REPLACEMENT OF METER BOXES, EARTHINGS, IMPROVEMENT TO E/S INSTALLATIONS UNDER GE NRC.

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

M&L for dismantling of existing kerb stone and S&F of LED kerb stone outdoor type IP66, having high quality plastic and fiber high capacity material with 1200 Kg load carrying capacity length 500mm, width 150mm and height 120mm in white, red or as per requirement at site colour, LED light with PCB in metalcore, length of PCB 280mm width 25mm, LED driver having variable voltage and constant current, Input voltage 90 volts to 300 volts, AC, 50 Hz and as per IS 16104, Opearating voltage 220 volts, THD below 10 % operating Temp 30 to 60 degree celcius, driver having protection : Short circuit, overload- voltage- heat protection, surge protection upto 4 kVA complete all as specified and directed.

Supply, fixing, install and testing in replacement of 7 mtr height, top outer dia 105 mm, bottom outer dia 215 mm, translucent conical pole glass fibre reinforced with polymer matrix combination of fibre glass and resin making it a strong having a highest technology has filament winding by using CNC method, glass content of 65 to 70 %, specific garvity 1.42g/CC, die-electric strength 40 KV/mm, tensile strength 225Mpa, water absorption 0.3% flexural strength 269mpa, Izod impact strength of 80 k/Jm², barcol hardness of 45 BHU, Tensile module of 9000Mpa, Surface resistivity of 1.6x1016Ω, tensile modules of elasticity 22918 N/mm² complete including shockproof, maintenance free, Non conductive, light in weight, wind speed sustainability is 150 KM/H, base plate is made in GFRP material with customized LOGO and LED strips (LED strip colour specified by Engineer in Charge) complete all as specified and directed. Note : Rate for LED strips, RCC foundation as per drawing provided by OEM, Excavation, returning filling, 7mtr pole, decorative arm 1 mtr long, junction box, foundation bolts and nuts included in this item rate.

Supply and fixing in replacement of machine pressed precast interlocking paver block any size and shape of 80 mm thickness M-40 grade confirming to IS: 15658-2006 with grey cement and pigment and vibrated with mechanical vibrator, with 30mm thick crushed sand for cushioning all as directed.

Supply, fixing and laying in trenches or fixing or passing through pipe in replacement of 1100 Volts grade heavy duty LT UG cable, 2 core 6 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting , testing and commissioning all as specified and directed.

All as per Ser item No. 7.00 here in before but 2 Core 10 Sqmm

All as per Ser item No. 7.00 here in before but 3.5 Core 35 Sqmm

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

Dismantling of old steel pole / struts any type and size including demolition of concrete, foundation, necessary excavation and earth work and transportation etc.

Supply, fixing and install 7 mtr height mild steel octagonal pole top 70 mm, bottom 130 mm, surface finished: hot dip galvanised, 3 mm thikness with base plate 200x200x12 mm and GI 64 micron, M19x600 EN 8 grade foundaction bolt and 1.5 mtr decorative sword arm - 01 No for light fittings complete including foundation drawing provided by OEM for foundation of pole including MCB 2.5 Amp SP, 230 volts with busbar. Note : Rate for RCC foundation as per drawing, Excavation, returning filling, 7mtr pole, foundation anchor bolts and nuts included in this item rate.

M&L for fire suppression system in LT panel suitable for size of LT panel 4 mtr x 1.8 mtr x 3 mtr complete including fixing of following items:- (a) Fire detection tube - 102 RM (b) 6 Kg clean agent with cylinder valve - 03 Nos (c) End of connector - 03 Nos (d) Pressure switch - 03 Nos (e) Spring top with male connector - 03 Nos (f) Eld plug - 03 Nos (g) T connector - 06 Nos (h) Master control panel - 01 No (j) Electricall fittings and hardware items - 01 Nos

Demolition of PCC of any description above/below ground level exceeding 15cm complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate for pole / struts foundation etc all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate for kerb stone base/ coping including necessary form work and fair finishing of exposed surface of concrete all as specified and directed.

M&L for fire suppression system in LT panel suitable for size of LT panel 5 mtr x 1.8 mtr x 5 mtr complete including fixing of following items:- (a) Fire detection tube - 150 RM (b) 6 Kg clean agent with cylinder valve - 06 Nos (c) End of connector - 06 Nos (d) Pressure switch - 06 Nos (e) Spring top with male connector - 06 Nos (f) Eld plug - 06 Nos (g) T connector - 12 Nos (h) Master control panel - 01 No (j) Electricall fittings and hardware items - 01 Nos

Supply, install, testing and commissioning in replacement of outdoor type LT panel board cum Time switch box suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof and general construction confirming to IS 8623793 comprising of the following :- The shell shall be made out of 2 mm thick CRCA Sheet, front openable single door system with keys. To accomodate incomer /outgoing MCCBs, Contactor and time switch and TPN copper busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. The TPN busbar shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators. MS angle section 40x40x5mm frame,louvers and air vent gasket for natural flow of air. The bottom of the outer shell contains a ditachable plate having provn for entry of armoured cable and service wire of adequate size with glands. The dimension of the shell should be 75 mm space all round. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the panel safely shall be made. The degree of protection of outer shell shall be IP-54. LT Panel having incoming MCCB, outgoing MCCB/MCBs, time switch, contactor, indicator, voltmer suitable for controlling of electric supply of high Mast as per design, (a) Incoming : MCCB 63 Amps, 4 pole, 415 Volts, 50 Hz ICU 16 KA t- 01 No. (b) Outgoing : (i) MNX 50 Contactor - 01 Nos. (ii) Digital time switch - 01 No.

Supply and fixing in replacement of 10 Sqmm, 1100 volts grade, heavy duty, stranded conductor, 2 core cable PVC insulated aluminium conductor served with inner sheathing of PVC sheathed in service connections complete all as specified and directed.

Supply, install, testing and commissioning in replacement of indoor type LT panel board cum meter box suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof and general construction confirming to IS 8623793 comprising of the following :- The shell shall be made out of 2 mm thick CRCA Sheet duly compartmentalized for each control gears and Energy meter, front openable single door system with visible glass for meter reading and keys. To accomodate incomer /outgoing MCCBs and TPN copper busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. The TPN busbar shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators. MS angle section 50x50x6mm frame,louvers and air vent gasket for natural flow of air. The bottom of the outer shell contains a ditachable plate having provn for entry of armoured cable and submain wiring of adequate size with glands. The dimension of the shell should be 75 mm space all round. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the panel safely shall be made. The degree of protection of outer shell shall be IP-54. Continued...

Item No. 20.00 Contd... (a) Incoming : MCCB 63 Amps, 4 pole, 415 Volts, 50 Hz ICU 16 KA - 01 No. (b) Outgoing : (i) MCB 32 Amps, 4 pole, 415 Volts, 50 Hz ICU 10 KA - 05 Nos. (ii) MCB 6-32 Amps, single pole, 230 Volts, 50 Hz ICU 10 KA - 20 Nos. (c) Instrumentation : The inner cubical shall carry the following : (i) Indication lamp 22.5 mm dia LED type, 240 Volts AC at the outgoing of the each compartment to show 3 phase availability at the outgoing - 15 Nos. (ii) Copper wiring of adequate size with cable tray. (iii) Dismantling of existing energy meter and re-fixing of energy meter with fixing of copper conductor cable and lugs.

Supply and fix cross arms. Bracings, support channel, backpate hooks etc fabricated from structural steel, sections (MS Channel) of required size and shape including nuts, bolts,washers, welding, bending , cutting cold or hot, drilling holes for inserting bolts as indicated and directed including painting with one coat of red oxide primer and two coats of silver aluminium paint complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with screws on LT pole of size 20x15 mm

Supply and fixing in replacement of timelite distribution board digital time switch 65 Amp, 3 pole 230 volts cat ref TL065DB0 of IndoAsian or equivalent complete including Contactor and Digital type time switch.

Supply, install, testing and commissioning in replacement of outdoor type cubical panel board suitable for 3 phase 4 wire 415 Volt, 50 Hz and type tested at CPRI at 415 Volt factory fabricated in an approved factory having modern fabrication process powder coated in approved shard having thickness not less than 100 mircrons provided with suitable gasket to make it dust /vermin proof and general construction confirming to IS 8623793 comprising of the following :- OUTER SHELL : The outer shell shall be made out of 3.15mm thick CRCA Sheet and MS angle section 50x50x6mm frame, factory fabricated with front and back openable double door system locable / openable by keys from both side having chromium plated 19 mm dia fancy lock, louvers and air vent gasket for natural flow of air. The bottom of the outer shell contains a ditachable plate having provn for entry of armoured cable of adequate size with glands. The dimension of the shell should be adequate to accomodate inner shell described below giving minimum 75 mm space all round. Provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the panel safely shall be made. The degree of protection of outer shell shall be IP-54. Continued...

M&L for fire suppression system in LT panel suitable for size of LT panel 6 mtr x 1.8 mtr x 6 mtr complete including fixing of following items:- (a) Fire detection tube - 162 RM (b) 6 Kg clean agent with cylinder valve - 07 Nos (c) End of connector - 07 Nos (d) Pressure switch - 07 Nos (e) Spring top with male connector - 07 Nos (f) Eld plug - 07 Nos (g) T connector - 14 Nos (h) Master control panel - 01 No (j) Electricall fittings and hardware items - 01 Nos

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine for LT underground cables suitable for 0.4 Mpa working pressure complete all as specified and directed.

Taking down after disconnecting of cable connections from old burnt/ unserviceable MCCB and Supply and fixing of MCCB 100 Amps TP, 415 V with thermal magnetic setting and breaking capacity 16 KA capacity, retrofit complete with fixing arrangement in the existing LT panel board complete all as specifiedand directed by Engr in Charge.

Taking down after disconnecting of cable connections from old burnt/ unserviceable MCCB and Supply and fixing of MCCB 160 Amps FP, 415 V with microprocessor release and breaking capacity 36 KA capacity, retrofit complete with fixing arrangement in the existing LT panel board complete all as specifiedand directed by Engr in Charge.

All as per Ser item No 28.00 here in before but 250 Amps, 4 pole, 36 KA.

All as per Ser item No 28.00 here in before but 400 Amps, 4 pole, 36 KA.

All as per Ser item No 28.00 here in before but 630 Amps, 4 pole, 50 KA.

Supply, fixing, install and testing in replacement of 0.75 mtr height, top outer dia 90mm, bottom outer dia 90mm,translucent bollard glass fibre reinforced with polymer matrix (GFRP) combination of fibre glass and resin making it a strong. HELIPOLE having a highest technology has filament winding by using CNC method, glass content of 65 to 70 %, specific garvity 1.42g/CC, dieleectric strength 40 KV/mm, tensile strength 225Mpa, water absorption 0.3% flexural strength 269mpa, Izod impact strength of 80 k/Jm², barcol hardness of 45 BHU, Tensile module of 9000Mpa, Surface resistivity of 1.6x1016Ω, tensile modules of elesticity 22918 N/mm² complete including shockproof, maintenance free, Non conductive, light in weight, wind speed sustainability is 150 KM/H, base plate is made in GFRP material complete all as per specified by Engr in Charge. Note : Rate for LED strips, PCC foundation, Excavation, returning filling, Bollard 0.75 mtr, foundation bolts and nuts included in this item rate.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 143450.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Santhi Enterprises (BID ID -3391934)

Abhiraj Enterprises (BID ID -3391452)

shubham Enterprises (BID ID -3390868)

M/S YASH ELECTRICAL (BID ID -3392303)

sapana enterprises (BID ID -3392536)

Rama Electricals (BID ID -3392731)

SHRI SULAI ELECTRICALS (BID ID -3390721)