Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC C O M KHARKARANG LUMJINGSUK BLOCK A MADANRTING SHILLONG 793021 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793021 | ₹36.3 L Quoted ₹38.0 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹40.2 LRejected-AOC | ₹40.2 L | L2 | Rejected-AOC Being L2 |
| 3 | L3₹41.8 LRejected-AOC | ₹41.8 L | L3 | Rejected-AOC Being L3 |
| 4 | L4₹42.8 LRejected-AOC | ₹42.8 L | L4 | Rejected-AOC Being L4 |
| Sl No | Description | Qty | Unit | Bhuiya Construction L1 | m/s builders and suppliers L3 | Anup Kumar Paul Choudhury L4 | SHRI YOUNUS KHAN L2 |
|---|---|---|---|---|---|---|---|
| 1.00B & R Division Items | |||||||
| 2.00 | Dismantling of old rusted pressed steal tank of capacity of 24KL complete all as specified and directed by Engr-in-Charge | 3 | Each Job | 9,000 ₹27,000 Lowest | 13,000 ₹39,000 | 15,000 ₹45,000 | 14,200 ₹42,600 |
| 3.00 | Supply, hoisting, installing and connecting of pre-fabricated HOT press Moulded sheet, sheet moulding compound (SMC) panel tank in size of 4m X 3m X 2m having capacity 24KL on existing/new structure tank resting on ISMB & ISMC, capacity laid over sintex pre-fabricated HDG grillage (Hot deep galvanized) channels and SMC panel tank consisting with closed topical nipple for inlet, outlet overflow and washout connection confirming it IS-12701-96 including external FRP ladder for clambing for cleaning also fixing PTMT 100mm dia ball including all fittings also RCC plith/beam all civil work including and drainout for overflow and darin out water all work as per OEM specification and directed by Engr-in-Charge.
Make: Sintex, sovisy, HP Engineers (NEERCO)
Note (i) The contractor shall be provide the load bearing report of existing iron frame structure from any recoginized/Govt approved antionalised institue before installation of New tank on it and the cost for the same will be born by the Contractor.
(ii) All Civil work as per drawing providng by OEM including quaoted rate.
(iii) All welding work including this job as per OEM specification as per drawing | 3 | Each Job | 8,55,000 ₹25,65,000 Lowest | 9,12,000 ₹27,36,000 | 9,50,000 ₹28,50,000 | 8,70,000 ₹26,10,000 |
| 4.00 | Material & labour for erection and fabrication of rolled MS Joint Channel, angle or tee section fixed indepenently without connecting plates etc (cut to ordianry length i e within 20mm of length indicated) confirming to FE-410W (gde-E-250 quality-B) complete all as per site requirment specified and directed by Engr-in-Charge. | 4,000 | Kg | 160 ₹6,40,000 Lowest | 200 ₹8,00,000 | 190 ₹7,60,000 | 192 ₹7,68,000 |
| 5.00 | M&L Steel Tubes, 'Medium grade', 80 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed | 180 | RM | 1,300 ₹2,34,000 Lowest | 1,400 ₹2,52,000 | 1,500 ₹2,70,000 | 1,430 ₹2,57,400 |
| 6.00 | M&L Steel Tubes, 'Medium grade', 50 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed | 100 | RM | 900 ₹90,000 | 890 ₹89,000 Lowest | 910 ₹91,000 | 1,000 ₹1,00,000 |
| 7.00 | Supply & fixed of butterfly valve (water Type), PN-1.6 with SS-304 Disc, Body S G. Iron, lever operated. Nitrile/EPDM Rubber lining of size 50 mm suitable for inlet and outlet Gl pipe of filtration plant Including taking out old unserviceable butterfly valves complete all as specified and directed. | 3 | Each | 4,500 ₹13,500 Lowest | 5,200 ₹15,600 | 5,160 ₹15,480 | 4,900 ₹14,700 |
| 8.00 | Supply fixing and testing sluice valve cast iron body, class PN 1.6, ISI marked conforming to IS-14846 complete suitable for 80 bore pipe with flanged ends duly drilled, brass spindle, Cl gate with brass rings and iron wheel head, including taking out and disposing off old unsv sluice valves complete all as specified and as directed. | 9 | Each | 14,000 ₹1,26,000 Lowest | 15,100 ₹1,35,900 | 16,000 ₹1,44,000 | 14,500 ₹1,30,500 |
| 9.00 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, not exc 10 sqm on plan and not exe 1.5 m in depth and getting out soft / loose soil complete all as specified and directed. | 11 | Cum | 400 ₹4,400 | 300 ₹3,300 Lowest | 500 ₹5,500 | 455 ₹5,005 |
| 10.00 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exec 25 cm complete all as specified and directed. | 9.46 | Cum | 200 ₹1,892 | 180 ₹1,702.8 | 220 ₹2,081.2 | 176 ₹1,664.96 Lowest |
Tender Value
₹33.2 L
EMD Value
₹66,400
Closing Date
26 May 2026, 6:00 pmClosed
GE SILCHAR
Office of the GE Silchar Masimpur Cantt
REPAIR / REPLACEMENT OF OVERHEAD WATER STORAGE TANKS AT VAIRENGTE AND BHAGA PUMP HOUSE UNDER VAIRENGTE MIL STN
2026_MES_763352_1
8146A/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Vairengte
Class D Category a ii and other criteria as per NIT and Tender Doc
8 documents required · 8 mandatory
₹500
GE Silchar
₹66,400
Yes
9 Jul 2026
4 May 2026
29 May 2026
4 May 2026
26 May 2026
19 May 2026
4 May 2026 - 15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | B & R Division Items | - | - | - | - |
| 2 | Dismantling of old rusted pressed steal tank of capacity of 24KL complete all as specified and directed by Engr-in-Charge | 3 | Each Job | - | - |
| 3 | Supply, hoisting, installing and connecting of pre-fabricated HOT press Moulded sheet, sheet moulding compound (SMC) panel tank in size of 4m X 3m X 2m having capacity 24KL on existing/new structure tank resting on ISMB & ISMC, capacity laid over sintex pre-fabricated HDG grillage (Hot deep galvanized) channels and SMC panel tank consisting with closed topical nipple for inlet, outlet overflow and washout connection confirming it IS-12701-96 including external FRP ladder for clambing for cleaning also fixing PTMT 100mm dia ball including all fittings also RCC plith/beam all civil work including and drainout for overflow and darin out water all work as per OEM specification and directed by Engr-in-Charge.
Make: Sintex, sovisy, HP Engineers (NEERCO)
Note (i) The contractor shall be provide the load bearing report of existing iron frame structure from any recoginized/Govt approved antionalised institue before installation of New tank on it and the cost for the same will be born by the Contractor.
(ii) All Civil work as per drawing providng by OEM including quaoted rate.
(iii) All welding work including this job as per OEM specification as per drawing | 3 | Each Job | - | - |
| 4 | Material & labour for erection and fabrication of rolled MS Joint Channel, angle or tee section fixed indepenently without connecting plates etc (cut to ordianry length i e within 20mm of length indicated) confirming to FE-410W (gde-E-250 quality-B) complete all as per site requirment specified and directed by Engr-in-Charge. | 4,000 | Kg | - | - |
| 5 | M&L Steel Tubes, 'Medium grade', 80 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed | 180 | RM | - | - |
| 6 | M&L Steel Tubes, 'Medium grade', 50 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed | 100 | RM | - | - |
| 7 | Supply & fixed of butterfly valve (water Type), PN-1.6 with SS-304 Disc, Body S G. Iron, lever operated. Nitrile/EPDM Rubber lining of size 50 mm suitable for inlet and outlet Gl pipe of filtration plant Including taking out old unserviceable butterfly valves complete all as specified and directed. | 3 | Each | - | - |
| 8 | Supply fixing and testing sluice valve cast iron body, class PN 1.6, ISI marked conforming to IS-14846 complete suitable for 80 bore pipe with flanged ends duly drilled, brass spindle, Cl gate with brass rings and iron wheel head, including taking out and disposing off old unsv sluice valves complete all as specified and as directed. | 9 | Each | - | - |
| 9 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, not exc 10 sqm on plan and not exe 1.5 m in depth and getting out soft / loose soil complete all as specified and directed. | 11 | Cum | - | - |
| 10 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exec 25 cm complete all as specified and directed. | 9.46 | Cum | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
8146A-SchOfCreditformat.pdf
Additional Documents • 0.03 MB
8146A-TP.pdf
Tender Documents • 0.50 MB
BOQ_855055.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].