Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹51.5 L+₹1.6 L (3.25%)Rejected-AOC | L2 | Rejected-AOC Not being lowest bidder | |
| 3 | L3₹53.9 L+₹4.0 L (8.00%)Rejected-AOC | L3 | Rejected-AOC Not being lowest bidder | |
| 4 | Rejected-Technical | - | Rejected-Technical Not enlisted in appropriate category |
Tender Value
₹43 L
EMD Value
₹65,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R nd D West Bengaluru
GARRISON ENGINEER I R nd D WEST BANGALORE DRDO COMPLEX CV RAMAN NAGAR BANGALORE
MAINTENANCE AND REPAIR / REPLACEMENT OF PUMPING / DISTRIBUTION WATER LINES AND CONNECTED WORKS AT DCA COMPLEX, ALISDA, CEPTAM AND CAIR UNDER GE (I) RndD WEST BANGALORE
2022_MES_530468_1
GE(I)/R ND D/BAN/TOKEN/25 OF 2022-2023 8979/E8
Open Tender
Civil Works
Item Rate
300 days
Bengaluru
Class and Category as per NIT
8 documents required · 8 mandatory
₹500
GE I R nd D West Bengaluru
₹65,000
Yes
20 Aug 2022
14 Jun 2022
1 Aug 2022
15 Jun 2022
26 Jul 2022
8 Jul 2022
15 Jun 2022 - 29 Jun 2022
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of pipe lines etc and getting out in hard/dense soil complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soils complete all as specified and as directed.
Removing excavated soils to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.
Taking out existing unserviceable corroded galvanized iron tubing from trenches / walls / roof, providing material and labour for, Galvanized Iron tubing, medium grade, 100 mm dia with all fittings complete including all as specified and as directed.
All as per serial Item No 04 here-in-above, but for 80 mm dia pipes.
All as per serial Item No 04 here-in-above, but for 50 mm dia pipes.
All as per serial Item No 04 here-in-above, but for 25 mm dia pipes.
All as per serial Item No 04 here-in-above, but for 20 mm dia pipes.
Supply and lay, centrifugally cast, ductile iron pipes 100 mm dia, (ISI marked), K7 grade, with spigot and socket ends, laid in trenches complete all as specified and as directed.
Supply and lay, centrifugally cast, ductile iron pipes 250 mm dia, (ISI marked), K7 grade, with spigot and socket ends, laid in trenches complete all as specified and as directed.
Material and labour for, CI / DI specials suitable for spigot and socket end pipes such as bends, pieces, collar, sockets caps and plugs etc., suitable for 80 to 300 mm bore CI / DI pipes complete all as specified and as directed. NOTE:-Push on type joints will be measured and paid separately under respective items of Schedule.
Material and labour for, Galvanized Iron tubing, heavy grade, 100 mm dia laid in trenches, floor /wall / roof with all fittings complete including taking out the existing un serviceable corroded galvanized iron tubing all as specified and as directed. Notes for Sl Item Nos 04 to 12 :- i) Necessary excavation, earthwork will be measured and paid under respective items. Ii) Cost of Mild steel clamps, nuts, bolts, washers, etc., required for fixing pipes on walls, making holes in roof / walls and finishing the the disturbed surfaces matching with adjacent surfaces, shall deemed to be included in these items only.
Material and labour for, CPVC pipe of pressure rating SDR 11, 20 mm dia laid in trenches, floor /wall / roof with all fittings complete including taking out the existing un serviceable pipes all as specified and as directed. NOTE:- Cost of CPVC specials like brass elbow, brass tee, male / female threaded brass adopter, unions, flange etc shall deemed to included in this item only.
Supply and Install Liquid chlorine/chemical dosing system comprising of cheminject RM series 30 litre per hour at 10 kg back pressure pump dozer system reciprocating mechanically actuated diaphragm type including all accessories and CDS series (CDS-150), FRP solution preperation cum setting tank of capacity 150 litres, electric motor of 0.50 HP 230 volt, 50 Hz operated agitator assembly with lid, part hole, inlet/outlet/drain connection, level guage etc and fitted with speed reducing motor as per SS-316 agitator, Model CDS-150 of RMCO or techno-commercially equivalent make MILTON ROY / DECLIBAC/SATHYA SAI AQUA PURA SERVICES.
Supply and fix in repairs Ball valves suitable for 16 mm dia CPVC pipe (minimum weight 210 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.
Taking out unserviceable/corroded GI union sockets, supply and fix new GI socket for 80 mm dia pipe including leak testing etc. all as specified and as directed.
All as per Item Sl No 16 here in before but for 50 mm dia pipes.
Cutting in existing GI raising main 50 mm dia and inserting GI Tee 50 mm x 50 mm size, including necessary short pieces, unions, socket, threading, jointing including leak testing etc complete all as specified and as directed.
Cutting in existing GI raising main 50 mm dia and inserting GI Tee 50 mm x 20 mm size, including necessary short pieces, unions, socket, threading, jointing including leak testing etc complete all as specified and as directed.
Taking out unserviceable / corroded, Galvanized Iron nipple 50 mm dia and inserting new 50 mm dia GI nipple, including leak testing complete all as specified and as directed.
All as per Sl Item No. 20 here-in-before but for 20 mm dia pipe.
Taking down unserviceable Gun metal globe or gate valve, ISI marked with iron wheel head, 50 mm dia, screwed both ends for iron pipes, complete all as specified and as directed.
All as per Sl Item No. 22 here-in-before but for 25 mm dia pipe.
All as per Sl Item No. 22 here-in-before but for 20 mm dia pipe.
Disconnecting and taking out unserviceable sluice valve, supply and laying new Sluice valve (cast iron body) with both ends flanged and iron wheel handle for clockwise operation, brass spindle heavy duty PN-1.6 class (IS-14846/2000), ISI marked, including 3 mm thick rubber gasket joint, nut, bolts & washers all as requirement of site for 100 mm dia pipe, complete all as specified and as directed.
All as per Sl Item No 25 here-in-above, but of 150 mm dia.
All as per Sl Item No 25 here-in-above, but of 80 mm dia.
Supply and fix in repairs bib taps standard of PTMT high pressure screwed for iron pipe 20 mm dia ((Minimum weight 15mm-90gms/20mm-125gms) and fixed complete all as specified and as directed.
Burning out run lead joints and providing new run lead joints with spun yarn of required quantity suitable for 100 mm dia bore CI pipe joints complete all as specified and as directed. NOTE :- Excavation and earth work will be measured and paid separately under relevant items of this Schedule.
Burning out run lead joints and providing new run lead joints with spun yarn of required quantity suitable for 80 mm dia bore CI pipe joints complete all as specified and as directed. NOTE :- Excavation and earth work will be measured and paid separately under relevant items of this Schedule.
Dismantling the broken/damaged existing valve chambers and Construction of valve chamber of internal size 1.00 M x 1.0 M x 1.0 M in depth with PCC (1:4:8), type D2 (using 40mm graded stone aggregate), 100mm thick for foundation with 100 mm offset for all the sides from outer face of walls, walling with brick masonry in CM (1:6), 10mm thick plastering to the internal surfaces in 10 mm thick CM (1:4), 50 mm thick coping in PCC (1:2:4), type B-1 (using 20 mm graded stone aggregate), mild steel cover made out of angle iron of size 40 x 40 x 6mm as in sides of frame and 3mm thick MS sheet, fixed with split type hold fast- 4 Nos made out of flat iron of size 40 x 6mm, 250 mm long duly embedded in coping and fitted to angle iron frame with 03 Nos of suitable hinges provided with necessary locking arrangements including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface and one coat of coal tar painting on steel surface embedded inside the concrete and two coats of white wash to plastered/concrete surfaces including disposal of rubbish out of premises, complete all as specified and as directed.
All as per Sl Item No.31 here in before but valve chamber of inner size 1.50 M x 1.50 M x 1.0 M.
Cleaning of UG Sump of 1.5 Lakhs Liters capacity by draining out water, removing the silt / mud from inside, cleaning the internal surfaces of wall / ceiling / floors by using wire brushes, removing silt / sludge completely, drying the floor area, cleaning with anti bacterial agent (solution to be prepared in water @ 0.20 Kg of bleaching powder per sqm of internal area) using wire brushes, for making bacterial free, applying two coats of white wash on whole internal surfaces including making necessary writing of details such as date of cleaning of UG sump and next date of cleaning with synthetic enamel white paint over one coat of black painted surface all as specified and as directed by Engineer-in-charge.
All as per Sl Item No. 33 here in before but for UG Sump of 0.80 to 1.20 Lakh Liters capacity all as specified and as directed.
All as per Sl Item No. 33 here in before but for UG Sump of 0.25 Lakh Liters capacity all as specified and as directed.
Taking down unserviceable, supply and fix cast iron Non-return valve ISI marked with iron wheel head, screwed both ends for iron pipes, suitable for 50 mm dia pipe complete all as specified and as directed.
Taking out unserviceable gun metal foot valve, supply and fix Gun metal foot valve 50 mm dia in pipe line complete all as specified and as directed.
Taking out unserviceable Cast Iron foot valve, supply and fix 100 mm dia Cast Iron foot valve, connecting up in CI pipe line complete all as specified and as directed.
Cleaning valve chamber of any size from inside and outside using wire brush, removing the foreign materials / mud accumulated in the valve chamber, cleaning the surface of sluice valve / non-return valve / air valve, applying two coats of white wash for inside and outside of cement plaster surfaces, painting with one coat of synthetic enamel paint of existing colour for valves and MS cover plate complete all as directed.
Material and labour for, Rolled Mild Steel as in joists, channel, angle or tee sections in main and cross beams of Fe 410-W grade steel for ladders of under ground sumps and over head tanks including cutting, welding, grinding sharp corners etc., complete including taking down unserviceable ladder all as specified and as directed. NOTE :- The quoted rates are inclusive of unloading, fabrication work at site, reducing to required shape & size, hoisting, fixing etc and painting with two coats of black paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.all as required at site.
Material and labour for, painting of CI/GI pipe line of any size, exceeding 10 cm in width or girth, preparation of surfaces by brushing with wire brushes for removing old paint and finally forming the cleaned surface with gunny bags to remove all loose dirt etc and painting of two coat of black bituminous paint all as specified and directed.
Taking down unserviceable water meter, supply and fix, CI heavy duty, flanged water meter suitable for 250 mm dia pipes, IS marked and conforming to IS 4064, with leak proof and minimum head loss, complete all as specified and as directed.
Supply and fix in repairs, stainless steel body, female coupler 63 mm dia suitable for fire hydrant loading valves (ISI marked) with lock complete all as specified and as directed.
Supply and fix in repairs, gun metal fire brigade inlet connection for connecting to external fire hydrant ring main consisting of two Nos 63 mm dia instantaneous type coupling complete with all accessories complete all as specified and as directed.
Supply and fix in repairs, fire hydrant landing valve single head outlet of 63 mm dia conforming to IS 5290, complete all as specified and as directed.
Supply and fix in repairs, fire hydrant stand post, 80 mm dia GI, both ends flanged type, 1.5 m height with provision of single outlet connection, complete all as specified and as directed.
Supply and fix in repairs, internal mild steel sheet of size 800 mm x 600 mm x 250 mm with double door, front with 4 mm thick glass, hose box for keeping 2 Nos of hose pipe of length 15 m, each, branch pipe, nozzle, coupling etc, made out of 2 mm thick mild steel including gaskets, and painting with two coats of synthetic enamel paint of fire red colour over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Supply and fix in repairs, external mild steel hose box of size 800 mm x 600 mm x 250 mm for keeping fire brigade outlets, coupling etc, made out of 2 mm thick mid steel sheet with double door, front side with 4 mm thick glass including gaskets, fixing box properly on mild steel stand made of 40 mm x 40 mm x 5 mm angle iron frame embedded in floor with PCC foundations in (1:3:6) type C2, and painting steel surfaces with two coats of synthetic enamel paint of fire red colour over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Supply and fix in repair, Gun metal branch pipes of 63 mm dia, with 12.5 mm nozzle, conforming to IS 903, ISI mark embossed on it complete all as specified and as directed.
Supply and fix in repairs hose reel drum, swing type with hose reel of 20 mm dia, 30 m length conforming ot IS 5132 and fixed to wall properly with nuts, bolts, clamps, etc., complete all as specified and as directed.
Supply and fix in repairs, Rubber reinforced line (RRL) hose of 15 metres long, 63 mm dia conforming to IS-636 with one set of gun metal female and male instantaneous coupling conforming to IS 903, complete all as specified and as directed.
Supply and fix in repairs, 100 mm dia, with mild steel cage Pressure Gauge upto 14 kg/ Sq cm complete all as specified and as directed.
Supply and fix repairs, cast iron non-return valve, flange type of heavy duty wafer type, 100 mm dia complete all as specified and directed.
Supply only high strength calcium based granular disinfectant (with 60 to 70 % Chlorine) for chlorination of water. Make : Any make approved by E-in-C's Branch, AHQ New Delhi. Note: (i) Supplier shall provide a "certificate of compliance"/Test certificate in original indicating Batch No., date of manufacturing, and quantity supplied. (ii) Supply of materials shall be regulated as per work orders issued time to time as per the requirement. (iii) Only fresh lot (not more then two months at the time of received material) shall be supplied by the contractor. Batch no and date should be marked on every container.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .