl 12 mm dia verticak rod incl spray painting in factory in wood finish pattern or as directed.
S&F in repair 25 mm dia SS drapery rod grade 304 medium weight all as specified and as directed. Make Jindal or equivalent
S&F SS -304 grade brackets/ end brackets for holding drapery rod all as specified and as directed.
S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L preparation old untreated steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement including Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' (Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface and filling lime concrete 1:5:10 type E2, 250 mm thick with brick bats complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately
M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over one coat of 2mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over one coat of 2mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed..
M&Lfor Preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer with hand roller complete all as specified.
M&L for complete removal of exiting surface & thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior emulsion paint using hand roller of over one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified and as directed by Engineer-in-Charge.
M & L for preparation of old plastered surfaces of walls & applying two coats of white wash using brush complete as specified & directed
M & L for preparation of newly plastered surfaces & applying three coats of white wash by using brush on ceilings complete as spd & directed
M & L Complete removal of existing treatment of old plastered surfaces of ceilling and Washing, rubbing down and stopping of painted surfaces & applying two coats of white wash by using brush complete all as spd & directed
M&L Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate,on lintels up to 1.5m clear span, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating, as directed
Taking down existing water proofing roof treatment of all description complete all as specified and directed.
Demolition of PCC in roof covering. Kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing tratment of any type all as directed by Engineer - in charge.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement measured & paid separately.
Supply only liquid water proofing compund
M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair complete all as specified.
The surface shall be painted with one coat of polymeric primer @ 0.40 kg per sqm conforming to IS: 3384 and a coat of bitumen grade 30/40 @ 1.20 kg/ Sqm below the layer of APP based polymeric memberance.( 3 mm thick minimum weight not less 150 gms ) and Side over lap shall be 75 mm and ends shall be 100 mm and all over lap and joints insert upto thr ht 150 cm vertical surface imbeded in wall and finifhing in CM 1:3 , embeding membrane into spout pipe , roof down ward facia and shall sealed by torch application with bitumen 30/40 grade, coved filled in PCC (1:2:4) type B-0 of radious 75 mm at roof junction,parapet wall and other vertical surface complete all as specified Applicatiion of polymeric memberance shall be torch application all as per manufacturer instructions.
M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M & L for PCC (1:3:6) type -1 using 20 mm graded stone aggregate as in kerb stone.
S & F fixed in repair Plate rack of size 750mm x600mm x250mm fabricated out of 6mm th stainless steel sheet fixed complete all as specified and directed.
Dismantling of loose reinforced cement concrete any description by chieseling , wedging etc. cutting the unserviceable reinforcement as in roofs, floors (including ground floors), beams, staircases, landing, chajjas, slab, similar suspended and columns work complete all as specified and directed incl removal all rubbish material where directed.
M&L for fiberous micro concrete and repairing the damaged surface of concrete fix the formwork/ shuttering across the profile of damaged structural element, pour the free flow ready mix micro concrete mix with water as per manufacturing instructions in the formwork. Micro-concrete should be mixed in steel tray homogeneously mix concrete is based on type of structural element and its location. The work should be carried out with all safety measures like helmet, safety belt and under supervision of qualified supervisor etc. complete. Note : 1. Dry wt of micro concrete shall be measured for payment puspose. 2. Necessary form work /shuttering deemed included in quoted rate by bidder.
Taking down & Chipping the RCC surface and cleaning the rusted reinforcement and exposed surface by wire brush, mechanical device or any other established method and applying the rust removing solution of approved make and quality with cotton swab to reinforcement and allowing to dry the same for 24 hrs complete all as directed.
M & L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as directed and specified.
S&F MS TMT bars 6 mm to 8 mm dia cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia.
All as per item No above 140 but 10 mm dia & over
M&L formwork to chullah hoods, chajjas through and similar items including edge finish flat surface complete all as directed.
M&L formwork to sode of pillar post , struts, piers, columns and stanchions etc finish with flat surface complete all as directed.
M&L formwork to soffits of suspended slab such as roof slabs, floor slabs n.exc.200 mm thick.
M&L for RCC M25 (20 mm graded stone aggregate ) as in Chhaja, roof projection etc complete all as directed.
M&L for RCC M25 (20 mm graded stone aggregate ) as in slabs supported on walls beams & coloumns in floors , roofs, balconies etc.
Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering
Dismantling wrought iron or mild steel work of any description nototherwise provided for
M & L Steel work in tabular trusses including special shaped washer, Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete using ERW or induction butt welded tubes conforming to grade Fe 410 -W (Gde- E- 250) quality-A complete all as directed.
S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified.
Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar
M&L precast PCC blocks or slabs 150 mm thick (1:3:6) mix type C-1 using 20 mm graded aggregated with plain ot interlocking joints as directed complete in walls setting in CM (1:6) complete all as directed
M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in base.
M&L Sand cusion under floor ,spreading and levelling in layers 25 mm thick .
M&L 60 mm thick PCC intrelocking tiles rubber moulded precast concrete with grey cement & no pigment conforming to IS 15658-2006 with M-35 Grade any shape and size as directed by Engineer-In-Charge.
M&L 60 mm thick PCC intrelocking tiles precast concrete rubber moulded with colour pigment precast concrete conforming to IS 15658-2006 with M-35 Grade any shape and size as directed by Engineer In-charge
M&L for retrieving small plants from walls roofs, chajja upto double storey height incl taking out deep roots and pouring Hcl acid and making good the disturbed surfaces with CM 1:4 incl all means required at site
S&F factory made UPVC top hung double shutter using standard sections as per manufacturers instructions incl SS wire guage of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and glazed shutter with 5 mm th toughned glasss incl hinges stays & hardware etc complete9.Design of ventilator shall be - bottom half fixed toughened glass 5 mm thick, upper half with two shutters ie gauged and glazed.) (Note: The unit rate quoted by contractor excluded cost of glass and includes all other connected accessories, net opening will be measured for payment purpose, Silicon sealant will be paid separately)
Supply only Silicon sealant tube of 500 ml.
S&f 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane
Taking down carefully copper /aluminum point wiring complete, removing materials from site a making good disturbed surface of walls, floors etc all as directed.
Taking down fuse Unit/DBs 415 Volt/230 Volt
Taking down light fittings of any type complete all as directed .
Taking down old aluminium/copper conductor sub main wiring of any size complete all as directed..
M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC concealed conduit of suitable size but not less than 20mm dia, with all fittings, concealed in wall/roof /floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :- One light/fan/ Exhaust fan point controlled by one switch 6 Amps 1 way.
All as per Item 167 above but One Bell point controlled by one switch 6 Amps 1 way.
All as per Item 167 above but One light point controlled by two switch 6 Amps 2 way.
All as per Item 167 above but One 3 pin 5 Amp socket out let on independent board.
All as per Item 167 above but One 3 pin 5 Amp socket out let on same board.
All as per item No. 167 above but point wiring with 4 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket outlet on independent board.
S & F Modular switch 6 Amp one way 230 V AC 1 module
S & F Modular switch 6 Amp two way 230 V AC 1 module
S & F Modular switch 16 Amp one way 230 V AC 1 module
S & F modular bell push 6 Amp one way 230 V AC 1 module
S & F Socket Socket, 6A - 2/3 pin combined 2 module,multi socket for all pins 230 V AC
S & F Socket 6A/16A - 2/3 pin combined 2 module multi socket for all pins 230 V AC
S & F fan regulator electronic socket step type 120 W complete all as specified.
S&F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.
S & F Ceiling fan 1200mm sweep,5 Star rated with ISI working on single phase, 230volt,50Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq.mm complete as as directed. Make: Havells (Model no. ES-50 Premium 5)/ Bajaj / Almonard/ Keithan/ Crompton or equivalent as approved by GE Note: Removed ceiling fans shall be returned to mes store
S & F Sub main wiring with PVC insulated cable 4 single core 10 sq mm 1100 V grade with stranded copper conductor on and incl rigid PVC conduit concealed in wall / roof/ceiling (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 10 sq mm for earth continuity all as directed.
S & F Sub main wiring with PVC insulated cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor ( for ups )on and incl rigid PVC conduit concealed in wall / roof/ceiling (ISI marked) incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor single core 6.0 sq mm for earth continuity all as directed. Note : Two run single core PVC insulated multistraded copper conductor (FRLS) cable conduit and one length of earth cable shall be measured and paid for one length
S & F sheet steel powder coated Distribution board concealed in wall for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply SPN 8 Way DB IP 43 Double Door complete all as directed Make: Indoasian/ Schnider /L&T cat no. DBSPN008DD or equivalent as approved by GE
Supply and Fixing of Residual Current Circuit Breakers of 40 A currrent rating 300mA sensitivity 2 module / 2 pole complete all as specified and directed. Make: Indoasian/ Schnider/ L&T cat no. BG404030 or equivalent as approved by GE
S& F MCB SP , 6-32 amps, 10 KA , 240 volts , Make: Indoasian/ Schnider/ L&T cat no.BB10060B-BB1032B or equivalent as approved by GE
Supply and fixing of LED Innovative and compact batten luminaire of 20 watt compraising of thermally conductive material, pre wired with high efficiency electronic driver and high translucent frosted diffuser for glare free , anoised aluminium extruded luminare housing complete all as specified and directed, Make:cat No ENDURALINEARNEOBS20WLED865SPCWH of havells or equivlent in Bajaj /Phillips /wipro crompton or equivalent as approved by GE
Supply and fixing of Aesthetically designed LED linear mirror light of 7 watt , comprising of high out put PMMA diffuser for glare free lighting and pre wired driver complete all as specified and direceted. Make: cat No. LCL-07-CDL of crompton or equivalent in Bajaj/ Philips or equivalent as approved by GE
Supply and fixing of Aesthetically designed LED linear mirror light of 14 watt , comprising of high out put PMMA diffuser for glare free lighting and pre wired driver complete all as specified and direceted. Make: cat No. LCL-014-CDL of crompton or equivalent in Bajaj/ Philips or equivalent as approved by GE
Supply and fixing of LED Bldg security light fitting Luminare of 30 Watt comprising of pre wired driver, pressure die cast aluminum housing heat resistant glass , with IP 65 protection complete with 1.5 meter GI tube and fixing clamps and 3 core copper cable complete all as specified and directed. Cat no. LSTS-30-CDL of crompton or equivalent in Philips/bajaj or equivalent as approved by GE
S & F Exhaust fan 300mm sweep 1440 RPM ,Heavy Duty Exhaust Fans metal body type with ISI working on single phase, 230volt,50Hz AC supply complete with Lovers and fixing acessories complete with insulated 3 core copper cable of size 0.75 sq.mm complete as as directed. Note: OLD unserviceable shall be returned to MES Store
S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete. Note: OLD unserviceable shall be returned to MES Store
Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 100 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx 250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :- Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz. Outgoing : (a) MCB DP 10 KA 'C' series 10-32 Amps - 05 Nos
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil complete all as directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.
Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete.
Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete
Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed by Engr-in-Charge.
S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminum conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 4 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed by Engr-in-charge.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
Supply and fix in replacement PVC fresh air fan 200 mm sweep with louvers, fan motor and accessories complete including making connections.
Schedule of Credit
C.P.Computers
NAGHAR ENTERPRISES
M/S JALANDRA CONSTRUCTIONS
Smita Constructions
SAI MAX INFRAPROJECTS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .