PROVISION OF INFRASTRUCTURE FOR MEDICAL OXYGEN PLANT AND FILING SYSTEM AT 7 AFH KANPUR CANTT

Amount

Lumpsum price worked out by the contractor for BUILDING & STRUCTURES” as listed in Sch ‘A” part I representing above / below the lump sum price of Rs. 1967570.00 as inserted by MES for Sch ‘A’ Part I on Sl. Page No.18

Lumpsum price worked out by the contractor for “ROAD/PATH/ HARD STANDING & CULVERT ” as listed in Sch ‘A' part II above/below the lump sum price of Rs. 261297.25 as inserted by MES for Sch ‘A’ part II on Sl. Page No. 19

Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Sch ‘A” part III above/below the lump sum price of Rs. 25,990.80 as inserted by MES for Sch ‘A’ Part III on sl. Page No. 20

Lumpsum price worked out by the contractor for “INTERNAL ELECTRIC ” as listed in Sch ‘A” part IV above/below the lump sum price of Rs. 2722.74 as inserted by MES for Sch ‘A’ Part IV on sl. Page No. 21

Lumpsum price worked out by the contractor for “COMPOUND WALL, FENCING AND GATE” as listed in Sch ‘A” Part V above/below the lump sum price of Rs. 2,41,572.75 as inserted by MES for Sch ‘A’ Part V on sl. Page No. 23

Lumpsum price worked out by the contractor for “SITE CLEARANCE, EXCAVATION & EARTHWORK” as listed in Sch ‘A” part VI above/below the lump sum price of Rs. 40167.20 as inserted by MES for Sch ‘A’ Part VI on sl. Page No. 24

SCH 'A' PART-VIII (MISC B/R AND E/M) (EXTERNAL ELECTRIC SUPPLY) M&L for street light fitting with energy efficient LED street light fitting powder coated PDC aluminium 75 Watt heat resistance toughened glass with lens dimmable (1V-10V DC input control voltage of 10% to 100% ) LED street light fitting with lens complete with all accessories such as LED driver and testing complete connection with copper wire 1.5 Sqmm three core from pole box to street light fitting. (Make : Crompton Greaves /Philips/Wipro/C&S).

Labour for Shifting of LT Panel from proposed oxygen plant site to not exceeding 3 Mtr from existing location including foundation, taking down of all cable connection and refixing of the same all as directed.

Supply & fixing of street light bracket made out of from 40mm dia GI tubing 'light grade' 1.0 mtr long bent to shape including fixing clamps made out of MS flat iron 50 x 6mm thick, 15cm long & 2 Nos of nut & bolts for holding with steel tubular pole including two coat of syenthetic enamel paint over a coat of red oxide primer over MS clamp after prepration of steel surfaces complete all as specified & directed.

S&F LED pattern in extruded aluminium housing with diffuser LED fitting 24 wtt, 4 feet complete including connection from ceiling rose to LED light fitting with three core PVC flexible wire all as specified and directed . Make : Crompton , C&S, Philips .

M&L for point wiring PVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm , 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size Bakelite sheet 3mm thick for mounting switch , socket brass screws and washer including PVC insulated and unsheathed solid copper wire of size 1.5 Sq mm will be used as continuous earth wire for the following :- (a) One light /fan point controlled by one, one way switch

S&F SMC junction box (water proof) of size 250x250x160 for street light poles with connector for connection incoming and outgoing cables including provn of 01 No MCB SP 06 Amp to control the pole light circuit including 04 x aluminium bus bars strips 150x30x3mm of size mounting in the insulator and MS brackets made out of 32x4 mm, F1 clamps with suitable nut, bolts and washers including suitable size of double compression cable glands for incoming and outgoing cables. (Make: Sintex/Finolex/Hensel)

B.K.ASSOCIATES

M/s R.V. Constructions

MITHILA BUILDERS AND ENGINEERS