Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹31.1 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹33.3 L+₹2.2 L (7.10%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹33.5 L+₹2.4 L (7.76%)Admitted-Finance | L3 | Admitted-Finance | ||
| 4 | L4₹34.2 L+₹3.1 L (9.95%)Admitted-Finance | L4 | Admitted-Finance |
Tender Value
₹36.8 L
EMD Value
₹73,660
Closing Date
25 May 2026, 4:00 pmClosed
Er Pawan Tickoo
Executive Engineer PWD RandB Electric Div Jammu
please refer BOQ
2026_PWDJK_310225_1
Fresh e-NIT No.EDJ/ 16 of 2026-2027 Dated 18-05-2026
Open Tender
Electrical Works
Percentage
60 days
Billawar
please refer to NIT
2 documents required · 2 mandatory
₹600
Executive Engineer PWD RandB Electric Div Jammu
₹73,660
3 Jun 2026
18 May 2026
26 May 2026
18 May 2026
25 May 2026
18 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, intastallation, testing & commissioning of 250 KVA Capacity radiator cooled DG Set with suitable capacity engine directly coupled with alternator for 415 volt, 3 phase, 50 Hz, 4 wire, generation system complete with accessories, fuel oil tank & control panel etc as required and sound proof acquastic enclosure for the DG SET, including supply, fixing of antivibration pads suitable for 250 KVA DG Set as per standards of Engine manufacture, provision of conrol cable from engine to control panel to engine. Provision of pipe fuel pipe line of suitable size fron fuel tank to engine and over flow pipe engine to fuel tank complete gate valve and fitting leader maker etc. Supply , Intallation of starting batteries of suitable AH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials sylencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by engineer incharge. DIESEL ENGINE (CPCB-4 NORMS COMPLANT) 4 Stroke, Radiaotr Coolled, Diesel Engine Model Having Following Arrangement :- Flywheel with Starter Ring for Generating Set Air Filter , Lube Oil Cooler Assembly with accessories. Exhaust air manifold Exhaust Bellow Fuel Fiter Lube Oil Filter | |||||
| 1.01 | Exhaust Gas Turbocharger with after Coller
Day tank for fuel with markings
ECP Panel mounted on a separate frame.
Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump
24V Electrical Starting System with Starter Motor and Battery Charging Alternator
Engine Mounting Supports
Make Engine:- Cummins, Kirloskar & Volvo
ALTERNATOR Rated at 250 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 as per following Specification
Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation.
Voltage Regulation: Provided with fast response thyristor type electronic automatic voltage regulator, which holds output voltage within desired limits . (+/- 1%).
Excitation: Self excited-self regulated.
Alternator Loading: Suitable for taking rated load immediately after machine reaches rated voltage and speed.
Vibration: Suitable for direct coupling with Engine and mounted on common M.S. Channel base frame. | - | - | - | - |
| 1.02 | Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection.
Cooling: Air Cooled type with radial fan mounted on Rotor.
Winding and Insulation: Insulation class H as defined in IS – 4722.
Make Alternator:- Kriloskar, Marshall, & Leroy Somer.
ACCESSORIES :-
MS Base Frame Suitable for Mounting of the Offered Engine and Alternator.
Day Fuel Tank of Standard Capacity Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc
2 Nos 12 Volts DC Battery of SUITABLE Capacity with Leads
1 Set of AVM Pads Fitted in Base Frame.
AMF Panel with standard acessoriesetc as required at site | 1 | Nos. | 31,00,000 | ₹31,00,000 |
| 2 | Construction of PCC Platform for laying of DG set (Complete Job.) | 1 | Set. | 30,000 | ₹30,000 |
| 3 | SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point
(a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure
(b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear
c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125).
(d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge. | 20 | CFT | 2,200 | ₹44,000 |
| 4Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type) | |||||
| 4.01 | 320 Amp, 36 KA, FP MCCB ICU = 100% ICS | 1 | No. | 23,000 | ₹23,000 |
| 4.02 | ON Load Change Over Switch FP 250 amp. (Front operated) | 1 | No. | 18,500 | ₹18,500 |
| 4.03 | Aluminium Bus Bar 800 Amp set of 4 strips 18" | 1 | Set. | 2,250 | ₹2,250 |
| 4.04 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. | 2 | Set | 5,000 | ₹10,000 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.25 MB
BOQ_1003796.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .