SPL REPAIR TO BLDG NO T15 SINGLE JCO ACCN OF DEF AND EMP COY AND PROVN OF TRADESMEN SHOP AT 120 ENGR REGT AND PROVN OF PCC PATH FROM STN GURUDWARA TO ENGR MECHANICAL TRANSPORT AT KPG UNDER GE 867 EWS

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or salimar pattern roof coverings.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications.

Dismantling wrought iron or mild steel work of any description.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry as in floors includig 20mm thick screed bed CM(1:6) all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L 350x 250x 7 mm or 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick rendering in CM (1:4) finished even and rough complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 50 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar (1:3) complete all as specified and directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering ( in two coats 10mm+5mm) on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:6) on Brick/stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and fair (without using extra cement) complete complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coat of cement base paint complete all as specfied and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care putty (Birla white or equivalent) complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper using mechnical spray gun/hand rollars over a coat of interior wall primer with and including 2mm thick wall care putty in two coats (Birla white or equivalent) all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of white wash complete all as specfied and directed.

M&L for preparation of old plasstered surfaces of walls and applying two coat of white wash complete all as specfied and directed.

M&L preparation existing treatment on walls and applying two coats of cement base paint all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.

S&F steel window or ventilator fixed type with glazing bar complete complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 4 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; t both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel complete all as specified and directed.

S&F of 100 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

S&F 125 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.

M&L for reinforced cement concrete type B1 (1:2:4) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & Waste of formwork to sides and soffits of slab/shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed.

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F in repairs 25mm dia curtain rod (curtain rails), alumunium alloy, powder coated with and including decorattive knobs etc complete all as specified and directed.

M&L Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings,including trimming surfaces to receive rendering, etc. with or without reinforcement complete all as specified and directed.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed.

S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

S&F in repairs angle stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S& F Brass CP Basin mixure, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent as approved by GE.

S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Grating doom 100mm dia complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

S&F in repairs water closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonic pipe etc complete including trap set in and including necessary lean cement concrete complete all as specified and directed.

S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts, flushing cistem & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device complete all as specified and directed including dismantling existing EWC complete all as specified and directed.

S&F Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets complete all as specified and directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

S&F 150 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth in foundation and getting out in soft/loose soil all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15 cm and getting out in hard/dense soil all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation, filling and mass concrete all as specified and as directed.

M&L for brickwork with flyash brick, straight or curved on plan nexc in mortar 1:6 using pre cast cement concret Block 1:3:6 type C-1 using 20mm graded stone agg all as specified and directed.

M&L for 40 mm thick Damp proof course B-0,1:2:4 (40mm aggregate) to horizontal or vertical surfaces including necessary formwork.

M&L for spreading and levelling in layers n exc 25 cm thick and ramming uncluding watering as required all as specified and directed.

M&L Hardcore of guage nexc 63 mm,deposited,spread and levelled in layers nexc 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L for 75 mm Plain cement concrete (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for 100 mm thick PCC (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) in foundation,fillings and mass concrete all as specified and directed.

M&L for 15 mm thick rendering on fair face of brick wall or concrete surface in CM 1:6 finished even & fair as in internal surfaces without using extra cement all as specified and as directed.

M&L for 20 mm thick rendering on fair face of brick wall surface in CM 1:4 mixed with WPC @ 2% by weight of cement finished even & fair on external wall as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of walls applying 1mm thick plaster of paris and applying two coats of oil emulsion distemper over a coat of primer coat chalk whiting on plastered surfaces prepara-tory to distempering on walls complete all as specified and directed.

M/L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone agg in plinth protection, paths , steps etc slope 1 in 12 and finished even and smooth without using extra cement with and including all necessary formwork to divide the area in panel, finishing exposed edges fair or rounding or chamfering of exposed edges all as specified and as directed.

Returning filling and spreading leveling watering and well ramming in layers n.exc 25 Cm in soft/loose soil all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the staring point in soft/loose soil all as specified and as directed.

S/F MS plate (Plain or chequered) channels, square cut or notched forming without and attachment. Gde 410-W (Grade E -250 Quality A) all as specified and as directed.

S/F 125 x 60mm presed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plates etc complete as specifed & directed.

S&F 35 mm thick Glazed and skeleton shutters,open rebated and prepared to receive glass, gauge, etc (without sash bars), edges of framing plain,chamfered or rounded,fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-i, section 8, clause 8.24(a) supplied and fitted to chowkats.

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F150 mm long aluminium handle, cast type, anodized all as specified and as directed.

S&F Sheet glass 3 mm ordinary quality and glazing with oil putty in square nexc 0.50 sqm in each pane.

S&F Mild steel works as in grills, framed guard bars, and similar works conforming to F2 290, Gde E-165 all as specified and directed.

M&L for PCC 1:3:6, type C1 using 20mm graded stone agg as in bed blocks for grouting hold fasts,copings, filling in pressed steel chowkat or similar work including necessary formwork as required complete all as specified and directed.

M & L for PCC (1:3:6)type C-1 (using 20mm graded aggregate) as in surface channels,drains including all necessary form work complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings and fixture (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of MS terminal boxes of suitable size with cover plate and frame for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces for one light point controlled by one, one way switch 5/6 Amps. complete all as specified & as directed.

Description all as per item No 112.00 here in before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 112.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No. 112.00 here in before but using 2.5 Sqmm size FRLSH copper conductor cable for one 16 Amp socket outlet on independent board.

Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Modular Bell push 6A 1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.

Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 10W complete all as specified and directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC all as per specified and directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC all as per specified and directed.

Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. , Cat part No LHFOAJE1TN1I060 of Havells or equivalent model of Philips/ Crompton.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting complete all as specified and as directed.

M & L in repair for concealed sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 4.0 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 4.0 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm mm PVC conduit concealed in wall/roo, bends, tee, elbow etc., and making good the disturbed surface complete all as specified and as directed. (Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

M & L in repair for concealed sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 6.0 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 6.0 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm mm PVC conduit concealed in wall/roo, bends, tee, elbow etc., and making good the disturbed surface complete all as specified and as directed. (Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

M & L in repair for concealed sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 1.5 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 1.5 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm mm PVC conduit concealed in wall/roo, bends, tee, elbow etc., and making good the disturbed surface complete all as specified and as directed. (Note Three run of 1.5 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

Supply and fixing TPN DB suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, concealed in wall complete all as specified and directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, concealed in wall complete all as specified and as directed.

Supply and fixing in repairs Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 4 way 240 Volts AC concealed in wall complete all as specified and directed.

Supply and fixing in repairs 415V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 40-63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified and as directed.

Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including taking down unsv one and deposited to mes yard complete all as specified and directed.

Taking down water storage heater (Geyser) and keeping in safe custody of MES store for re-use, refixing the same with all accessories and necessary fixing arrangements complete all as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Supply,laying,jointing and testing, fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 25 sqmm 3.5 core ISI marked ( IS - 7098 Part-1) and its latest amendments complete including taking down unserviceable one all as specified and as directed by Engr-in-Charge.

M & L for Supply and pour natural river sand for cushioning of underground cable in trenches 8 cm below the cable and 15 cm thick over the cable all as directed and specified including watering and consolidation all as specified and directed by Engineer-in-Charge. Note: Punned thickness of sand to be consider for measurement purpose.

M&L Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick.

S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clamps with bolts nuts and washers including taking down unserviceable one complete all as specifed.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

Sri Gupta Construction (BID ID -3360216)

G K SUTHAR (BID ID -3362115)

SANJAY SAW MILL (BID ID -3359197)

M/S JAYSHREE CONCERN (BID ID -3362120)

GYANENDRA THAPA (BID ID -3363716)

GEETA CONSTRUCTION (BID ID -3359138)

S K ENTERPRISES (BID ID -3361421)