R/R Damages on vrious road under Chopal Division

Amount

Providing /Lying bituminous concrete Materials with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, as per MORTH specification clause No. 509 complete in all respectsby mechanical means as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials.The rate includs octroi royality, Malkana ,Tol tax ,sale tax or any other taxes imposed by the Goverment.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.including carriage of all labour material and equipments to various location through all mode of transportation as per HPPWD specification 1990 volume -I ,as per entire satisfication of Engineer incharge .

Supplying and stacking at site crushed/broken stone aggregate of approved stone of 10mm to 12.5mm (ten millimeter to twelve point five millimeter nominal size) free from dirt, dust deleterious and organic matter in proper stacks along road side with in leads and lifts at site including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Supplying and stacking at site crushed sand free from dirt, dust and other organic matter including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing and supplying of highy density Engineering grade prismatic sheeting 50.8 mm (Fifty point eight milIimetre ) in yellow and white colour at site with in all leads and lifts as per the entire satisfaction of Engineer -in Charge , including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I ,as per entire satisfication of Engineer incharge .

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per Technical Specification Clause 405.By Mechanical Means ,as per entire satisfication of Engineer incharge .

Providing and fixing pavement maker (cateye ) made out of ABS 3mm plastic of size 100*90*20 mm (one hundred into ninty into twenty millimetres) without Sank Retro Reflective Strips on two sides . The pavement maker shall be installed with suitable appoxy ABS , including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I as per entire satisfication of Engineer incharge .

Providing and laying of hot applyed thermoplastic compound as per MoRT&H specification 813 & IRC 35,2.5 mm ( two point five millimetre ) thick including refletorising glass beads @ 250gms per sqm ( two point five millimetre ) is exclusive of surface applied glass beads as per IRC : 35 including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I as per entire satisfication of Engineer incharge .

Lok Pal Rathour