SPECIAL REPAIR OF BLDG NO P-211, BLDG NO-75, BLDG NO-90, BLDG NO-91, PROVN OF APPROACH PATH ROAD AND PROVN OF DRAIN AND HARD STANDING AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Taking down of cement plaster on walls of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on fair face of brick work or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on fair face of brick work or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed.

M & L for rendering 5mm thick in CM (1:3) on concrete surfaces (ceiling) finished even and fair (without using extra cement) complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of chalk white primer, complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M& L for Preparing newly plastered ceiling surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Complete removal of existing treatment on wall complete all as specified and directed.

M&L for wall care putty in wall1-2 mm thick complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25/18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Kota stone slab 16-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat plaster with CM 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic tiles of approved shade and pattern on vertical surface such as skirting/dado etc. 350X250X7mm/450X300X7mm thick, set and jointed in neat cement slurry over 10mm thick backing coat plaster in CM (1:4) and pointed with cement to match tiles. complete all as directed as specified .

M &L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate finished even and smooth without using extra cement 75 mm thick as in plinth protection complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates as in sub base finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L Chequered cement concrete tiles 20cmx20cmx25mm thick with grey pigment cement, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for precast interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set over 25mm thick sand cushioning all as specified and directed

Dismantling AC (corrugated or semi corrugated) roof sheeting ,of any description, thickness complete all as directed.

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with cranked hook bolt with washer self tapping screws as specified.

S&F Pre-coated galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with cranked huck bolt with washer self tapping screws as in ridge eves, gutter etc complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails of Fe-290 (Gde E-165) and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete.

Dismantling wall and ceiling boards incl cover fillets complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick complete all as specified and directed.

S&F hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M&L for 4mm thick 600x600mm non asbestos fibre cement building boards (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M&L for preparing surfaces of steel and iron work , treated with two coats of tar or coal tar black paint over 10cm width or girth complete all as specified and directed.

Demolition of Brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

M & L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs and removing to store, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed in SSR Part-I, complete all as specified and directed.

S&F in repair Ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed.

S&F in repair 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Taking down chowkhats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for doors with double rebate including one shop coat and necessary fixing hold fast, lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, 20mm graded crushed stone aggregate as in filling back of pressed steel chowkhats complete all as specified and directed

S & F 35mm thick factory made 2nd class hard wood rail and style plain framed, paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick glazed & Skelton shutter of 2nd class hard wood open rebated & prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/wire mesh etc size of members of shutters as SSR Part-I (2010),section 8,clause 8.24 (a), complete all as specified and directed .

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed .

S&F stainless steel hinge, 100mm long, fixed with steel screws with brass/ bronze hinge pin complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete.

S& F 4 mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane.

S& F Stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.40mm and fixed with stainless steel wire staple in complete all as specified and directed.

S&F 125 mm long Stainless steel handle, fabricated type, anodized.

S&F 200mm long stainless steel ,barrel tower bolts of extruded section. complete

S&F 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded sections or cast aluminium alloy.

S&F floor door stopper stainless steel body and tongue, anodized overall length of cover plate of size 140 mm long with hard drawn steel spring complete.

S&F MS 300mm, ordinary door springs including roller and roller plate complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Gde E-165

M & L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint to wooden surface inc one coat of pink primer complete all as specified

M & L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint inc one coat of red oxide primer complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified

S & F galvanized steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor of size 15mm bore complete all as specified

S&F in repair, vitreous China wash hand basin, white, flat back size 550 x 400mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets all s directed.

S&F in repair flat back vitreous china urinal (White), of size 465 x 365 x 265 mm with grating, union for discharge pipe, spreader & 40mm dia PVC waste pipe upto floor trap, complete all as specified and directed.

S&F in repair vitreous china squatting pan " ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest or back inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed .

S&F in repair PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated Pillar tap, cast copper alloy with capstan head, screwed down high pressure with long screwed shank and fly nut, complete all as specified and directed.

S & F 15mm bore PVC water connection 600mm long with brass nuts and fitted to 15mm bore of pipe, complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S & F in repair bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule of size 15mm bore fixed as in repairs complete all as specified and directed.

S&F CP Tubular towel rail, 20mm dia D-type, 60 CM long, between flanges, complete all as specified and directed.

S&F (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches/ fixed to wall or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends, complete all as specified and directed.

S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl fixing of brackets, Knob fancy type fixed with stainless steel screws etc complete all as specified & directed

S&F in repair steel rolling shutters, 1.25mm thick with ball bearing, gear operated type with bevel gear ox and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F Ball bearing for rolling shutters complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in roof kerb or mud stopes, padding on roof etc finished even and fair, average thickness 25mm to maintain proper slope complete all as specified and directed.

M&L for rendering/ screed bed 15mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.

Supply only Integral water proofing compound, complete all as specified and directed.

M&L for cleaning of roof slab surfaces including sweeping cleaning & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/Sqm (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25. (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed bed lad and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete & including 10 mm thick (average thickness) cement mortar (1:3) screed, complete all as specified and directed.

S&F Factory made single extruded WPC(Wood Polymer Composite) Solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 65x100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade) calcium carbonate and nature fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwed having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N/mmSq, modules of elasticity 900N/mmsq and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: 1. M.S hold fast/lugs or SS dash fasteners shall be paid for separately. 2.For WPC Solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC(Wood Polymer Composite) Solid door/window/ Ceosetory window & other Frames/Chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade) calcium carbonate and nature fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwed having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N/mmSq, modules of elasticity 900N/mmsq and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: 1. M.S hold fast/lugs or SS dash fasteners shall be paid for separately. 2. For WPC Solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of k value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kgcum and screw withdrawal strength of 1800N (Face) & 900 N (Edge) Minimum compressive strength 50N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. Note: stainless steel but hinges and necessary SS screw shall be paid separately.

S&F aluminium section powder coated of colour as approved for partition partially glazing 5.5mm thick plain/colour glass and PVC completed board 5mm thick fixed with aluminium beading joining cleats, glazing clips, rubber packing section completed all as specified and directed with frame 62x40x2mm & glazing clip 0.7mm thick with rubber packing complete. consisting of with Frame 62x40x2mm and partially glazing with 5.5mm thick plain/ colour glass and partially with PVC board 5mm thick fixed with aluminium beading, joining cleats, glazing clips 0.7mm thick, rubber packing complete all as specified and directed.

S&F Butt hinges, 100 mm long stainless steel with galvanized mild steel hinge pin, anodized and fixed, 1.6 to 2mm thick complete all as specified and directed.

S&F 250mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

M&L for preparation of old steel surface of any description exc. 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for 10mm thick Cement plaster (1:4) on concrete Surface finished even & fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces on internal of walls by applying two coat of oil bound distemper emulsion over 2-3mm thick wall care putty all as specified and directed .

M&L for providing and applying plaster of Paris putty of 1-2mm thickness over plaster surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Acrylic smooth exterior weather coat paint of required shade, New work applied @1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.2kg/10Sqm) complete all as specified and directed.

M&L for complete removal of old plastered wall surfaces and applying two coats of Acrylic smooth exterior weather coat paint of required shade ; New work applied @1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.2kg/10Sqm) and over 1 mm thickness of Paris putty of 1mm thickness complete all as specified and directed.

M&L for applying one coat of OBD, white or tinted incl prepared old plastered surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for demolition of Cement concrete reinforced in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work

M&L for RCC 1:1.5:3, Type A-1, using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

M&L for 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirming complete all as specified and directed.

All as per Ser item No107.00 above but for 5mm dia and over up to 10mm dia bars as in stirrups, spacers binders etc complete all as specified and directed.

S&F in repairs, Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), P or S trap, all as specified.

S&F health faucet (ABS Body) with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F CP toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repairs Brass CP Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe complete all as specified and directed.

S&F in repairs stainless steel grating open able 100mm sqmm size with/without hole including fixing with white cement complete all as specified and directed.

S&F in repair fancy type, chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 20mm bore, complete all as specified and directed.

S & F in repairs PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door complete all as specified and directed.

S & F in repairs PVC (SWR) junction single, (Single T 75mm), equal or unequal with access door complete all as specified and directed.

S&F in repairs PVC (SWR) bends, for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F in repairs PVC (SWR) bends, for 75mm bore pipes, with access doors, complete all as specified and directed.

S&F Ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

Excavation over areas n.exc 1.5m deep and getting out in hard/ dense soil, complete all as specified and directed.

M&L for broken stone or boulders as hardcore of gauge exe 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100mm thickness, M-50 Grade with grey cement and pigment, laid over and including 40 mm thick (average) sand cushioning and joints filled with sand complete all as specified and directed.

Excavation in trenches in hard/dense soil n. exc 1.5m wide and n. exc 1.50m deep and getting out complete all as specified and directed

Demolition of cement concrete (un-reinforced ) in ground floor and paving not exc. 15 cm thick (below and above ground level) complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass-concrete, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate for Man hole cover slab & set in cement mortar 1:6, complete all as specified and directed.

Use and waste of form work to sides & soffits of floor slab or roof beam beam haunching girders bressumers lintels cantilevers shelves including over hang supports etc. rough finished surface, complete all as specified and directed.

M&L for concrete bed to drain pipes of 300mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6, type C-2, complete all as specified and directed.

M&L for reinforced concrete pipes, class NP-2, laid and jointed complete with collars 300mm bore complete all as specified and directed.

Removing excavated materials to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in incl spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Surface excavation and averaging 15cm deep and getting out in hard & dense soil, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of OBD over 1-2mm (av-1.5mm) thick wall care putty to achieve smooth and even surfaces and complete all as specified and directed .

M&L for complete removal of existing treatment and applying two coats of cement base paint on wall incl preparation of surfaces, complete all as specified and directed.

Cutting opening through brick walls built in cement mortar for making door, windows and other openings complete all as specified and directed.

Forming jambs to opening of brick walls including cutting, toothing and properly bonding into old work including facing, jointing & pointing to match existing surface built in cement mortar 1:4 complete all as specified and directed.

Making good under cills or over lintels including all pinning as necessary in cement mortar 1:4 complete all as specified and directed.

Use and waste of form work to chajjas or any other RCC work for fair finish surfaces all as specified and directed .

M&L for M-25 design mix RCC 1:1.5:3, type A-1, using 20mm graded crushed stone aggregate as in beams cantilevers bressumers lintels over 1.5 m span etc. complete all as specified and directed.

M&L for RCC 1:1.5:3, type A-1, using 20mm graded mechanically crushed stone aggregate as in chajjas/lintel/beam etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified

Brushing neat cement slurry with 3.0kg of cement per sq. Meter complete all as specified and directed

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed.

S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and directed.

S&F floor door stopper aluminium body and tongue, anodized overall length of cover plate of size 140 mm long with hard drawn steel spring complete all as specified and directed .

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm all as specified as specified.

S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required and binding with ms wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified as directed.

M&L for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with gray cement and pigment to match complete all as specified and directed.

M&L for Continuous precast cement concrete solid block 1:3:6, type C-1, using 20 mm graded crushed stone aggregate set in CM 1:4 edging laid on end vertically including necessary earth work, and tamping earth around solid block and removal of surplus soil to a distance n exc 50 meter, complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Fan, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendants, regulators, sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit including making good the disturbed portion/surface complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed size 1.5 sqmm with concealed Conduit PVC medium grade not less than 20mm dia with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed.

All as per Srl item No 156.00 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per Srl item No 156.00 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per Srl item No 156.00 above but for 3 pins socket outlet 15 Amps independent with 2.5 sqmm incl continuous earthing with multistandard copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.

S&F switch piano flush type/ Bell push, 5 Amps, single pole one way complete all as specified and directed.

S&F socket 3/5 pins, 5/6 Amp, flush type piano (multi purpose) complete all as specified and directed.

S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S & F for electronic fan regulator step type, 240V, SP, one module suitable for ceiling fan, complete all as specified and directed.

S&F ceiling rose, PVC/ polycarbonate isolated body of size, 65x20mm, three terminals complete all as specified and directed

S & F Distribution board (DB's) 8 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCB TPN, as incomer complete all as specified and directed.

S&F MCB SPN 32 amp rating 240V, 10KA B-Curve incl all terminals and fittings etc., complete all as specified and directed.

S&F MCB SP 6-32 amp rating 240V, 10KA B-Curve incl all terminals and fittings etc., complete all as specified and directed.

M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanized earth lead wire of 4.0mm dia at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through GI pipe for protection of earth lead wire incl PCC earth pit 1:3:6, type C-2, with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing and dismantling, taking down old unserviceable earthing all as directed. Note: (I) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame, RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, earth lead exceeding 7.5 mt are measured and paid separately.

S&F LED light fitting 1x9W/ 1x10W bulkhead luminaries incl LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED lights fittings 1 x 20W, 220V, AC decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F lamp holder PVC body with back plate complete with 9 watt LED lamp complete all as specified and directed.

S & F Distribution board (DB's) 4 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCB TPN, as incomer complete as specified and directed.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS-H cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified and directed

JASWANT SINGH ANAND

M/S Dahiya Builders

Neelkanth Engineers