E.I. Work including fire detection system at Ashutosh Museum, College Street Campus under University of Calcutta.

Amount

Dismantling the existing defunct old fans, fittings, fixtures, wiring, PBDB, SPN BDB, power plug, wooden board's etc by cutting wall from location with interconnection including mending good the damages and deposited the same to the section store (Less salvage value).

S & Drawing of 4 core 35 sq mm PVC/A cable incl. supply & laying of 2 nos 10 SWG GI wire on wall by MS saddle. (Make-- KEI/Gloster/ Havells)

S & F double door 6 way TPN MCBDB with IP-42/43 protection concealed in wall incl. S & F 1no.415V 63A four pole isolator as incomer & 18 nos. 16-32A SP MCB as outgoing incl. inter connection with suitable size cu.wire & mending good the damages to original finish. (Make: Legrand/Crabtree/L & T )

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for HTPN DB enclosure on angle iron frame on wall & mending good the damages to original finish (Make-Legrand/L&T/Crabtree) as to GS.

S & F compression type gland complete with brass gland, brass ring for 4 core 35 sq mm PVC/A cable.

Finishing the ends of 4 core 35 sq mm PVC/A cable by crimping method incl. S & F dowells solderless socket,tapes, and jointing materials etc. as per GS.

S & F 240 V 6-10A per way (12+2) way SPN MCB DB with SS encloser Double door with 1no. 40 A DP isolater as incom -mer & 10 nos. SPMCB ( C curve ) as outgoing on angle iron frame on wall as per G.S. (Make: Legrand/L&T/SIEMENS )

S & F MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat incl. making good the damages to building roof with satisfactory finishing by skilled labour --(As per drawing no. 475 of PWD specification book-May 1991)

Distn. Wiring in 2x22/0.3(1.5 sqmm) single core stranded FR PVC insulated & unsheathed cu wire in 20 mm size PVC rigid conduit FR (Precision make) with 1x22/0.3 (1.5 sq mm) single core stranded FR PVC insulated & unsheathed cu wire for ECC to light/fan/call bell points with modular type switch (Brand approved by EIC) fixed on modular GI switch board with top cover plate & 2 nos suitable size Ph & N cu bar & earthing attachment fixed on wall incl. mending good the damages to original finish.(Average run-- 12 mtr)

do -do- to 5A 5pin flush type plug socket and 5A moduler type switch (Make: Crabtree/Anchor/Legrand) on moduler Box incl. necessary connectionas reqd. (on board)

S & F 240V 2 Nos. 6A 3 pin moduler type plug socket & 2 nos 6A switch (Make: Anchor ROMA/Legrand Mylinc/Havells-Crabtree) on 6 module G.I. moduler type switch board on wall incl. S & F Switch board and cover plate and making necy. Connections as reqd.

S & F 240V 1 no 16A 3 pin & 3 nos 6A 3 pin modular type plug socket with 1 no 16A & 3 nos 6A modular type switch, 16A modular switch type SP MCB (C-curve) & indicator without plug top on 2 row 18 module GI modular type switch board with 2 row 18 module top cover plate flushed in wall incl. S & F switch board & cover plate & making necy connectionswith PVC cu wire & earth continuity wire etc. (For computers & brand approved by EIC)

S & F 240V 1no16A 3 pin moduler type plug socket with 1 no 16A moduler type switch (Make: Anchor/Crabtree/Legrand) on 4 module GI moduler type switch board with 4 module top cover plate flushed in wall incl. S & F switch board & cover plate & making necy. connections with PVC cu wire.

S & F 240V 1no 16A 3 pin moduler type plug socket & switch with 1 no 6A moduler type plug socket & switch (Make: Anchor/ Crabtree/Legrand) on 6 module GI moduler type switch board with 8 module top cover plate flushed in wall incl. S & F switch board & cover plate & making necy. connections with PVC cu wire.

S & Drawing 1.1 KV grade single core stranded FR PVC insulated & unsheathed cu wire (Make: Finolex/KEI/Havells) of following sizes in 20 mm dia PVC rigid conduitincl. Making necy connections .

2x6+1x4 sq mm cu wire

2x4+1x2.5 sq mm cu wire

2x2.5+1x1.5 sq mm cu wire

3x1.5 sq mm cu wire

S & F 240V modular socket type (2 module) stepped type fan regulator (Make:Anchor/Crabtree/Legrand) on existing moduler GI switch board with top cover plate incl.making necessary connections etc.

S & F 48" AC ceiling fan (Make: Orient /Crompton /Usha) complete with down rod, canopy,fork,blades etc. without regulator.

S & F of 2ft x 2ft 36W LED Slim Panel light fittings complete with all accessories suspended from false ceiling/decorated false ceiling with all accessories by GI wire & MS clamp etc as required as per direction of EIC (Make: Crompton-LCTLRNE -36-FO-CDL /Philips-RC380BLED36S-6500G5L60W60 PSU ODSG/Bajaj- BZRSQL36WGZI WH/similar of Wipro)

S & F 18/20 watt round recessed LED decorative type luminaire with broad coller frame as per direction of EIC. (Make:Crompton-CDR-206-18-30-SL-NWH/ Philips-SM251C LED20S-3000PSU WH/ Bajaj-BGSLO SLEEK 18W WH RD/similar of Wipro)

Supply & fixing of Single LED tube light fittings. 4'ft. long Single LED tube light(CDL/WW) fittings complete with all accessories incl. S&F 1 No 18W LED tube with alluminium heat sink body with inbuild driver by L-type M.S.clamp & 2 nos 20mm dia E.I conduit (16 SWG) by M.S. fastner nuts & bolts etc.as per GS. (Make- Philips-TMC 501/Crompton-IGP161LT8-18/Bajaj-BCLAB 18W WH LED P)

Extra for suspension exceeding 25 cm with S & F addl. 2 nos 20mm dia E.I conduit(14 SWG) supports & necy. PVC insulated wire & painting etc. as required.

S & F of 18" (450 mm ) sweep metal body metal blade wall bracket fan by nuts & bolts etc as required as per direction of EIC. (Make - Orient/USHA/Crompton/Cinni)

S & D of 16" (400 mm ) metal body metal blade high speed pedestal fan as required as per direction of EIC. (Make - Orient/USHA/Crompton/Cinni)

S & F Track mounting accent lighting luminaire with compact housing and slim gear box with colour rendering index of 90 (Make: Philips ST 700T LED10 930PC PSU-E NB 1C WH IN/similar of Crompton/similar of Wipro)

S & F 250V, 2W tiltable spot light(3000K) for artifact illumination (Make:Philips Astra spot COB tilt /similar of Crompton/similar of Wipro)

S & F 250V, 3W tiltable spot light(3000K) for artifact illumination (Make:Philips Astra spot COB tilt /similar of Crompton/similar of Wipro)

S & F 250V, 7W tiltable COB spot light(3000K, 630 lumen) for artifact illumination (Make: Philips COB Pro /similar of Crompton/similar of Wipro/similar of Havells)

S & F 250V, 7W beam adjusting surface COB light(3000K, 585 lumen) with aluminium body for artifact illumination (Make: Philips Surface COB/similar of Crompton/similar of Wipro/similar of Havells)

S & F 250V, 5.5W beam adjusting runner hue single spot light(3000K, 230 lumen) with metal body for artifact illumination (Make: Philips runner Hue Single Spot-53090/31/PO /similar of Crompton/similar of Wipro/similar of Havells)

S & F 250V, 2x5.5W beam adjusting Runner Hue wall/Ceiling Spot light (3000K, 460 lumen) with metal body (Make: Philips Runner Hue Wall/Ceiling Light -50312 /similar of Crompton/similar of Wipro/similar of Havells)

S & F 250V, 4x4W beam adjusting Star wall/Ceiling light (3000K, 920 lumen) with metal body (Make: Philips Star Wall/Ceiling light -56244/31 /similar of Crompton/similar of Wipro/similar of Havells)

S & F 250V, 12W picture light (3000K, 420 lumen) with metal body (Make: Philips Nebula Picture light -31441 /similar of Crompton/similar of Wipro/similar of Havells)

S & F 250V, 7W wall washer light (3000K, 250 lumen) with metal body (Make: Philips LED Wall Washer Light -34153 /similar of Crompton/similar of Wipro).

S & F 250V, 45W LED strip light with driver (3000/4000/6500K, 900 lumen/metre, 240 LEDs per metre) (Make: Philips Proglow LED Strip lights/Crompton-LSTGL20-NW / similar of Wipro)

S & F 240V 25A modular type starter with 25A modular switch type DP MCB (C curve) & 4 module GI modular type switch board with 4 module top cover plate flushed in wall incl. S & F switch board & cover plate & making necy. connections with PVC cu wire & earth continuity wire etc. (Make- North-West/Anchor/Legrand )

S & F 240V 25A 3 pin modular type plug socket without plug top & switch with 2 module GI modular type switch board with top cover plate flushed in wall & making necy. Connections with PVC cu wire & earth continuity wire etc. (Make- North-West/Anchor/Legrand )

S & F 240V 25A 3 pin moduler type plug top with indicator incl. making necy. Connections with PVC cu wire. (Make- North-West/Anchor/Legrand)

S & F 25x6 mm GI earth busbar on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with bolts, nuts, washers, etc. as per direction of EIC.

Finishing the ends of the following Cu wire by solderless socket, Tapes, anti corrosive paste. etc.

For 6 sq mm cu wire

For 4 sq mm cu wire

For2.5 sq mm cu wire

For 1.5 sq mm cu wire

LIGHTING SOLUTION

Electromech Engineers Co-Operative Society Ltd.