REPAIR/ MAINT OF FENCING, FOOTPATH, SIGN BOARDS ETC, STREET LIGHT, PERIMETER LIGHT, GARDEN LIGHTS POST TOP LIGHTS, STREET LIGHT POLES AND OTHER CONNECTED WORKS AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

Dismantling brick work (laid flat or on edge) in floors, channels kerbs aprons etc laid dry and pointed in cement mortar complete including removing of materials obtained from demolition from worksite to outside MD land at any distance complete all as specified and directed.

M&L for Brick work with well burnt bricks having crushing strength 75kg/sqcm laid flat in floor/tappered wall of drain, bedded & jointed in cement mortar 1:6 and pointed in pointed in cement mortar 1:6 using old size bricks complete all as specified and directed.

All as per item No 2 above but except bricks complete all as specified and directed.

M&L for brick work with well burnt bricks having crushing strength 75 kg/sqcm laid on edge in floors/tappered wall of drain, bedded & jointed in cement mortar 1:6 and pointed in cement mortar 1:6 using old size bricks complete all as specified and directed.

All as per item No 4 above but except bricks complete all as specified and directed.

Demolition of brick work built in cement mortar etc complete all as specified including removing of materials obtained from demolition from worksite to outside MD land at any distance complete all as specified and directed.

M&L for brick work built in cement mortar 1:4 with well burnt bricks having crushing strength 75 Kg/sqcm straight or curved on plan exc 6 m mean radius etc complete all as specified and directed.

All as per item No 7 but except brick complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. including removing of rubbish material from work site complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of cement base primer on newly plastered wall surface including preparation of surface etc complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation or mass concrete etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in copings including use of form work straight or curved etc complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including removing rubbish from worksite outside MD land at any distance complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1using 20mm graded stone aggregate as in cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving of any description not exc 15 cm thickness (below or above GL) including removing materials obtained from demolition from worksite outside MD land any distance complete all as specified and directed.

M&L for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate as in surface chanel and drain complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for PCC type B-2, 1:2:4 (using 40 mm graded stone aggregate) 75 mm thick as in Sub Base of floors/hardstanding etc and finished the cement concrete surface complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (40mm grade stone aggregate) 70mm thick as in floors/ plinth protection /paving finished even and fair complete all as specified and directed.

M&L for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick, as in path /paving / flooring finished even and smooth without using extra cement including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in Concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L for reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in precast poles, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 Sq. cm. and n. exc 250 Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 24 above but 6 mm to 8 mm dia complete all as specified and directed.

Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody complete all as specified and directed.

Supply only chain link fencing made out of 3.15 mm dia galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh, made up into mattresses or cages complete all as specified and directed.

Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. Note : MS flat iron and nuts and bolt shall be measured and paid under respective items and old material shall be obtained from dismantling item here-in-before.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete including removing dismantled material from work site complete all as specified and directed.

S&F for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc, complete, drilled for fixing of steel sheeting or other covering doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W (Gde-E-250) quality -B including dismantling of old rusted structuralsteel and removing from site complete all as specified and directed.

S&F for Framed work such as grills,gratings, fencing posts etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide of surface exc 10cm width or girth complete all as specified and directed.

Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, including removing of rusted unserviceable wire from work site and keep serviceable wire for reused in safe custody complete all as specified and directed.

M&L for Mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and Provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) complete all as specified and directed.

M&L for replacement Concertina coil 610 mm dia having 50 Nos of turns in each coil weighing approx 8.5 kg/coil fabricated from PTC, anti rust coating of specification as indicated below extendable upto a length of 6 meters enabling adjacent coils to be jointed by special galvanized steel clips in order to form a long stretch of continuous barrier complete. Specification of PTC : Punched tape coils of approx weight 8.5 kg/coil and length 6m (approx) PTC round in shape, made of GP sheet 5mm and high tensile HC wire 2.6 mm, with blades of size 19 mm+ 2mm, at a distance of 24 cm and it is coated with anti rusted paint for maximum corrosion both sides resistance and durability and also providing camouflage effect complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 mix using 40 mm (graded crushed stone aggregate) in foundation, filling & mass concrete, complete all as specified and directed. Note : Alternate 10th post, corner posts and posts to be laid in low lying area at the discretion of Engr-in-Charge shall only be embedded in PCC.

M&L for Mild steel round bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for chain link mattresses, as in tie bar strengthing and fising with nuts & bolts. complete all as specified and directed.

M&L for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 but n exc 15cm long and 11 to 15 mm dia of shank complete all as specified and directed.

M&L for spot welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length, thickness of metal to be welded exceeding 6 mm and not exceeding 9mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified and directed.

M&L for preparation of new concrete surfaces of fencing post and applying two coats of cement base paint complete all as specified and directed.

S&F for MS flat iron of any size confirming to Fe-290 Gde E-165 cut to length of reqd size, bent to shape, drilling holes, noching for wire etc to fencing posts for securing chain link fencing with nut & bolts or clamps complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm square with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos MS angles of size 35x35x5 mm to a vertical post made up to MS Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc complete as per drawing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable,pole or stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath / pavments etccomplete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. Note : Punned thickness shall be measured.

Supply and lay in trenches brick, common burnt in clay, building brick, sub class 'B' designation 75 for cable protection complete all as specified and directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and directed.

Taking down or out existing cable of sizes 2/3.5/4 core 6/10/16/25 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester), stacking and rolling unserviceable cable for further disposal complete all as specified and directed. Note : (a) Excavation / cutting of road or floor/ GI pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule (b) Serviceable brick protection to be stacked carefully for counting and re use.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm 2 core complete all as specified and directed.

Relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 2/3.5/4 core 6/10/16/25 sqmm in trenches / ducts / along walls / poles / under road etc including necessary new cable lugs, glands etc complete all as specified and directed.

M&L for boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe of size upto 50mm etc complete all as specified and directed.

M&L for painting of erected steel tubular swaged poles of LT over head line/ street light (except embedded portion), 8.5/9 Mtrs long complete including all MS work mounted on pole, earth protection & water pipe (if exists) by necessary preparation, cleaning including scrapping up of old corroded paint dirt/ dust/ rust carefully and applying two coat of aluminium paint and providing 03 Nos bands/ straps with blue colour synthetic enamel paint (any tint 30 cm wide each) from top of plinth block and writing of pole number with white synthetic enamel paint on black ground complete all as specified and directed.

S&F in replacement PVC insulated and PVC round sheathed, copper conductor industrial cable 1.5 sqmm, three core of copper conductor for connection of street light/Flood light / post top lanterns/garden lights etc. fittings on pole / wall / pillar from over head conductor / junction box / DB including termination clip etc complete in all respect through existing GI tubing of size 15mm/20mm dia complete all as specified and directed.

S&F in replacement PVC insulated and PVC round sheathed, copper conductor industrial cable 2.5 sqmm, three core of copper conductor for connection of street light/Flood light / post top lanterns/garden lights etc. fittings on pole / wall / pillar from over head conductor / junction box / DB including termination clip etc complete in all respect through existing GI tubing of size 15mm/20mm dia complete all as specified and directed.

S&F in replacement of LED street light 70 W, 230 volts, 50 Hz, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having driver compartment with IP66 protection suitable for mounting on pole etc complete all as specified and directed. Make: Crompton Cat Part No. TRP-409-70-57-SL-GL-NSG/ Philips Cat Part No. BRP062 LED 82 CW SLA S1 PSU.

S&F in replacement of LED street light 60 W, 230 volts, 50 Hz, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having driver compartment with IP66 protection suitable for mounting on pole etc complete all as specified and directed. Make: Crompton Cat Part No. TRP-409-60-57-SL-GL-NSG/ Philips Cat Part No. BRP062 LED 65 CW SLA S1 PSU.

S&F in replacement of LED street light 45 W, 230 volts, 50 Hz, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having driver compartment with IP66 protection suitable for mounting on pole etc complete all as specified and directed. Make: Crompton Cat Part No. TRP-417-45-57-SL-LM-NBK.

S&F in replacement of LED flood light 150 W, 230 volts, 50 Hz, energy saving, environmental friendly, long life, die-cast aluminium housing, non integral, IP66, flood light with high power LEDs as light source complete all as specified and directed. Note : The bracket for flood light is deemed to be included in item qoated rate. Make: Crompton Cat Part No. TFS-504-150-57-NL-SL-GL-NBK.

S&F in replacement of LED flood light 200 W, 230 volts, 50 Hz, energy saving, environmental friendly, long life, die-cast aluminium housing, non integral, IP66, flood light with high power LEDs as light source complete all as specified and directed. Note: The bracket for flood light is deemed to be included in item qoated rate. Make: Crompton Cat Part No.CFS-501-200-57-60D-SL-GL-NGG.

S&F in replacement of LED flood light 50 W, 230 volts, 50 Hz, energy saving, environmental friendly, long life, die-cast aluminium housing, non integral, IP66, flood light with high power LEDs as light source complete all as specified and directed. Note: The bracket for flood light is deemed to be included in item qoated rate. Make: Crompton Cat Part No. CFS-504-50-57-60D-SL-GL-NSG/ Philips Cat Part No. BVP120 LED 70 CW FG S1 PSU GR.

S&F in replacement of LED bollard of 10 Watt, 230 volts, 50 Hz, IP65, new generation, energy saving, environmental friendly, long life, aesthetically designed with symmetrical light distribution, landscape luminaire with high power LEDs as light source and accessories such as pre-wired etc including PCC (1:4:8) Block of size 30cmX30cm X30cm and necessary earth work fixing arrangement complete all as specified and directed. Make: Crompton Cat Part No. LBLTW-10-CDL.

S&F in replacement of LED Post top lantern of 40 Watt, 230 volts, 50 Hz, IP65, new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and accessories such as pre-wired etc suitable for gate light complete all as specified. Make: Crompton Cat Part No. CBP-610-40-57-SL-CA-NBK.

S&F in replacement of LED Post top lantern heritage type of 20 Watt, 230 volts, 50 Hz, IP65, new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power WARM WHITE LEDs as light source and accessories such as pre-wired etc with and including 2.5Mtr GI pipe 40mm dia painted in black colour with suitable foundation PCC works as per direction of Engr-in charge complete all as specified and directed. Make: Crompton Cat Part No. LPTH-20-WW.

M&L for steel tubular poles of street light complete with cast iron base plate, finial taper plug bolts, nuts & screws as specified type 410 SP-31, 9.0 meter long including painting all external exposed steel surfaces with two coats of aliminium paints over a coat of red oxide zinc chrome primer and all external surfaces in contact with concrete with two coats of black bitumenous paint complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for construction of PCC foundation platform with PCC 1:3:6 type C2 (40mm graded aggregate) in foundation of street light pole including necessary earth work, frame work complete all as specified and directed.

M&L for construction of PCC foundation platform with PCC 1:2:4 type B2 (40mm graded stone aggregate) in coping of street light pole including necessary earth work, frame work complete all as required at site complete all as specified and directed.

M&L for construction of PCC foundation platform with PCC 1:4:8 type D2 (40mm graded stoen aggregate) in foundation including necessary earth work, frame work complete all as specified and directed.

S&F in replacement of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 205 x 255 x 112 mm suitable for 16/25 sqmm cable fixed to pole/ wall with suitable FI clamp 20X3 mm nuts, bolts and washers including provision of 01 No MCB, single pole, 240 volts, 10 KA 10 Amps, and suitable aluminium bus bar/ connector complete all as specified and directed.

S&F in replacement of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 130 x 130 x 77 mm suitable for 16/25 sqmm cable fixed to pole/ wall with suitable FI clamp 20X3 mm nuts, bolts and washers including provision of 01 No MCB, single pole, 240 volts, 10 KA 10 Amps, and suitable aluminium bus bar/ connector complete all as specified and directed.

S&F for GI Pipe of 40 mm dia medium grade bend to shape of 1.2mtr length GI/MS clamp and nutbolts of suitable size for street light bracket including re-fixing of street light of any type and capacity taken down under sch sl No 04 complete all as specified and directed.

M&L for dismantling and taking down of existing unserviceable single fittings for repair, maintenance of street/ security/ perimeter/ garden/post top lantern light fittings etc of LED of any wattage or make from pole/ wall/ building/ tower at any height by disconnecting electrical connections and repairing by split opening the same in to the parts for fault finding and replacement of unserviceable spare parts i.e. surge arrestor, LED driver, wire, pipe etc with same capacity, testing and refixing at same location or as directed after necessary repair complete all as specified and directed. Note :- (i) The Supply of spare parts i.e. surge arrestor, LED driver, wire, pipe etc shall be measured and paid seperately as supply only. (ii) minor spare parts such as nuts, bolts, washers, cotton waste etc deemed to be included in the quoted rates. (iii) Inventory of all defective parts required to be replaced will be recorded in a separate register alongwith pole No & location / area and type of light fittings before replacement duly signed by JE, Engineer-In-Charge & contractor and the same shall be produced at the time of payments for verification.

Supply only of street light driver of 45 watt complete all as specified and directed.

Supply only of street light driver of 60 watt complete all as specified and directed.

Supply only of street light/flood driver of 150 watt complete all as specified and directed.

S&F for cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 2/4 core XLPE, armoured, Al conductor cable of size 10 to 16 sqmm,Outdoor type for joininng of damaged cable complete all as specified and directed.

S&F in replacement of GI light grade cable protection pipe 20mm dia including all accessories complete all as specified and directed.

S&F in replacement of automatic nature timer (based on lux level of natural light) based street light panel 3phase, 12-18kW, IP66 with in-built nature switch, power contactor, incoming & outgoing 40A TP MCB, pole/ wall mounted type, thermoplastic polymer weather proof enclosure, internal connecting cables complete all as specified and directed.

M/s. Chanda Construction (BID ID -3351111)

FREEZCON (BID ID -3349452)

Dilip Kumar (BID ID -3350832)

Construction House (BID ID -3351211)

Prova Stores (BID ID -3351426)

M/S Build Tech (BID ID -3351592)