Upgradation of Balachaur Garshankar Hoahiarpur Dasuya road section Balachaur to Garshankar RD 0.00 to 1.85 and 32.60 to 51.400 KM 20.69 KM SH 24 Including Maintenance of Road for 5 Years One Year Defect Liability Period and Four Year Maintenance

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical clause 201 of MORT&H specifications

Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materialsseparately as per technical clause 202 of MORT&H specifications

Construction of Embankment with approved material obtained from borrow pits with a lift utp 1.5 mtr. Transporting to site spreading, gradting to required slope and compacting to meet requirement etc. (Includin Earth Royalty)

Compacting Original ground below road crust Loosening, leveling and compacting original ground upto a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achive minimum dry density as given in Table 300-2 for sub grade construction as per tehcnial cluase 305 of MORT&H specifications.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications

Tack Coat @ 0.25kg per sqm Providing and applying tack coat with bitumen emulsion RS using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications

Providing and laying dense graded bituminous macadam 50mm to 75mm thick with batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 4.5%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 505 of MORT&H specifications

Tack Coat @ 0.25 kg per sqm Providing and applying tack coat with bitumen emulsion RS using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications

Bituminous Concrete 30mm to 45mm thickness(Grading II) Providing and laying bituminous concrete 30mm to 45mm thick with Batch Type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder CRMB-55 @ 5.4%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications

Bituminous Concrete 30mm to 45mm thickness(Grading II) Providing and laying bituminous concrete 30mm to 45mm thick with Batch Type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 5.4%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications