PROVN OF SOLAR STREET LIGHTS (ALL IN ONE) INCLUDING POLE AND OTHER CONNECTING ITEMS AT CERTAIN LOCATION AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD

Amount

Supply and Fix All-in-One Solar Street Light high power LED cool white (6000k-6500k) Mono Crystalline Solar PV Module, Lithium ion / Lithium Ferro Phosphate battery with PIR sensor , High Efficacy LED, 30W aluminium extructed body , All - in - One SSL specially designed by progressive Intelligent Dimming which automatically control the dimmimg and brightness of light for 12hours mode with 100% brightness on movement detection limited to 2 hours or 240 cycles of PIR and 33% brightness for rest of time till morning , which increse the backup time having Over Charge Protection, Deep Discharge Protection, Over current Protection, Short circuit Protection, Over Voltage Protection with following tech specification :- (a) Working Temperature - -25°C to 65° C (b) Solar PV Module - 12V60W- Mono-Crystalline (c) Battery (LiFeP04) with BMS - 12.8 V 24 Ah (d) Backup - 2 days (e) Efficiency - > 93 % (f) Lumious Efficacy - 125 lumen / Watt (g) Colour Temp - 5700 K (h) life Span - > 50000 hr (i) Driver - Inbuild DC-DC type (j) Body - Aluminum Extructed Body Note : Light fittings shall only procured after approval manufacturer/make by the GE.

Supply and errection in true vertical position 6 mtr long MS pole on pcc foundation suitable for 47 m/s wind speed with 4-8, 590mm PCD of foundation bolts complete with MS base plate of 300mmx300mmx6mm at bottom and swages from base to top in such manner that 114.3mm x 3.65mm upto 3 metres, 88.9mm x 3.25mm upto 1.5 metres , 76.1mm x 3.25mm upto 1.5 metres, above base plate with arm to fix solar street light at top and final tape plug, bolts, nuts, washers and screws incl painting with black bituminous paint two coat over one coat of red oxide primer after errection complete and marking pole number on pole complete all as specified and as directed by Engineer-in-Charge. Note : (i) Earth work and PCC foundation work shall be measured and paid separately. (ii) Description as per direction of Engineer-in-Charge will be printed on each pole without any extra cost.

Material & Labour for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in foundation bed of poles/stays etc, complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in copings of poles/stays etc including necessary form work, complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr in deep and getting out in Hard/Dense soil for foundation of pole laying of cables, etc complete all as specified and as directed by Engineer-in-Charge.

Removing excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

M/s Durga Traders (BID ID -3306319)

M/s NEERAJ KUMAR (BID ID -3305778)

M/s Dhapola Elevator and Engineering (BID ID -3312263)

SMT Construction (BID ID -3306175)

M/s GANJOO AND CO (BID ID -3306235)

Powerlite Engineers (BID ID -3305749)

laxmi enterprises (BID ID -3306078)

M/s KUMAR BUILDERS (BID ID -3306505)