Electrical work

Amount

Vaccum Cleaning of existing optical type smoke detectors installed inside control room, battery room and other associated areas. The work includes the removal of smoke detector from its base and after cleaning of the detectors re-fixing of the smoke detector to the base along with keeping the connection of detector healthy including minor repairs of lugs/terminals etc.

Checking of the manual call point by breaking of the glass and then replacement of the glass with the new glass to ensure the proper functioning.

Checking of the operation of Hooter installed inside and outside of the control room for its proper functioning by creating artificial fault.

Proper checking of response indicator installed inside the control room and other associated area.

Replacement of SMF battery with suitable rating as required for 24 hour backup make Excide/Amco/standard make

Repairing/replacement of control card of 08-12 zone fire alarm system along with the replacement of all the faulty display and micro controllers inside the panel.

Supply of installation of backlit facility for control room building marking for various emergency and fire exit.

Work of cleaning of panel 08-12 zone, along with the checking each zone for its proper functionality, replacement of faulty connectors. The work includes proper functioning of AC/DC fuse indication by removing the fuse, functioning on battery (AC fail), checking of earth fault and checking of individual Zone to ensure the working.

Providing of 1.5 Sq mm multi stand copper cable

Providing & fixing of optical type smoke detector .The detector while sensitive to all type of smokes will be insensitive to ambient light , air draft and changes within the operating temperature and voltage ranges. The Detector shall met the requirements of either EN 54/FM/UL or LPC and shall be specifically approved FM/UL/LPCB Appollo/System sensor /Edward/ Bosch

TIRUPATI ELECTRICALS (BID ID -5338364)

Jagad Electrical & Fabricators (BID ID -5317171)