REPAIR TO ROAD AND ROAD FURNITURE S AT TPT LINE, 3rd LANCER, HATHIKHANA AND CERTAIN LOCATION OF AGE B/R-I AREA UNDER GE GWALIOR

Amount

Scarifying or picking graveled macadam or bituminous macadam surfaces in area exc 400 sqm each and depth exc. 50 mm but n. exc 100 mm complete all as specified and directed.

M&L for 10cm thick (compacted thickness) WBM with coarse aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required with 8 to 12 tonne power roller to gradient and camber required complete all as specified and directed.

All as per Ser item No. 2.00 above but except materials (materials obtained from item No 1 shall used) complete all as specified and directed.

M&L for preparing surfaces or un-surfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10, @ 10 kg per 10 sq metre complete all as specified and directed.

M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous macadam with using paving bitumen VG-10 as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-10 laid/spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) Filling of any pot holes (coming in the area to be re-carpeted) in the above item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate.

M&L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.

M&L for one coat of painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow (retro reflective therno platic road marking paint 1.25mm thick, uniform finish yellow/ white in colour appliedby Machine) complete all as specified and confirming to BS 3262-1989 including cleaning of surface completed all as specified and directed.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed.

M/s Bijender Singh

M/s R.V. Constructions