GENERAL FUND-2025-2026-Repair and Maintance of Public Toilet Building and Drain at Ward No.18 Sirumugai Road and Viragu Kadai Area in Karamadai Municipality.

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B the site etc.,complete

Removing of existing old indian make water closet including all cost and convenyace of materials and labour charges etc ..

Dismandling the existing old floor tiles including all cost and convenyace of materials and labour charges etc ..

Dismandling the existing old plain cement concrete including all cost and convenyace of materials and labour charges etc ..

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement including all cost and conveyance of materials and labour charges etc ..

Fly Ash Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering with CM 1:5 mix using 12mm thick including cost and conveyance of materials and labour charges etc., complete as per Standard Specification

Supply and fixing RCC Pre Cast slab 75mm thick in CC 1:2:4 (one cement, two sand and four aggregates) using 20mm HBGS metal excluding cost of Reinforcement grill in position including moulding curing and finishing etc, complete as per standard specification.

Painting two coats of Old plastered wall surface with ready mixed interior / exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Manufacturing, Supplying and fixing inposition of Mild Steel Door using outer frames of size 40x40 x6mm and shutters with 18G CRC sheet in center portion and finishing with necessary locking arrangements, painting with primary coat as directed by size 1.20x2.10M = 2.52M2 departmental officer etc. complete.

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. - 11/4'' PVC PIPE

11/4'' PVC Coupling

11/4'' PVC Elbow

11/4'' PVC MTA

11/4'' PVC BALL VALVE

3/4'' COUPLING

3/4'' GI TAP

4'' PVC PIPE

4'' PVC TEE

4'' PVC ELBOW

Cement concrete in 1:2:4 [one cement and two sand and aggregate using 20mm size ISS grade machine crushed metal including the cost of mixing laying curing etc., complete complying with standard specification.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylumsheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour forPVC Open light / fan Point (for electronic regulator) (5 points per coil) SD22

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Painting the old iron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Supplying and fixing of RCC Chain link fencing post of size 0.10*0.10**2.10m and inclusive of loading, conveyance and unloading at site of work and labour charges for fixing in position etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of Chain link fencing 50 x50mm 10gauge with steel frames of L angle of 50 x50x6mm in Vertical post at 1.80m inteval and horizontal siffners on 25 x 6mm plate at 1m interval etc., including cost of Chain link and inclusive of loading, conveyance and unloading at site of work and labour charges for fixing in position etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing barbed wire fencing using 10 gauge barbed wire 6 horizondal rows for 1mm length.. the rate is inclusive of barbed wire binding wire required for fixing with 'L' angle and labour charges for fixing with the 'L' angle etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

KASTHURI SHANMUGAM (BID ID -1476199)