REPAIR/MAINT TO CERTAIN B/R WORKS ALONGWITH PERIODICAL SERVICES FOR VARIOUS MES PUMP HOUSE, INSTALLATIONS AND OFFICE BLDGS UNDER AGE(I) PACHMARHI AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

Preparation of plastered old decorated wall surfaces and applying one coat of white washing complete all as specified and directed.

All as per item No 1 above but two coat complete all as specified and directed.

Preparation of plastered old decorated ceiling surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white washing complete all as specified and directed.

Preparation of distempered or painted wall surface such as washing, rubbing down and stopping of distempered and painted surface and applying one coat of distemper oil emulsion white or coloured complete all as specified and directed.

Preparation of distempered or painted wall surface such as washing, rubbing down and stopping of distempered and painted surface and applying two coat of distemper oil emulsion white or coloured complete all as specified and directed.

M&L complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted including clearcolle on surfaces for prepatory to distempering, complete all as specified and directed.

M&L complete removal of existing treatment from wall surface and applying 1mm thick cement base putty "Birla Wall Care Putty or equivalent approved speficied make" on plastered surfaces including preparation of surfaces and applying two coats of distemper oil emulsion complete all as specified and directed complete all as specified and directed.

Preparation of plastered old decorated wall surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed.

Preparation of plastered old decorated wall surfaces including brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of colour wash complete all as specified and directed.

M&L for preparation of old cement based surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L complete removal of existing treatment from wall surface and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for one coat of french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works complete all as specified and as directed.

Preparation of old surfaces wooden of any description not other described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick/ stone wall etc including racking out joints hacking for key, scrubbing down with water as described.

M&L for 15mm thick plastering on other than fair faces of brick wall in CM (1:6) surface finished even and smooth (without using extra cement)complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L complete removal of existing treatment from wall surface and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall in CM (1:6) surface finished even and smooth (without using extra cement) complete all as specified and directed.

Preparation of preparation of new plastered surfaces of wall and applying two coat of distemper oil emulsion white or coloured complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with modular size full brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

S&F in repair 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of area not exc 1.5 sqm each size complete all as specified and directed.

All as per item No 27 above but area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description, of Area not exc 1.0 sqm each size complete all as specified and directed.

All as per item No 29 above but area exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed.

S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood glazed and skeltron door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

S&F 30mm thick factory made second class hard wood glazed and skeltron window shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (b).

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/ clading to wall, fixed with self tapping screws, all as specified and dir.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 150 mm long anodised aluminium handles cast type of following size complete all as directed and specified.

All as per item No 41 above but 100 mm long complete all as specified and directed.

S&F 200 mm long anodised aluminium barrel tower bolts of extruded section of following size complete all as directed and specified:-

All as per item No 43 above but 150 mm long complete all as specified and directed.

S&F anodised aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of 250mm long size complete all as specified and directed.

S&F 100 mm long butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed.

All as per item No 46 above but 75 mm long complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles not exc 200 cucm each complete all as specified and directed.

M&L for chequered cement concrete tiles, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in cement mortar (1:4) for 25cm x 25cm x 25mm thick size of tile complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

S&F rolled mild steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be exc 0.11 Sqm but not exc 0.18 Sqm. complete all as specified and directed .

M&L for coloured, glazed ceramic tiles size 350x450x 7-8mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in CM (1:3) all as specified and directed.

S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

Supply only 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

Disconnecting and dismantling of water storage tank and removing from the site of Capacity exc 250 Ltr but not exc 500 Ltr of tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of Capacity 500 Ltrs of tank complete all as specified and as directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of 20mm bore ( minimum weight 210gms) complete all as specified and as directed .

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. MAKE: Parryware, Model E8090 SLIMLINE or equivalent model of make as specified in appendix.

S&F in repair 15 mm bore stop valve chromium plated, fancy type, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15 mm bore stop valve PTMT (min wt 90 gm), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair 15 mm bore bib taps, cast copper alloy, chromium plated with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15 mm bore bib tap of standard PTMT (min wt 90 gm), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed .

Taking up or down steel tubing and connections 15mm bore incluidng cleaning for refixing or removal to store complete all as specified and directed .

All as per item No 69 above but 20mm bore complete.

S&F tubes 15mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete.

Ditto as item no 71 above but fixing only complete all as specified and directed .

S&F tubes 20mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete.

All as per item No 73 above but fixing only complete all as specified and directed .

S&F in repair PVC connection 15 mm size with PTMT nut of 450mm length complete all as specified and directed .

GHASI RAM SAHU

SUBIR KUMAR ROY