Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.6 LAccepted-AOC | L-1 | Accepted-AOC Being Lowest and reasonable | |
| 2 | L-2₹24.8 L+₹91,670 (3.85%)Rejected-Finance | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹28.0 L+₹4.2 L (17.6%)Rejected-Finance | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹32.8 L+₹8.9 L (37.5%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF SRINAGAR
GE AF SRINAGAR AF STN SRINAGAR 190007
CAMOUFLAGING TO BUILDING, ROOFING AND OTHER CONNECTED MISC WORK IN CCD PATTERN AS APPROVED BY STN HQ AT TECHNICAL AREA INCLUDING NO. 2 AREA ETC UNDER GE (AF) SRINAGAR
2023_MES_598991_1
GE(AF)SGR-42 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF SRINAGAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF Srinagar
₹60,000
Yes
21 Aug 2023
29 May 2023
27 Jun 2023
29 May 2023
26 Jun 2023
12 Jun 2023
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge
M & L for rendering 15 mm thick on fair faces of brick wall finished fair & even in CM 1:4 up to 15m height, complete all as specified and directed.
M&L Preparing of new surface of wall and applying two coats of cement based paint over one coat of primer,colour and tint as ordered in CCD pattern up to 15m height, complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of newly plastered surfaces / surface obtain after complete removal of old treatment, and applying two coat of weather proof exterior emulsion paint over a coat of primer colour and tint as ordered in CCD pattern upto 15 metres height on wall / facias / parapets etc, complete all as specified and directed by Engineer-in-Charge.
M&L preparation of old painted steel and iron surfaces of any description by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots of roof /CGI Sheets, steel gates, steel doors, steel rolling shutters, steel eves boards etc, exc 10cm width or girth applying one coat of synthetic enamel paint in colour and tint as ordered in CCD pattern upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
M&L preparation of old or previously treated wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint colour and tint as ordered in CCD pattern upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing surface treatment from the old plastered, pointed / concrete surfaces vertical or horizontal including brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots etc, complete all as specified and directed by Engineer-in-Charge.
M & L for preparation of old plastered / unplastered old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of weather proof exterior emulsion paint, colour and tint as ordered in CCD pattern upto 15 metres height including fascias / parapets etc, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old plastered / unplastered, old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying two coats of cement base paint colour and tint as ordered in CCD pattern complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old plastered / unplastered, old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of cement base paint colour and tint as ordered in CCD pattern complete all as specified and as directed by Engineer-in-Charge.
S&F in repair second class soft wood Weather boarding, clean sawn, thickness 20 mm and rebated on thick edge to give 20 mm laps and fixed in eaves board etc upto 15 metres height, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-In-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge
S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed by Engineer-in-Charge.
All as per item No 14 but except Sheets, complete all as specified and directed by Engineer-in-Charge.
S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth in CCD pattern as approved complete all as specified and directed by Engineer-in-Charge
AAK INFRA PROJECTS
M/S NEW ROYAL CONSTRUCTION CO
M/S M B ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .