Annaul Maintenance of 3.3 KV overhead line of 4 No. Colony feeder and 440 Volt overhead line of 2 No. 3 No. and 4 No. and Sub-Station colonies of Kathara

Amount

Supplying & erection of 11 KV disc insulator for 11 KV over head lines with galvanized insulator fittings, ball socket type and complete with galvanized strain clamps, bolts, nuts washers etc as required.

Erection of metallic pole of following length in cement Concrete 1:3:6 (1 cement: 3 coarse sand :6 graded stone Aggregate 40 mm nominal size) foundation including Excavation and refilling etc. as required) (Above 10 Mtr and upto 12 Mtr)

Supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 meters long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60cm), 7/4.00 mm dia G.I stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 oarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling as required.

Supply and erection of 11 KV pin insulator complete with large steel head G.I pin, nuts, washers etc as required

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.

Erection of angle iron/channle iron cross arm on wood/ RCC/PCC/ steel tubular/rail pole etc. as required

Erection of all aluminum conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc as required.

Erection of all aluminum conductor of 7/3.10mm to 7/4.00 mm diameter including binding etc as required.

Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Supply and erection of PVC/rubber phase separator for 440 V Overhead line

Total impact of GST for the purpose of CTC

Y K ENTERPRISES

M.k. Traders

RAHIM CONTRACTOR