Strengthening of Road (Resurfacing of 24M wide road in Sector-85) Noida

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m, as directed by engineer-in-charge. The Contractor has defect different utilities like sewer line, water supply line, electric cable, telephone cable , gas pipe line etc, using utility decteting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-charge.

Supplying and stacking at site. 53 mm to 22.4 mm size stone aggregate.

P/L applying Tack coat using straight run bitumen of grade 80/100 on bituminous surace 0.50 Kg/Sqm.

Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler. transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Morth specification clause No 505 complete in all respects.

Providing and laying Bituminous concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent by weight of total mix and filler. transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem roller to achieve the desired compaction as per Morth specification clause No 507 complete in all respects.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.

Providing and laying of hot applied themoplastic compound 2.5 mm thick including reflectrosing glass boads @250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass level, uniform and free from streaks and holes rate are inclusive of all taxes, royality etc all T&P/machine material and labour required for proper completion of work.