Special repairs to Bldg No. P-37 1 to 8 ORs Md Accn at New Mil Stn Kapurthala under GE Kapurthala.

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-charge.

M/L for glazed ceramic coloured tiles in vertical surface 300 x200 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour, over and including 10 mm thick cement screed bed (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) 300x300mm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbishing and polishing over and including 20mm thick screed bed in CM 1:6 complete all as specified.

M&L for PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40mm thick as for receiving top finishing layer of ceramic tiles for sunken portion finished even and smooth etc complete all as specified and directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed by Engineer-in-charge.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engineer-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.

Use and waste of formwork to chajjas and similar items including edges rough finished surface complete all as specified and directed by Engineer-in-charge.

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified and directed by Engineer-in-charge.

M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for 15mm thick rendering in CM 1:4 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed by Engineer-in-charge.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement on ceiling etc complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surfaces of walls and applying one coat of primer to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge

M & L for applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and directed by Engineer-in-charge.

M & L for applying two coats of cement base paint on old plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded aggregate as in sub base complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed by Engineer-in-charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engineer-in-charge.

S &F factory made solid panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and directed by Engineer-in-charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm complete all as specified and directed by Engineer-in-charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C2 as in filling back of chowkhats complete all as specified and directed by Engineer-in-charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge

S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes the door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed by Engineer-in-charge.

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and directed by Engineer-in-charge.

S &F factory made 2nd class hard wood plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Engineer-in-charge.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt is 200mm complete all as specified and directed by Engineer-in-charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Engineer-in-charge.

S&F 300mm long mild steel sliding door bolt plate type stove enamelled black and bright bolt not less than 12mm dia including a minimum of 6 nos of nuts and bolts all as specified.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, grills & painting shall be measured & paid for separately.

All as per srl item No. 41 here in before but of gauged shutter. Note for item No. 41 & 42 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

S&F 4.00mm thick plain glass in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engineer-in-charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed by Engineer-in-charge.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work conforming to Fe-290, Gde E-165 all as specified and directed.

S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified

Taking up or down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia stop valve/angle cock, CP cast copper alloy with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed by Engineer-in-charge.

Supply and fix in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with and including P or S trap, PVC flushing cistern low level of 10 ltrs capacity brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engineer-in-charge.

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engineer-in-charge.

S&F in repairs CI Nahani trap with grating and diameter of outlet 100mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed by Engineer-in-charge.

Supply and fix vitreous chinaware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engineer-in-charge.

S&F in repairs shower rose of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm), size 100mm with 300 mm long CP arm complete all as specified and directed by Engineer-in-charge.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge.

S&F soap dish, chromium plated heavy weight complete all as specified and directed by Engineer-in-charge.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats(min. weight 300gm) complete all as specified and directed by Engineer-in-charge.

S&F in repair anodised aluminium alloy curtain rail chromium plated with fixing brackets, stops, roller etc as specified and directed complete all as specified and directed by Engineer-in-charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/sqm including cleaning surfaces complete all as speciified and as directed by Engineer-in-Charge.

M&L for PCC (1:5:10) type E2 using 40mm graded aggregate as in sub base complete all as specified and directed by Engineer-in-charge.

Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Taking down eaves, gutters and rainwater pipes including all fittings complete all as specified and directed by Engineer-in-charge.

S&F 110 mm PVC (SWR) pipes class 'A' in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge.

S&F PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.

Dismantiling water tank PVC 500 Ltrs and removing from site complete all as specified and directed by Engineer-in-charge.

M & L for rotational moulded polyethylene water storage tanks of capacity 500 Ltrs (cylindrical vertical with closed top, ISI marked ) double layer white or black colour of ISI marked, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed by Engineer-in-charge.

S& F in repairs ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed by Engineer-in-charge.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engineer-in-charge.

Demolition of mud in roof any thickness including plastering & leeping removed complete all as specified and directed by Engineer-in-charge.

M&L for rendering 10mm thick cement mortar 1:4 on concrete surface even and smooth with waterproofing compound complete all as specified and directed by Engineer-in-charge. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surface making surface completely dry including applying a coat of bitumen primer confirming to IS :3384-1965 @ 0.30kg/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers laid with torching application to the surface over and including a coat of hot blown bitumen 85/25 @1.20 Kg/Sqm complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed by Engineer-in-charge.

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:6 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed by Engineer-in-charge.

All as per item no 82 above but except brick tiles complete all as specified and directed by Engineer-in-charge.

Demolition and breaking up 200mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in CM complete all as specified and directed by Engineer-in-charge.

M&L for 200mm bore dia RCC pipe class NP2 laid and jointed in cement mortar 1:1 with collars and tested complete all as specified and directed by Engineer-in-charge.

Excavation in trenches n. exc 1.5 m wide & n.exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engineer-in-charge.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed as in soft/loose soil out side the MOD land complete all as specified.

Dimantling cast iron soil waste or vent pipe any dia , any length with or without ears with fittings, fixed to walls or taking out of trenches complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of cast iron soil, waste and vent pipe 100mm bore, in any length with or without ears, with cement joints, laid in trenches or to walls complete all as specified and directed by Engineer-in-charge.

Suplly and fixed 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed in repairs complete all as specified and directed by Engineer-in-charge.

Supply and fixing stack clamps suitable for 100mm bore CI pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed by Engineer-in-charge.

S&F 100 mm cast iron bend complete all as directed by Engineer-in-Charge.

Extra only on item No. 91 & 93 if fitted with oval access door complete all as specified and directed.

Supply and fixing of cast iron soil, waste and vent pipe 75mm bore, in any length with or without ears, with cement joints, laid in trenches or to walls complete all as specified and directed by Engineer-in-charge.

Supply and fixing 75mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed in repairs complete all as specified and directed by Engineer-in-charge.

S&F 75 mm Cast Iron bend complete all as directed by Engineer-in-Charge.

Extra only on item No. 96 & 97 if fitted with oval access door complete all as specified and directed.

S&F 100mm cast Iron cowls complete all as specified and directed by Engineer-in-charge.

Supply and fix steel ventilators, fixed type with glazing bars complete all as specified and directed.

Material & labour for 40mm thick PCC padding (1:2:4) type B-1 (using 20mm graded stone aggregate) surface finished even and smooth complete all as specified and directed.

Material & labour for SGSW 150mm dia drain pipe laid in trenches and complete all as specified and directed by engr-in-Charge.

Material & labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed 150mm bore pipes including packing under and haunching against the pipes after they are laid and tested complete all as specified and directed.

S&F 100 mm dia CI cowl fixed to pipe complete all as directed by Engineer-in-Charge.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 106 here-in-before but 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed

All as per srl item No 106 here-in-before but for 3 pin socket outlet, 5 Amps on same board with other switches complete all as specified and as directed

All as per srl item No. 106 above but one light point controlled by two 2-way switches complete all as specified.

All as per description of srl item No 106 here in before but using 2.5 sqmm (nominal area) PVC unsheathed cable independent including PVC cable copper conductor with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor and connecting for earth dolly for 5 pin socket out let 15 Amps on independent board. complete all as specified and directed

S&F switch piano flush type 5 amp single pole one way complete all as specified and directed.

S&F switch piano flush type 15 amp single pole one way complete all as specified and directed.

S&F bell push flush type single pole one way complete all as specified and directed.

Supply and fix socket out let multi purpose 2 in one, 5 pin, 5 amps flush type complete all as specified.

Supply and fix socket out let multi purpose 2 in one, 5 pin, 15 amps flush type complete all as specified.

S&F switch piano flush type 5 amp single pole two way complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

S&F call bell multi music type single pole, AC 240 volt complete all as specified and directed

Supply, installation, testing and commissioning of 20 watt 4 ft long LED batten housing made of extruded aluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. complete all as specified and directed. Make:Polycab Cat Part No LD06103023 LED or equivalent makes as in Appx 'B'

Taking down unserviceable MCBs and supply and fixing MCB 6 to 32 amps, SP 240 volts, complete all as specified and directed.

Taking down unserviceable MCBs and supply and fixing MCB 6 to 32 amps, SPN 240 volts, complete all as specified and directed.

Taking down old unserviceable sub main wiring 4.00/6.00 Sqmm 1100 volts grade 2/3 runs of single core PVC insulated, unsheathed copper conductor including taking down casing/caping/PVC conduit and making good the surface complete all as specified and directed.

Supply and fixing sub main wiring with two single core PVC insulated cable with copper conductor stranded and sheathed of size 6 sqmm, two runs in and including PVC concealed conduct medium grade of size not less than 25mm dia including PVC accessories complete incl cutting and chasing and making good etc incl one run of 6 sqmm PVC insulated unsheathed multi stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed. Note : Two run of 6 sqmm cabl;e & one run of 6 sqmm including PVC conduit 25mm will be measured as one unit.

Supply & fix decorative wall mounting type made up of polycarbonate rings , and glass shade with lamp holders, connectors block, 1x15 watt LED bulb , glass fitted engineering plastic B22 d lamp holder with electrical copper contacts, self screwed polycarbonate diffuser in opal finish for soothing light effect, LED 15 watt etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable complete all as specified and directed.Make : Havells Cat part No. LHDL03160099 or equivalent as in Appx 'B' complete all as specified and directed.

Supply & fix bulkhead fitting decorative ceiling/wall mounted bulk head with engineering plastic housing and top frame with opal PMMA diffuser suitable for 1 x 06 watt LED bulb including 1 No 06 watt LED complete all as specified and directed.Make: Cat part No. CG80IB6WLED of C&S electric or equivalent as in Appx 'B' .

Taking down old unsv DB and S&F factory made sheet metal enclosure double door distribution board class IP-43 with 200 amp rated copper bus bar 240 V, 8 way single pole and neutral link complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. .

S&F electronic type fan regulator 5 step, 80W, 240 V, 50Hz, AC on existing phenolic laminated sheet etc. suitable for ceiling fan complete all as specified and directed.

Taking out old UG cable and Supply and lay cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric cable heavy duty electric cable with aluminium conductor of size 25 sqmm 3.5 core , 1100 volts grade, complete all as specified and directed.

Taking down of old LT panel with accessories including electric energy meter and Supply, installation, testing and commissioning of LT panel size 800mmx600mmx150mm enclosures cubical weather and vermin proof totally enclosed made out of not less than 2.0mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 volts, 50Hz double door with front openable and PVC acrylic glass cover of suitable size for checking of meter reading without opening door with locking arrangement inc inner shutters for mounting switch gear etc suitable arrangement for fixing of electrical meter and SPN 40 to 63 amp including pre wiring from bus bar to meter and meter to MCB SPN (for pre wiring use 6.00 sqmm single core copper cable and suitable size of lugs for connecting from bus bar to meter and meter to MCB SPN ) including bottom gland plate with sufficient numbers of circular cable entry holes, including pre wired complete as per drg with masonry work for fixing in wall duly powder coated with comprising of following INCOMING :- (i) MCCB 63 amps FP, 415 volt 25 KA adjustable thermal & fixed magnetic setting ICS=100 %=01 No (ii) Phase indicating lamp LED type with HRC fuse= 1 set of three. (iii) ON/OFF indicating lamp on oncomer feeder for status of feeder= 02 Nos (iv) Aluminium bus bar 200 amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc- 04 Nos OUTGOING (i) MCCB 32 amps, 415 volt,10 KA single pole and neutral = 04 Nos (ii) S&F single phase electronic energy meter with LCD display of rating 5-30 amp class 1, 240V 50Hz counter type display with transparent hinge including connection from SPN to meter with 6 sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-charge.

Taking down old unserviceable GI pipe and Supply & fixing 40mm dia GI tubing medium grade complete with all fittinggs (ISI Marked) laid in trenches/fixed to wall and ceiling or laid in floor complete all as specified and directed.

M&L for excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth in soft/loose soil for laying of cable/GI pipe and getting out complete all as specified and directed.

Returning filling in including spreading,levelling,watering, well ramming in layers not exc 25 cm each complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cables all as directed and directed Note : Punned down thickness shall be measured.

KAMAL AGGARWAL

Gurjit const co

M/S Satguru enterprises