Repair and Maintenance of PHS in various Residential Govt. Houses of Sector 15, under SDE W/s Sub Division No. 11, Chandigarh (Ch. to 2215 Non Plan)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials.

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 550x400 mm witha pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

610x460 mm bowl depth 200 mm

Providing and fixing White Vitreous Chinaware Water Closet Squatting Pan :

Orissa Pattern WC Pan of Size 580 x 440 mm :

Providing and fixing white vitreous china pedestal type (Europeantype/ wash down type) water closet pan.

Providing and fixing CP Brass jet with Nozzle and flexible pipe complete in all respect.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.

10 litre (full flush) capacity- white

Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete :

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. :

Felixble pipe

32 mm dia :

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank :

Providing and fixing C.P. brass short bib cock of approved make

15 mm nominal bore :

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. as per

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

15 mm nominal bore :

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

15 mm nominal bore, 105 mm long, weighing not less than 138 gms

20 mm nominal bore, 120 mm long, weighing not less than 198 gms

Providing and fixing C.P. brass long body bib cock of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

15 mm nominal bore :

Providing and fixing of PVC cover for water storage tank cover duly ISI marked of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

300 ltr to 1000 ltr cap

Providing and fixing of C.P. brass shower with arm of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of PVC handle for L/L cistern of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing PVC Ball cock for low level cistern of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of S.S Grating with / without hole of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of size 22" x 16" bevelded edge of superior glass of approved quality complete with 5mm thick hard board of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Conversion of OWC to EWC with C.C 1:2:4 with PVC pipe 4" upto 1-1/2 mtr long complete in all respects.

Providing and fixing of C.P Towel Ring of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing CP Soap Dish of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing CP towel rail of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing HCI P Trap of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of CP Pillar tap of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing PVC pipe 6 kg pressure of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing Syphon kit for Low Level cistern of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of SFRC gully trap cover and frame size 375x375x25mm thick of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of SFRC Inspection chamber cover and frame 600x600x35mm thick of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of C.P. waste for wash basin of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of C.P. waste for steel sink of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of S.S Short bend of approved make in the same range of AOR complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Please Enable Macros to View BoQ information