GE (N) P/TOKEN- 23 OF 2025PROVN OF WALKING PATH AND UPGRADATION OF STN ECO PARK UNDER AGE B/R (CENTRAL) OF GE (N) PUNE -2026

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed

M & L for hardcore of guage n. exc 63mm (broken stone boulders) deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M & L for 75 mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as sub base finished even and smooth without using extra cement, complete all as specified and directed

M&L 25 mm thick jointless EPDM flooring in pathway in any colour mixing with binder and laying by machanically/manual complete all as specified and as directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level] and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

S&F Stainless steel railing of grade 304 with round/squar/rectangular tube with three tier rails, baluster mirror polished, flush joints, Posts, end caps incl fixing in ground with necessary arrangement complete all as specified and as directed

Removing excavated material of soil n exc 50m and depositing where directed at a level n exc1.5 m above the starting point complete all as specified and as directed

Material and labour for preparation of new concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation for shafts, wells, cesspits, manholes, pier holes, pole etc n.exc 10sqm on plan and getting out hard/dense soil complete all as specified and directed

M&L for PCC 1:4:8, type D2 (40mm graded stone aggregate) in foundations,filling and mass concrete complete all as specified and directed

M&L for nominal mix RCC type B-1, 1:2:4 (using 20mm graded aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc basement slabs,under-reamed piles and mass concrete complete all as specified and directed

M&L for nominal mix RCC type B-1, 1:2:4 (using 20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter in rough finished surfaces complete all as specified and directed

-Ditto- all as per item No 13 here in before but in sides of pillars, columns posts, sturts complete all as specified and directed.

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed

-Ditto- all as per item No 15 here in before but 6mm to 8mm bars for stirrups

M&L for AAC (Autoclave cellular Aerated Concrete) block masonry of block size 600mmx200mmx200mm for walls laid and setting in CM 1:6 (Min compressive strength of block 5N/Sq mm, Density 651-750 Kg Cum, IS:2185 Pat 3.) incl bond beam size 200x100mm with reinforcement of 2 Nos of 8 mm dia Fe 500 TMT bars at interval of 1200 mm wall ht, complete all as specified and directed. Make Siporex, HIL Limited, Aerocon, Accofix, ISI marked Grade I as approved by GE.

M&L for moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including 10mm thick backing of cement plaster in CM 1:3 complete all as specified and directed

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms in vertical surfaces and including 10 mm thick bacing coat in CM 1:4 complete all as specified and directed

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

M&L for framed work such as side hung gates, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) Cement concrete as in sub base complete all as specified and as directed

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand of any description complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including of existing as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu m, getting out in hard/dense soil, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm complete all as specified and directed

M&L for PCC 1:3:6, type C2 (40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed

Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, battens for manglore tiles, main columns, posts etc., for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F for 0.63 mm corrugated, galvanised, mild steel sheeting as in roofs, ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for 0.63 mm plain, galvanised, mild steel sheeting as in roofs, ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Roof tiles Mangalore pattern,interlocking at side joints, laid dry complete all as specified and directed

M&L for second class softwood battens squar/rectangular in section at 30 cm centres, Clean sawn secured with nails or brads sec exc 15 sqcm but n exc 25 sqcm complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed

M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixec @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of sash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required complete all as specified and directed. Make : Gyproc-saint Gobain/Armstong/Diaken.

S&F in repair 10 to 12 mm thick decorative/designed AC board as in eaves board and similar work at height exc. 10 m and not exc. 15 m including two coats of synthetic enamel paint a coat of primer complete all as specified and directed.

M&L for coloured vitrified tiles 10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed

M&L for preparation of new mangloe tiles surface and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles roof, complete all as specified and as directed by Engineer-in-charge.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size complete all as specified and directed

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 25mm but n exc 50mm long dia of shank all as specified.

Supply only chain link MS galvanised fencing incl line wire any size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified and directed

Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

K.S.JITE AND SONS (BID ID -3377726)

M/s greenstone construction (BID ID -3377498)

SAGAR ENTERPRISES (BID ID -3377117)

M/s DEVRATAN ENTERPRISES (BID ID -3376206)

THE SAIRAM CONSTRUCTIONS (BID ID -3377297)

M/s.BAJRANG CONSTRUCTION (BID ID -3377446)

SHRINATH CONSTRUCTION (BID ID -3377569)

M/S AKASH ENTERPRISES (BID ID -3377423)

M/S Eknath agencies (BID ID -3377069)

PATILSON CONSTRUCTIONS (BID ID -3377476)