Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹12.1 L+₹2.1 L (21.0%)Rejected-Finance R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹22.2 L+₹12.2 L (121.3%)Rejected-Finance | L3 | Rejected-Finance Not lowest |
Tender Value
₹11.6 L
EMD Value
₹23,300
Closing Date
17 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN- 913138 C/O 56 APO
SPECIAL REPAIRS TO BLDG NO. T-41 AND T-51 AT KIARI MIL STATION UNDER GE 860 EWS
2024_MES_647522_2
138WE/L-114/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 860 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 860 EWS
₹23,300
Yes
16 Jul 2024
22 May 2024
24 Jun 2024
22 May 2024
17 Jun 2024
29 May 2024
Amount
Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the framecomplete all as specified and directed.
S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed
S&F for 30mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed
Demolition of stone/PCC block/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete in CM 1:4 and finishing the surfaces even and smooth (without using extra cement) as specified and directed.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement (internal Plaster) complete all as specified and directed.
M&L for preparation of new plastered surfaces and apply two coats of cement base paint over a coat of primer chalk whiting complete all as specified and directed.
M&L for preparing newly plastered surface and applying two coat of white wash on walls complete all as specified and directed.
M&L for colour glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat of CM 1:4 complete all as specified and directed
S&F for 150mm extruded aluminium handle complete all as specified and directed
S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed
S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed
S&F for 140 mm over all length of cover plate floor door stopper of aluminium alloy body and tounge, anodized with hard drawn steel spring fixed in floor complete all as specified and directed
Hacking out old broken glass of any thickness size or quality from steel frames complete all as specified and directed
S&F for 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed
M&L for preparation of old painted of wood or wooden surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed
M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and directed
Dismantling wall/ceiling board(fibre, pulp insulation etc.) or insulation boards/slabs/blankets, any thickness including fillets complete all as specified and directed.
M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in wall paneling complete all as specified and directed
M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in ceiling paneling complete all as specified and directed
Dismantling of timber fillet under 40 Sq cm in section in framed work. complete all as specified and directed
M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 Sq cm n.exc 13 Sq cm secured with nails or brads. complete all as specified and directed
S&F Vitreous china wash hand basin with , coloured, flat back of size 630 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, fixed in repairs, complete all as specified and directed
S&F in repairs PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description. complete all as specified and directed
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white and trap, including connection to drain (or outgoing pipe) and to flushing pipe complete all as specified and directed
S&F plastic water closet seat, white, closed pattern with flat bottom and cover for pedestal pan complete all as specified and directed
S&F in repairs Tubular Towel rail 600mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed
Taking down of 15mm dia steel tubing and connections, including cleaning for refixing or removal to store or schedule of credit
S&F 16 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed
Taking down of 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store or schedule of credit complete all as specified and directed
S&F 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed
S & F in repair for Bib taps,short body, fancy type, cast copper alloy, brass chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specified and directed
S&F Fancy type, Pillar taps, cast copper alloy, with capstan heads , chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm and fixed in repairs, all as specified.
S&F PVC (SWR) floor trap plain with grating incl jointing with solvent cement of outlet dia 75mm. complete all as specified and directed
S&F in repaie toilet paper holder with flat recessed type stainless steel complete all as specified and directed..
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed
M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding complete complete all as specified and directed
Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6. for laying floor finishes receiving floor tiles complete all as specified and directed
Taking down chowkats or frame not exc 1.5 Sqm with shutters without taking of shutter from the frame complete all as specified and directed
S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed
M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials such as fitting & fixture from the site and also making good disturbed surfaces of wall, floors etc all as specified and as directed
M&L for point wiring complete for one light point / exhaust fan point / bell point controlled by one 1-way switch/ bell push, with 1.5 Sq mm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as specified and directed.
All as per item No above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed
4. All as per item No above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed
All as per srl item no. here-in-before but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-standard) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper standed conductor as continuous earth wire connected to common dolly complete all as specified and directed. All as per srl item no. here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point. complete all as specified and directed
Supply and fixing in replacement switch piano flush button single pole one way 5 Amps complete all as specified and as directed
Supply and fixing in replacement socket outlet 2 in 1, 5 Amp, flush type completeall as spe cified and as directed
Supply and fixing in replacement switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed
Supply and fixing in replacement switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed
Supply and fixing in replacement angular Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed
Supplying and fixing in replacement LED 12 Watt complete all as specified and directed
Supply and fixing in replacement ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed
Supply and fixing in replacement LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size including ceiling rose complete all as specified and directed
Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed
Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed
Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm. complete all as specified and directed
Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Supply and fixing in replacement sheet Metal enclosure single shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed
Supply and fixing in replacement MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed
Supply and fixing in replacement MCB single pole 5 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .
SONAM ANGCHOK
M/S KARAN BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .