Renovation of 10 no rooms of BBMB Guest House Talwara Township

Amount

Dismantling brick work tile masonry or tile lining[CSR Item no. 8.5(b)]

Dismantling concrete Cement concrete plain1:2:4 mix [CSR Item no. 8.6(d)]

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.[CSR item no.8.26](a)Doors of area 3 sqm and below.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.[CSR item no.8.26](b) Windows of area 3 sqm and below

Scraping of Cement Plaster. [CSR Item no. 8.31(c)]

12.5mm thick cement plaster 1:4 [CSR Item no.15.9]

First class burnt brick work laid in cement sand mortar 1:6 in first storeyupto 4 metres above plinth level.[CSR Item No. 11.4(I)]

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect Painting CSR Item no.30.95]

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)[CSR Item NO.14.115(i)] (a)

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.[CSR item No. 14.72]

Dismantling glazed tiles (to be carefully removed).[CSR Item no.8.35]

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. [CSR Item no.14.128]

providing and fixing P.V.C. wall paneling as per drawing specification and entire satisfaction of engineer in charge (Quotation attached)

providing and fixing P.V.C. ceiling as per drawing specification and entire satisfaction of engineer in charge (Quotation attached)

Providing and fixing ceiling light (size 9”x9”) (As per Quotation) (

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 2.5sq.mm (Un-sheathed[CSR Item No. 34.09(iii)]

Scraping of White wash and colour wash [CSR Item no. 8.31(a)]

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications Wall [CSR Item no.16.73

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade [CSR Item no.16.10]

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. [CSR Item no.16.18]

Kapoor Sail wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. [CSR Item no.17.15 (xiv)] (A)Double rebate(60mmx150mm)

(B)single rebate(60mmx100mm)

Deodar wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles bolts hasp with staple but including the labour for fixing them[CSR Item no.17.12] (i)(a) 30mm thick

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II CSR Item no.17.27] (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-(iv)35mm thick

Providing and fixing bright finished brass door latch with necessary screws etc. complete[CSR Item no.17.22(iii)]

.Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm [CSR Item no.17.22(iv)]

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) [ CSR Item no.17.23(i)]

Providing and fixing Curtain fitting with steel pipe and all other accessories with latest designed material [Quotation]

Providing and fixing of latest design and furnish look veneer sheet (as per Quotation)

Fancy ceiling fan (as per Quotation)

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fitting complete in all respects15mm internal diameter pipe line. [CSR item No.28.63(a)]

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fitting complete in all respects 20mm internal diameter pipe line.[CSR item No.28.63(b)]

Dismantling sanitary fixtures such as European/ Indian/ Orissa W.C., PVC/ China ware cistern, wash hand basin, urinal pot, sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. Complete in all respect as required by Engineer-in-charge.Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock [CSR item No. 30.88(f)]

Dismantling H.C.I. specials including dismantling of lead joints including cartage/ disposal within 5km.100mm I/d H.C.I. specials.[CSR item No.-30.87(a)]

Providing ,laying, fixing and jointing of PVC pipe as per ISI 4985( ISI marked with prior approval of Engineer –in-charge) along the tranches and laying the same in trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 110 mm o/d PVC pipe of 6 Kgf/sqcm. [CSR item No. 28.13(XV) including specials(i.e. CSR- 28.18 (a))

Providing, fixing and jointing G.I. Union couplings (of approved made with the approval EIC) as per IS 1879 in G.I. pipe lines complete in all respect. 20mm i/d G.I. Union [CSR item No. 28.40(b)]

Providing, fixing and jointing ISI Marked Gun-Metal peat valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. pipe lines laid in the ground or inside buildings including all carriages complete. 20 mm I/D Gun metal peat valve heavy pattern[CSR item No.-28.43(b)]

Cutting holes up to 23 cm square through B.B in cement walls or stone masonry wall in cement for pipes and making good the same & finishing according existing finish where required.(CSR-28.56-b) Through wall 22.86 cm thick.

Cutting Chase in brick walls in cement or in floor for embedding G.I or C.I pipes line and making good the same to its original condition.(CSR—30.85) a. Size 75x75 mm.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B- Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete [CSR Item No. 28.35(a)]

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B- Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete 20mm i/d.[CSR Item No. 28.35(b)]

Providing and fixing in position C.P brass extension piece 25mm long to 50 mm long of approved make (To the Approval of Engineer-in-charge) with various fixtures complete in all respect ( CSR 30.64 B)( i)

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P brass 15mm concealed stop cock with adjustable wall flange.[CSR item No. 30.69 A (iv) )]

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P brass 15mm angular stop cock with wall flange[CSR item No. 30.69 A (iii) )]

Providing and fixing divertors of approved make (To the Approval of Engineer-in-charge) for bath and shower system complete in all respect. Single lever concealed divertor for bath and shower system (High flow) (CSR-30.70 c)

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. CP bras fitting C.P. brass overhead shower Φ180mm round shape single flow with shower arm with 20mm i/d Inlet and 300mm long round shape with 900 bend with flange.[CSR item No. 30.69 A (x) )]

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 550 mm x 400 mm x 815 mm CSR item no 30.32 (ii)

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect( CSR item no. 30.43 (i) Vitreous chinaware standard white pedestal for wash hand basin

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge)instead of C.P. brass pillar tap complete in all respect. (CSR item No. 30.38)

Providing and fixing in position concealed cistern including flushing plate of approved make (to the entire satisfaction of Engineer-in-charge).complete in all respect. [CSR item No. 30.6 c]

Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Chinaware wall mounted E.W.C without cistern including seat cover complete in all respect [CSR item No. 30.5b]

Providing and fixing stainless steel Health faucet complete in all respect. (CSR- 30.24)

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P brass bib cock with wall flange.[CSR item No. 30.69 A (ii)]

Providing and fixing in position C.P Brass bath tub spout with wall flange of approved make (To the approval of Engineer-in-charge) complete in all respect. (CSR30.52)

Providing and fixing in position CP Brass Grab Bar of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.(CSR-30.12)

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. [CSR item No. 30.80]

Providing and fixing in position 5mm thick beveled edge mirror of superior glass(of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in-charge)(CSR-30.61(a)) Size 600mmx450mm

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. (CSR-30.20)

Providing and fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (CSR-30.72) (b) PVC tube connection of size 15mm x 450mm with C.P Brass nut.

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories: C.P. brass toilet roll holder with flap.[CSR item No. 30.69 B (iv)]

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories. C.P. brass towel rail 600 mm long .[CSR item No. 30.69 B (i)]

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P. brass towel rack 600mm long with lower hangers.[CSR item No. 30.69 B (vi)]

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P brass towel ring square .[CSR item No. 30.69 B (ii)]

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P. Glass Shelf 600mm long .[CSR item No. 30.69 B (v)]

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories C.P. brass soap dish holder with glass dish .[CSR item No. 30.69 B (iii)]

Providing and fixing in position C.P/ Aluminum Khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P brass screws and rawl plugs etc. complete in all respect. C.P. brass khunti with 6 pegs [(CSR- 30.63)c]

Providing and fixing in position storage type automatic electric water heater pressure non pressure type thermostatically controlled single phase vertical wall mounted of approved make (to the approval of engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.(CSR 30.101(a) 25 Ltr capacity water heater.

Providing and placing in position on terrace ( at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. (CSR-30.97-A (i)) Triple layer Tanks.

Providing and fixing in position G.I tank Nipple of approved make (to the approval of Engineer-in-charge) complete in all respect. G.I tank nipple 20 mm i/d (CSR-30.98(b))

Providing and fixing in position automatic brass ball cock in Tanks. brass ball cock with rod and plastic ball 20mm i/d(CSR-30.96A) (ii)]

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES (CSR NO. 34.02) Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- CSR Item No. 34.02 Wiring fan point (Without fan box) 34.2 i)a

Wiring light point (34.2 ii)

Wiring call-bell point( 34.2 iii)

Wiring 6 Amp. wall socket point (34.2iv)

Wiring 16/20 Amp. power plug control point (34.2 vi)

PVC INSULATED FR COPPER CONDUCTOR CABLES: ( CSR No. 34.09)Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:Overall size 2.5sq.mm (Un-sheathed) ( 34.09 iii)

Overall size 4sq.mm (Un-sheathed) ( 34.09 iv)

Overall size 6sq.mm (Un-sheathed)( 34.09 v)

MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's: ( CSR NO. 34.16) Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- : ( CSR NO. 34.16 A)MCB Single Pole 6-32amp. (10kA, Curve-C)( 34.16 ii)

MCB Four Pole 50, 63amp. (10kA, Curve-C) (34.16 xvi)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's: ( CSR NO. 34.17)Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- ( CSR NO. 34.17) SP&N Double Door Distribution Board 4 way Each ( 34.17 i )

TP&N Horizontal Double Door Distribution Board 12 way each (34.17 viii )

DISMANTLING WIRING POINTS & FITTINGS: ( CSR No. 34.39 ) Dismantling old wiring points including necessary repairs to wall etc:- ( CSR NO 34.39 )Fan, light or call bell point (CSR No. 34.39 i )

Wall socket, power plug point( CSR No. 34.39 ii)

Bidder Name

Amount in Words

om namah shivay construction co.

rattan builders pvt ltd

vikram sachdeva

om namah shivay construction co.

vikram sachdeva