PROVN OF LADIES TOILET NEAR BLDG NO J/3/79 IN STN CSD NEAR GATE NO 3 AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R I UNDER GE PANAGARH

Amount

Surface dressing n.exc (Not exceeding) 15 cm deep and getting out soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L for broken stone or boulders hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) as Chajjas complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

All as per item No 11.00 mentioned but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions for fair finished surfaces of concrete complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surface complete all as specified and directed

M&L for old size brickwork with fly ash bricks straight or curved on plan to any radius built in CM (1:6) complete all as specified and directed

M&L for old size brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose complete all as specified and directed

M&L for Rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick/concrete surfaces finished and smooth without using extra cement and using water proofing compound admixture as per manufacturer's instruction, complete all as specified and directed. (Note : WPC will measuered and paid separatly under relevant item of schedule)

Supply only liquid Water proofing compound complete all as specified and directed (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for Rendering 15 mm thick cement plaster in CM (1:6) on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed..

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar (1:3) finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 5mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:3) finished even and fair including using water proofing compound admixture as per manufacturer's instructions, complete all as specified and directed. (Note :- WPC will measuered and paid separatly under relevant item of schedule. complete all as specified and directed)

M&L for providing water proofing treatment with a layer of APP based polymeric membrane 3mm thick minimum weighing 3.60kg/sqm reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc, complete all as specified and directed. (Note :- The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction )

M&L for prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer complete all as specified and directed.

M&L for prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in levelling of floor for receiving screed bed for floor finishes complete all as specified and directed

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in CM 1:3 on brick or concrete surfaces complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)

S&F tubular towel rail brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F 75 mm size butt hinges extruded aluminium alloy/Stainless steel with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed

S&F 150 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed

S&F anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

S&F Sheet glass 5.5 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed

S&F as in vitreous china wash down closet pan, pedestal pattern pedestal pan and trap (excluding flushing cistern and flush pipe), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). Make- Hindware, Parryware, commander (Sim Line) incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern all as specified and directed.

S&F vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ccomplete all as specified and directed.

S&F stop valve/angle valve cast copper alloy fancy type chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.

S&F for CP Grating square with hole 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint , laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed

S&F PVC (SWR) junction single (single T) equal or unequal of 75 mm dia complete all as specified and directed.

S&F for PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors all as specified and directed .

S&F PVC SWR bends of 110 mm bore complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

M&L for 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directedcomplete all as specified and directed.

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per item No 66.00 mentioned above but 25 mm outer dia complete all as specified and directed

S&F Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) in surface channels and drains and Manholes complete all as specified and directed.

M&L for Extra for forming 30 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 50mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver coloured block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.00m dia x 6.00m effective depth complete all as spd and directed

M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for precast cement concrete Type B-1,1:1.5:3 (using 20mm graded crushed stone aggregates) set in cm 1:4 as in mahhole cover etc complete all as specified and directed.

Excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soils complete all as specified and directed.

M&L for 200 mm thick Kankar or laterite,with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 ( i.e. 10% fly ash,30% clinker & 60% stone dust ) laying in layers n.exc 30cm thick in each layer, watering, ramming and compacted with vibratory / power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engr-in-charge .

M&L for 100mm thick PCC type C-2, 1:3:6 (using 40mm graded stone aggregate) in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for Providing and laying at or near ground levelfactory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M&L for preparation of new surfaces of brick, stone, concrete and asbestos cement or plaster surfaces of any description not otherwise described over 10 cm width or girth and applying Two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/dense soil complete all as specified and directed.

M&L for cement concrete type (C-2) 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete and as in post holes complete all as specified and directed.

S&F MS work as in posts, struts, roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel, flat & hollow sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S&F wind ties for roof including securing bolts, curring tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or reviting and similar works confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Chajja, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.

M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in coping, kneelers, apex stones, bed plates etc complete all as specified and directed.

M&L for extra for forming fair finish drain channel inner grith exc 30cm but n.exc 45 cm in cement concrete using extra cement complete all as specified and directed

M&L for 40mm thick PCC type B1, 1:2:4 (using 12.5mm graded stone aggregate) as in surfaces channels and drains etc complete all as specified and directed.

Cutting holes in prefab shelter walls (exc 0.90m width n.exc 1.20 for inserting hold falsts or other fastener for fixing of steel window complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410W (Gde E-250) quality-B complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc complete all as specified and directed.

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each panes complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer of any description not otherwise described over 10cm width or girth complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

E/M PORTION M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 104.00 above 5 Amp socket on Independent board with other switches complete all as specified and directed.

M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F LED light fitting 1x 20 W LED light AC decorative box type with driver , holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.

S&F LED light fitting 2 feet 1x 10 W LED light AC decorative box type with driver , holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.

S&F security light fittings 35 watts 230v, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete suitable for service brecate dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F exhaust ventilation fan with louvers of sweep 300mm,230 volts 1200 Rpm, with blade and frame and loures sturdy engineering plastic complete with ,ISI marked complete all as directed by Engr-in-Charge.

S&F in repair LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB, MCCB, PANAL of any rating).

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN 32/40 Amps, 'C' curve, 240 Volts, ISI marked and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F sheet metal enclosure with 20 Amp Mcb and two pin and earth plug and socket complete with one single pole MCB all as specified by Engr-in-Charge.

S&F storage type water heater 25 Ltrs BEE 5 Star tated with all connecting items all as directed by Engr-in-Charge.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmmx2core laying properly in treanche all as directed by Engr-in-charge

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L for burnt clay fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed

S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc complete all as specified and directed.

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut complete all as directed by Engr-in-Charge

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engr-in-Charge Make : Vectus/Sintex/Prayag

S&F 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings all as specified & as directed including taking down old unseviceable pipe complete all as specified and directed.

S&F 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.

S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral,4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor, 1100 vlts grade, crsectional area 10 sqmm 2 core complete all as specified and directed Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified, complete all as specified and directed.

S&F Solar All-In-One LED street light 20 watt @ 125 lm/W, D2, 60 Wp, PIR, 24 AH Lithiun Ferrous phopshate battery, Mono crystalline Panel, luminaire arm and 6 Mtr tubler module mounting structure pole including PCC 1:2:4 (20 mm graded stone aggegate) for fixing of tublar complete all as specified and directed.

ANSH CONSTRUCTION (BID ID -3093157)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3093559)

M/s S A TRADING (BID ID -3093564)

M/S S M ENTERPRISE (BID ID -3093571)