ADDN/ ALTN TO JCOs/OR MD ACCN AT QSP ENCLAVE AND PROVN OF HARD STANDING WITH OVERHEAD SHED IN FRONT OF SAND MODEL UNDER AGE B/R-I OF GE (N) MAMUN

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 95 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.Make : Ploycon, Echon Industries, Rajshree plastiwood, H R Enterprises

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS-1003 (Part-I)(Larger size to be provided) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per section 8 clause 8.20 (a) of SSR Part-I (larger size to be provided) complete all as specified and directed

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F in repair for 24 mm thick one side prelaminated PVC solid board of approved make with acrylic lamination not less 0.50 mm thick one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm and average density ranging from 500-700 Kg/ Cum fixed as in kitchen kitchen cabinet, cupboard and pelmet box etc fixed with screws to steel/timber/PVC frame work etc complete all as specified and directed.

S&F Factory Made Solid PVC Moulded door Shutter With wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded woodgrain collured prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.Make : Ploycon, Echon Industries, Rajshree plastiwood, H R Enterprises

S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces complete all as specified and as directed.

S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S&F 100 mm size butt hinges (as per sample) medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

S&F in repair 25mm bore mild steel powder coated, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed.

Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Brick work with old servicable bricks retrieved from dismantling straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed.

M&L Brick work with old servicable bricks retrieved from dismantling straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick cement plaster on fair faces of brick work, concrete sruface in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick cemet plaster on fair faces of brick work or concrte surfaces in CM 1:4 in two layers (5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC over finishing layer complete all as specified and directed. Note: WPC shall be measured and paid seperately)

M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections, drainge etc and making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of exterior emulsion (weather coat) paint complete all as specified & directed.

M&L for preparation of new/ Old wall surface including making surface clean, dry and free form any loose paint film, dirt, chalk, grease, fungus and algae and over primed surface applying two coats of acrylic, antifungal emulsion exterior weather proof paint on external surfacecomplete all as specified & directed.

M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed.

M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed.

M&L for preparation of old surface of wall complete removal of existing treatment and applying 2mm thick wall care putty over one coat of primer and making surface even and smooth and applying two coats of oil emulshion distemper complete all as specified & directed.

M&L two caot of white wash on surface of wall including preparation of old plastered surface after complete removal of existing treatment complete all as specified & directed

M&L two caot of white wash on surface of ceiling including preparation of old plastered surface complete all as specified & directed

M&L for preparation of old surface after complete removal of existing treatment making surface smooth using with alkali resistance primer paint for external surface, applying two coats of cement base paint complete all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for 25mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in, sub floors for laying floor finish complete all as specified and directed.

Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floors complete all as specified and directed.

M&L for 12 mm thick heavy duty Industrial tiles (sqaure/ rectangular), area of each tile exc 0.08 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer mortar in CM 1:4 complete all as specified and as directed.

80mm thick factory made machine pressed precast concrete, coloured interlocking paver block with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and non-fadable epoxy coated colour pigment), any shape, size and design as approved by Engr-in charge confirming to IS 15658-2006, M-40 grade, complete all as specified and directed.

M&L for Sand filling under floors or in foundation in layers n exc 25mm thick including watering and consolidation complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor, skirting/dado or verticle surface etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

M&L for green/black marble work 12-15 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra complete all as specified and directed.

M&L for Round chamfering to the edges of marble slabs not exc 15 mm wide complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore dia all as specified and directed.

All as per item No 51 here above but 15 mm bore

S&F 15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed.

S&F in repair 15mm bore dia Bib taps, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.

S&F Vitreous china wash hand basin, white flat back, size 550 x 400 mm (as per sample), including brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.

S&F in repair 15mm bore pillar tap capstan head cast copper alloy, chromium plated, screwed down high pressure with or without letters HOT or COLD with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.

S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed.

S & F in repair brass CP Shower rose with or without swivel joints, (any size) including fixing to steel pipe or union complete all as specified & directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed.

PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately.

S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipe fixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw complete all as specified and directed.

S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed

S&F in repair 100 mm bore Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs 100mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F in repair cast iron 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed.

S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed

S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed

S&F in repair Cast iron soil, waste and vent pipes, sand cast, 50mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed

S&F in repair 75 mm bore Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs 75mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F in repair cast iron 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors complete all as specified and directed.

S&F in repair Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.

S&F in repair Cast iron cowl of 50mm bore complete all as specified and directed.

S&F in repair Cast iron swan necks (or offsets) upto 152mm projection for 100mm to 50mm pipe complete all as specified and directed.

Excavating in post holes (or similar holes) in any type of soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick watering and well ramming and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

Cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

Removing excavated material to a distance exc 250m but n exc 1500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

Rolled mild steel in roof trusses (framed),trussed ,purlins,crane girders,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde-E-250) quality-A including one shop coat of zinc chromate primer before fixing in position complete all as specified & directed.

M&L 20 mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth mixed with liquid water proofing compound as per manufacturer instruction including racking out joints, hacking for jey, scrubing down with water etc complete all as specified and directed.

M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 350% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.45 ltr/ Sqm . Apply third and final coat undiluted @ 0.45 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement moratr and finishers to match existing surface complete all as specified and directed.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and connected to common earth dolly with 1.6mm thick cadmium plated CI/GI pressed steel sunken boxes of adequate size, 3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible.

All as per Ser item No 108 but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 108 but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 108 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/15 Amp flush type, 240 volts complete all as specified and as directed.

S&F switch piano flush, flush type with shutter single pole one way 15 Amp 240 volts complete all as specified and as directed.

S&F in replacement switch flush button ,single pole two way 5 Amp complete all as specified and as directed.

S&F in replacement bell push switch, 5 Amp, AC 230 Volt complete all as specified and directed.

S&F in replacement Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed.

S&F in replacement ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals.

S&F in replacement stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed.

S&F in replacement Lamp holder jumbo modular type, PVC/Polycarbonate type with back plate suitable for batten fitting including 15 W LED Lamp complete all as specified.

S & F in replacement for sub Main Wiring with two run single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.2m thick with all accessories incl cutting chases on wall and making good to the disturbed surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA of rating 5 to 32 Amp, 'C' series complete all as specified and directed.

All as per Ser item No 124 but for size 32 Amps MCB SPN.

S&F in replacement LED mirror light 1x10 Watt 2' feet prewired with all accessories including lamp complete with all accessories internely pre wired and including connection up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repalcement surface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with three core twisted flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in repalcement of intenso LXS LED Batten 20 watt of size not less than 3'7", 6500 K, 230 volts, PF-0.95, CRI-80, life 25000 burning hours, wall mounted complete with all accessories internely pre wired and including connecting up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for repair to existing switch board by taking out the old existing ser/unsv switches, sockets, regulators any type and refixing the servicable switch/sockets after replacement of old unsv/broken Hylum sheet of thickness not less than 3mm of size upt0 5"x5" complete all as specified and directed.

All as per srl item No 129 abvoe but size 8"x5".

All as per srl item No 129 abvoe but size 9"x11".

S&F in replacement concelaed GI/CI sheet metal box (16 Guage) including flush mounting in wall and taking out old rusted sunken box of size upto 7"x4" and making good the disturbed surface of wall/floor with cement mortar and finish to macth existing surface.

All as per srl item No 132 abvoe but size 8"x10".

AV ENTERPRISES (BID ID -3511989)

M/S HIMANSHU BUILDERS (BID ID -3505606)

M/S CANTILEVER ENGINEERS (BID ID -3506065)

yash paul gupta (BID ID -3506106)

M/S DUGGAL CONSTRUCTION CO (BID ID -3505873)